Your cart is empty.
Your cart is empty.Product Description
for MacBook Pro A1989 A2289 A2159 Screen Replacement
- When purchasing, please confirm the model and the installation instructions below
Common display faults on the screen
- For problems like display lines, black screen, liquid leakage, black bands, and screen flickering on your laptop screen, replacing it with a new compatible screen can fix the laptop and enable you to keep using it.
Open the bottom of the notebook and remove the back cover
Step 1: Check if the laptop model
- Please check the specific model at the bottom of the notebook to avoid using the wrong model
- Compatible Models: for for MacBook Pro A1989 , A2159 , A2289 , one of these three models.
Step 2: Remove the Bottom Screws
- Use the P5 screwdriver: Remove the 6 screws on the bottom.
- Record screw positions: Note that the screws vary in length and record their positions to avoid mistakes during reassembly.
Step 3: Open the Back Cover
- Use a suction cup: Use the suction cup: Attach the suction cup to the edge of the bottom cover and gently lift it ,
- or use a plastic pry bar, and carefully lift.
- Avoid damaging the clips: Use a plastic spudger to carefully pry open the clips while lifting to avoid damage.
Cut off all power sources to avoid damaging the motherboard
Step 4: Disconnect the Battery
- Locate the battery connector: After opening the back cover, find the battery connector.
- Disconnect the battery: Gently pry open the battery connector using a plastic spudger to ensure the device is completely powered off.
Step 5: Disconnect the Battery
- This is a crucial step. Operating the device without unplugging the external power cord and the battery connector may cause damage. Be sure to disconnect all power sources before proceeding.
- At this location, carefully pry up with a plastic spudger to ensure the battery connector is completely detached.
Step 6: Remove the Screen screws
- Remove the screen screws: Use the T3 screwdriver to remove the screws securing the screen.
Remove the old screen
Step 7: Removing the Screen Connection Cable
- Disconnect the screen cable: Gently unplug the screen cable, being careful not to use excessive force.
Step 8: Remove the old screen shaft chain screws
- Remove the old screen: Take off the old screen from the for MacBook Pro .
Step 9: Install the New Screen
- Connect the screen cable: Insert the new screen's cable into the corresponding port on the motherboard.
- Secure the screen screws: Use the T3 screwdriver to fasten the new screen in place.
Installing a new screen and connecting the LCD cable requires careful and patient attention to detail.
Key steps for screen connection
- After replacing the new screen, connect and plug in all the existing connecting cables one by one,
- Key reminder: The cable connecting the motherboard to the screen needs to be properly docked and plugged in.
- Finally tighten the screw
- If the connector plug is not installed properly, there may be issues such as the screen not displaying. Please be sure to pay attention.
Finally, connect the power supply, tighten the screws, and cover the bottom cover.
Battery connection steps
- Finally, connect the battery cables on the motherboard correctly and perfectly.
- Installation picture instructions for specific details
- To the final step, it is necessary to patiently check all connection conditions to ensure that they are all connected correctly,
- To avoid situations where some interfaces are not properly connected due to carelessness and cannot be displayed.
- Finally, cover the lid and tighten the screws.
Mark A
2025-08-09 10:52:49
Our daughter's screen went kaput on her old MacBook Pro A1706 (got it in 2018), so I got this screen this week to replace it. As of 7-29-23 (a day after I replaced) it works just fine. My daughter says she doesn't notice any difference in brightness, but then again it's been at least a year and a half since she has used it (it was college final paper/final exam time and she needed a quick replacement so we got her a new McB P). So I'm happy with it and will update this review if it underperforms.TIPS:There's an outstanding YouTube video by UberGeeks that walks you step by step on the screen replacement for the A1706. I took my time and replaced the screen in under 2 hours. One thing - this screen comes with every torx and pentalobe bit you will need to get the job done-what a pleasant surprise. I had ordered an IFIXIT kit but the screen came before the kit arrived so I went ahead and replaced it with the tools that were provided. Another thing - people tend to complain about stripping screws with the tools they use and they blame the tools. If the screen has not been replaced before keep in mind that Apple over-torques some of its screws. If the screw doesn't budge with reasonable force, don't just keep turning the screwdriver. For several screws I had to press really - REALLY - hard down on the top of the screw driver with one hand while turning the screw driver very slowly with the other until the screw broke free. If you have ever used an impact screwdriver you will get the idea. I probably should have had a pair of plyers to make turning the screw driver easier but I was able to break all the screws free without it and without stripping them. One screw had me worried because it wouldn't budge and the screw bit spun a few times wearing it a little. But again, pressing really really hard down on the screwdriver and turning it incrementally was what broke it free for me.
