Your cart is empty.
Your cart is empty.Product Description
Compatibility:
- Compatible with following Ford Models:
- Compatible with 2010-2011 Ranger Cab & Chassis
- Compatible with 2002-2011 Ranger Crew Cab Pickup
- Compatible with 1993-2011 Ranger Extended Cab Pickup
- Compatible with 1993-2011 Ranger Standard Cab Pickup
- Compatible with 2001-2003 Ranger Stripped Chassis
Specifications：
- Power/Manual: Electric Power Window Regulator
- Location: Front Left ( Front Driver Side )
- Motor Included: Yes
- Design: One Sliding Bars
- Attachment Type: Bolt On
- Material: ABS Plastic and Metal
Reference OE Number:
- 741-831
- 3L5Z1023209AA
- 3L5Z1523395BA
- 6L5Z1023201BA
- 8L5Z7823395A
- ZZM159560B
Professional Manufacturing
- Bold high-quality steel wire: thick steel cable, strong, durable and wear-resistant, not easy to derail or break.
- High-quality motor: high-quality enameled wire pure copper motor, large torque, high performance, stable lifting.
- High-quality guide rail materials: selected high-quality galvanized sheets, produced through several stamping processes and advanced electric welding processes, with high strength, durability, and resistance to deformation.
Attention
- When wiring, pay attention to the polarity of each wiring harness, and is equipped with a dedicated electric window regulator switch.
- When installing, each link fastener should be fastened and reliable, and washers should be added. The grooves of the guide rails should be kept clean, lubricated, and free of dust layers to prevent them from being seized into the motor during operation in the future.
- At the same time, the front, rear, left and right electric glass lifters have their own directionality, and they cannot be mixed during installation.
Maintenance and Repair of Window Regulator
- During regular maintenance of the electric lifter, all moving parts of the motor should be cleaned. The shaft sleeve of the transmission part should be filled or replaced with lubricating grease. The wear marks and carbon deposits on the surface of the motor steering gear should be sanded with No. 00 sandpaper. Diamond gauze should not be used.
SteelCity Autowerks, Inc.
2025-09-01 16:11:59
Perfect fit; works GREAT
Alberto Lopez
2025-08-24 11:41:16
Worked great 2008 ford ranger.
Stephen Benaski
2025-08-19 13:03:37
Good quality part that fits just like OEM part.The only difference is that the motor is smaller and does not have a bracket to stabilize the mounting of the motor. This is not unusual. All aftermarket replacements have the same set-up.
Donald Tackett
2025-07-24 13:29:44
Works great
Michael
2025-07-22 13:01:12
The factory regulator has twice the motor but these work well enough. It seems identical to Dorman's product, at half the cost. My '94 Ranger used an extra motor brace for the factory unit but that doesn't work with the smaller motor. There is a bit of flexing of the door frame w/o the extra bracing but not noticeable with the door panel on.
Brandy88512
2025-07-21 14:16:27
Exactly what I wanted and needed. Perfect install into a 2000 Ford Ranger extended cab. I will say this: If you don’t own a ¼†rivet tool/gun, you’ll need it to complete this job. Only four rivets are required. When installing the new motor go slowly when getting the rivets into place. Set them halfway while you line up the remaining rivets. If you completely set the rivet you won’t be able to make adjustments to get the remaining rivets into place. Slow and steady wins this race!!!
Sean
2025-04-07 12:06:54
It gets the job done. I guess.The motor is about half the size of the original. And it shows. The motor really struggles to lift the window. But it raises and lowers the glass straight, so it’ll do for now.
B.Gunn
2025-01-12 11:29:06
Great fitment, easy install.
Silvestre pascual
2024-12-04 10:29:57
Resulto excelente ya lo instale yo mismo, no sabÃa lo difÃcil que era pero quedó muy bien lo recomiendo solo verifiquen si es del modelo de Ranger
Recommended Products