Your cart is empty.
Your cart is empty.Product Description
What is a 3D marker?
3D Scanning marker is a small sticker or magnet with an image of a black or white dots printing on it. A 3D scanner uses these “high-contrast”objects to determine its location. Markers are usually applied on (or near) the object being scanned, to increase accuracy and repeatability of 3D data.
Please make sure that HogarDeco is officially authorized genuine products, other stores are counterfeit products, please verify Hogardeco store purchase before placing orders
3D Scanning Markers, Why are they important ?
Markers reduce the possibility of losing tracking during scanning.in another word to say,By using markers, you do not lose tracking during scanning,so the process is faster and predictable.They also ensure high accuracy and repeatability of results.
What else should I know about markers?
Here are a few tips for scanning with your scanners and markers. whatever your laser scanner in industrial scanning or infrared white scanner in consumer 3D scanning.
- At any given time during scanning, the scanner needs to see minimum 3 markers in every frame. When it doesn't, scanning will automatically stop.
- Although 3 markers per frame is the minimum, the optimal number is 5. That is because in certain circumstances, even if the marker is visible to the camera, the software doesn't recognize it as such.
- When affixing markers, apply them on flat areas of the object and not on sharp edges of the object. Also, that the scanner might sometimes not see a marker when looking at it from an awkward angle.
Why do we need 3D Scanner marker points ?
Markers are needed for accurate and easy 3D scanning. They actually solve two separate issues: difficulty during scanning and difficulty attaining high accuracy on large object
Without markers, the scanner will lose its alignment during scanning and the software will not know how Frame1 is supposed to be aligned to Frame2, Frame2 to Frame3 and so on… The software will try to align all frames using the objects’ unique geometry. However, this guesswork doesn’t always produce great results and in many cases, especially on objects with large flat surfaces and no unique geometry, even the most sophisticated algorithm will fail.
When to use 3D Scanning markers?
You would need markers to scan a flat surface with little or no geometry, and black color objects.
When not to use 3D Scannr markers?
You don't need markers if you are scanning an object with lots of geometry like humans or statues.
How to use 3D markers when scanning small item?
For smaller items,you can place markers around the object,instead of on the object.
Why does these reflective Dot Sticker make scanning easier?
By using markers, you do not lose tracking during scanning,so the process is faster and predictable
How to select what size is the best to fit your for 3D scanning ?
The size of the tracking stickers for 3d scanner depends on which 3D scanner and measuring volume is used for measuring your objects,Basically to say: the larger the item, the bigger the points have to be applied.
Reflective stickers 3D markers for 3D Scanning
Specification:
Inner diameter: 6.0 mm
Outer diameter: 10.0 mm
Round, on adhesive foil as tear-off pad
50 single point marker each sheet,total 12 sheet
How Far apart should they be placed？
Depending on what accuracy you request, markers should be placed randomly approximately 5cm apart for Minimum 10cm for Medium and 15cm for Maximum.
3 pcs markers in each frame is the absolute minimum, but 5 pcs markers are recommended to ensure smooth operations.
What you will get ?
1 pack 12 sheets, Total 600 pcs Reference Points,Tracking Dots 6 mm for your 3D scanning.
Tim G
2025-08-26 16:00:24
Can't have too many of these and it's nice they are good quality too.
James Brewer
2025-08-03 14:54:04
They are dots, they work.
Cindy
2025-07-02 12:21:44
While these do get picked up by my Creality Raptor in blue laser mode, they are clearly inferior to the stock Creality markers that came with the Raptor. I tested by running the scanner over a sheet of these vs a sheet of the Creality markers and these ones flickered far more, meaning less consistent detection. This means it will generally take longer to scan with. You can also tell just by looking at them in the light that they are far grayer than the Creality markers and simply less reflective.
Lonnie stubblefield
2025-06-25 11:12:21
They worked for me
optima b.
2025-06-24 15:14:42
excelente
FUNDICION VENTANILLA
2025-06-18 12:48:48
Conforme con el producto, solo tuve problemas con el delivery ya que llego fuera de fecha.
HauzKat
2025-06-07 17:53:47
Sheets of tracker stickers, they’re nice and sticky and somewhat reflective. Make sure you use these in either direct or good lighting
Ashley
2025-05-04 16:39:43
The LEDGM 800 pcs 6mm 3D Tracking Dots are an excellent addition for users of 3D scanners, such as the Revopoint scanner. These reference point markers are crucial for scanning items with minimal features, providing the necessary points for accurate tracking.Pros:Great value for the quantity provided.Compatible with the Revopoint scanner.Essential for scanning featureless items.Equivalent performance to the original scanner dots.
HM
2025-04-22 14:26:14
scaneo correcto no tuvimos diferencia con otra marca de dots. se ven poco diferentes pero el escaneo es correcto.
Tim G
2025-04-19 11:43:54
Can't have too many of these and it's nice they are good quality too.
James Brewer
2025-04-07 17:13:18
They are dots, they work.
Cindy
2025-03-05 10:08:52
While these do get picked up by my Creality Raptor in blue laser mode, they are clearly inferior to the stock Creality markers that came with the Raptor. I tested by running the scanner over a sheet of these vs a sheet of the Creality markers and these ones flickered far more, meaning less consistent detection. This means it will generally take longer to scan with. You can also tell just by looking at them in the light that they are far grayer than the Creality markers and simply less reflective.
Lonnie stubblefield
2025-02-27 11:55:36
They worked for me
optima b.
2025-02-03 16:05:26
excelente
FUNDICION VENTANILLA
2025-01-29 12:35:39
Conforme con el producto, solo tuve problemas con el delivery ya que llego fuera de fecha.
HauzKat
2025-01-28 21:36:39
Sheets of tracker stickers, they’re nice and sticky and somewhat reflective. Make sure you use these in either direct or good lighting
Ashley
2025-01-11 13:41:53
The LEDGM 800 pcs 6mm 3D Tracking Dots are an excellent addition for users of 3D scanners, such as the Revopoint scanner. These reference point markers are crucial for scanning items with minimal features, providing the necessary points for accurate tracking.Pros:Great value for the quantity provided.Compatible with the Revopoint scanner.Essential for scanning featureless items.Equivalent performance to the original scanner dots.
HM
2025-01-09 14:06:06
scaneo correcto no tuvimos diferencia con otra marca de dots. se ven poco diferentes pero el escaneo es correcto.
Recommended Products