Aide R.
2025-05-24 10:54:33
I was hesitant at first but decided to give it a try and I was very pleased with the whole process. The screen replacement is good quality and saved me a lot of money from going in to have it fixed by someone else or just buying a whole new laptop. The only thing I noticed that is different from the original screen is the Apple logo, on this product it’s more of like a black reflective plastic while on the original screen it’s a mirror. To be honest that little part is not even noticeable so it really doesn’t matter. I fixed my screen about a month ago and have no problems. VERY pleased with this product and would recommend anyone to purchase this replacement to fix their screens. JUST BE SURE TO FOLLOW A YOUTUBE VIDEO IF YOU ARE DOING IT YOUR SELF (follow instructions it comes with too)
Michael Schactman
2025-03-25 17:49:28
I have been replacing screens for along time, over 25 years. I have replaced countless MacBook screens as I own a computer repair company. This screen, being less than 6 months old, not only has bright pixels missing all over, and dead pixels, but the glass on the front doesn't even feel like a normal screen. It almost feels like there is no top glass, and only the LCD Digitizer is present. I replaced a screen in my clients computer in April of 2024, and within 5 months it has deteriorated to the point that if it had been like this when I got it, I would've returned it immediately. The missing pixels multiply daily, and as the pictures show, they are in the middle of the screen, and at the bottom of the screen. This screen is the WORST quality screen I have ever seen. I do not recommend this company to anyone. If they can make one screen this bad, who knows how many others are this poorly made. And they say a 3 month warranty, but on their site it is a 180 day warranty. Most consumer electronics come with a standard 1 year warranty. In the EU, the warranty is 3 years. I can clearly see why this company only says they offer a 3 month warranty.....that is how long they know it will last; no more, no less. Buy any other brand for the same price if not cheaper. Stay away from this screen!
DJ Triple9
2025-03-08 15:15:24
Arrived well packed, and all parts in good shape. Looks stock; lower bezel was included to so no extra parts needed. The included instruction weren't bad; I already knew what to do and there are plenty of YouTube videos with directions, so not a big deal. Once assembled I found it to be slightly less bright than the stock one, but not in a significant manner. Only Gripe is it would have been nice if it included screws, as these tiny screws are easily lost, and maybe a bit size map so you know what bit goes to what screw as you work.
Andrew
2025-01-28 09:58:22
The screen arrived quickly. I can’t tell a difference between this screen and the OEM screen. The price is low. Easy to install. Couldn’t have asked for a better product for the price.
LaloRamirez
2025-01-12 12:08:57
So I ordered the screen and three days later it’s at my door. Screen was very well packaged. I installed it and the backlight wasn’t working. So i took the laptop apart and hit up customer service. They were super helpful and sent me another. 3 days later another screen arrived at my door. Put the Mac back together and voila, it’s now working. It was a small inconvenience the first one didn’t work, but the customer service, the price, and the speed in which it was delivered totally made up for it. Will update on its durability in the future.
Jaya Vasoya
2024-12-29 20:02:54
I was scared to buy it in the first place because I never repaired an electronic device like this before. Watched several YouTube videos to understand how to fix it and within 45 minutes I installed this new screen and even cleaned my laptop which was never cleaned before. Also, the camera and screen are pretty close to the original product based on quality. Definitely recommend buying this for a cheaper alternative and about an hour of work to get your Macbook back up and working, instead of going to the Apple store and spending $400-$500plus for the same work.
Babygirl wantee
2024-12-09 15:50:05
Happy
Recommended Products