Your cart is empty.

5pcs 433MHz Automatic Sliding Gate Remote Control Opener, Electric Cloning Gate Garage Door Opener Universal Gate Remote Control Fob Replacement Electric Rolling Driveway Gate Opener Closer Remote

4.6 (6) Write Review

Free shipping on orders over $29.99

$31.50

$ 16 .99 $16.99

In Stock

Qty.:

Wide Compatibility: Open any 433.92 MHz sliding gate from a distance with this handy remote control. PLEASE NOTES: Be sure to check the applicable chip type before purchasing!!!
Copy the IC Model: PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, EV1527. PLEASE NOTES: Be sure to check the applicable chip type before purchasing!!!
Easy to Clear Old Codes: Simultaneously long press the A and B key on the universal gate remote until the LED indicator keeps flashing, then you can let go, you could press any keys to test, if the LED indicator blinks instead of keeping flashing, which means codes have been cleared.
Methods to Duplicate: Place the universal remote for gate opener and old remote control side by side; Press the A button (Do not move); Then press the corresponding button of the old remote control to copy; The LED indicators will flash about 3 times, then you can let go; Reset the BCD key in the same way as the A key.
4 Keys to Control: There are 4 keys on the remote controls for gates to open, close, bell and call the police. Convenient and practical, which are suitable for rolling shutter door, rolling gate, telescopic door, garage door, road gate, etc.

Product Description

5 PCS 433MHz Automatic Sliding Gate Remote Control Opener

IMPORTANT

PLEASE NOTES: Be sure to check the applicable chip type before purchasing!!!
Not fit for C-O-Z Sliding Gate
Product is not compatible with all the gate,please check your gate chip type before purchasing!!!

Our product can copy the IC model: PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, EV1527

Troubleshooting Guide for Wire-less Remote Control Issues
Product Name: Universal Garage Door Opener Remote Control
Function: Automatic sliding door opener, universal garage door opener replacement, electric rolling driveway gate opener.
If you encounter issues with your product not working, follow these detailed troubleshooting steps:
1. Check Frequency Compatibility Ensure your remote is set to 433 MHz. Our remote controls operate exclusively on this frequency; other frequencies will not work.
2. Verify Original Remote Functionality Make sure that your original remote control functions properly before attempting to clone or replace it. This helps rule out any existing issues with the system.
3. Special Rolling Codes Issue If you experience a situation where the remote works only once and then stops functioning ("They will not work with the board."), it indicates the use of special rolling codes. These codes change each time, making consistent functionality impossible. Avoid using our remotes with systems employing such codes.
4. Ensure Correct Chip Support Verify that your system uses one of the supported chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (some codes), HCS300\HCS301 (some codes), and some microcontrollers.
5. Correct Reset Procedure To reset the remote, press and hold both "A" and "B" buttons until the LED blinks three times. Release "B" but keep holding "A," then tap "B" three more times. The LED will flash rapidly, indicating all data has been cleared. Post-reset, pressing any button should not light up the LED.
6. Proper Cloning Method Hold your original remote in one hand and the new remote in the other, placing them as close together as possible. Press the corresponding buttons on both remotes; the LED should flash quickly three times, signaling successful cloning. For weaker signal remotes, place them back-to-back during cloning. Avoid interference sources and re-clone after resetting if necessary.
7. System Compatibility Check Confirm compatibility with your specific opener model. For example, if you have a CO-Z opener, ensure it supports the same frequency and chip type as our remote.
8. Battery Installation Double-check that the batteries are correctly installed and fully charged. Incorrect battery installation can prevent the remote from operating correctly.
9. Environmental Interference Be aware of potential environmental interferences such as nearby electronic devices or structures that might block or interfere with the signal. Moving to an open area away from obstructions can improve functionality.
10. Seek Professional Help If after following all steps your remote still does not function, consider reaching out to customer support or consulting with a professional technician. There may be underlying issues with either the remote or the receiver that require expert attention.
By systematically addressing each point, you can identify and resolve most common issues encountered with wireless remote controls.

Adan

2025-07-18 13:51:46

I purchased this thinking it was good deal. But at the end of the day. I couldnâ€™t program it. Even hire a tech. And said the product is to cheap it doesnâ€™t put enough reception for the gate to open it

Tom Welch

2025-05-20 16:45:56

Did not work on my gate opener

Valeria Figueroa

2025-05-02 16:30:11

Dont waste your money. They dont work, I tried everything and couldnt program them.

leonela

2025-01-29 14:05:33

Trash remotes could not program to any gate openers. Waist of money! Trash!!! Would give ZERO stars if I could.

Customer

2025-01-12 10:12:00

dont waste your time. This is a joke

Bertha cortez

2025-01-05 20:40:35

They don't work on my gate opener. I need to return them.

Shopping Cart

Your cart is empty.

5pcs 433MHz Automatic Sliding Gate Remote Control Opener, Electric Cloning Gate Garage Door Opener Universal Gate Remote Control Fob Replacement Electric Rolling Driveway Gate Opener Closer Remote

Product Description

5 PCS 433MHz Automatic Sliding Gate Remote Control Opener

IMPORTANT