Your cart is empty.
Your cart is empty.Customer
2025-08-27 14:47:38
Good leader material. I am not using for fishing. Using as theft protection with display items. Works fine.
Robin L.
2025-07-27 13:22:07
It was hard to guess the actual gauge of the wire itself as I had a unique problem to solve. I used this material to rig the flying wires in a scale 55" wingspan RC biplane. Being able to make sharp turns and remain straight between eyelets is not an easy task. The finished project is remarkably handsome. Just the right diameter and does not fray when cut.
Mark in Texas
2025-06-13 13:36:34
Seems to be very strong wire. Made some leaders for salt water fishing. Bought a crimping set with it also. Can make the ones you prefer.
Customer
2025-06-03 10:04:07
Stays together well and is limber for its strength.
Reymundo Lopez
2025-03-10 11:43:05
They did the job
paul (ann arbor)
2025-02-22 19:00:45
I've gone through a couple rolls of the 100# wire. It probably measures a little less than advertised. The included crimp sleeves are light weight. Consider getting Sea Striker brand sleeves if you need this to hold up.For the 100# wire, the included sleeves are 1.7mm ID (corresponds to Sea Striker size #3). You can get three passes of the wire through this size sleeve.Crimp the middle areas and avoid crimping the ends down as this may compromise the wire.
GPBell
2024-12-27 15:53:13
But I should have ordered bigger. For camera lens holder connected to lens bag so I done lose lens cap….
Andrew Williams
2024-12-18 16:03:09
No matter how hard you crimp them they still get pulled out, the cable is okay though.
Recommended Products
