Your cart is empty.
Your cart is empty.Product Description
About the Double Flaring Kit with Tubing Bender and Pipe Cutter
Get your ride running and back on the road with the ABN Brake Line Double Flaring Tool. Create 45-degree flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
A Closer Look
MAKE DOUBLE OR SINGLE FLARES
Slip prepared tubing through correct size hole in flaring bar, tighten the wing nuts firmly with tubing extending the correct distance through the flaring bar, place yoke assembly over flaring bar and adapter so that swivel head meets depression in the face of the adapter.
Back off swivel head, remove adapter and retighten swivel head so bell shape of tubing is folded in on itself.
BUILT TO LAST
Swivel constructed from chrome-plated alloy steel to reduce friction.
Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
Designed for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” inch steel, aluminum, and copper tubing.
QUICK & PRECISE CUTS
Use the small pipe cutter to cut 1/8-inch to 1-1/8-inch (3-30mm) steel, aluminum, and copper tubing.
Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
EASY STORAGE
Heavy-duty 10.7” x 1.75” x 7.9” inch (27.2cm x 4.4cm x 20cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization
Package includes (1) flaring bar, (1) yoke, (7) double flare dies for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” inch tubing sizes, (1) tube cutter for 1/8” to 1-1/8” inch (3-30mm) steel, aluminum, and copper tubing
Who We Are
Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.
AJ Bates
2025-06-25 14:02:54
Worked great for flaring copper tubing for gas line.
javier
2025-06-23 09:16:55
Tal como se promete
lester dearborn
2025-06-19 18:09:32
My kit came with a blow mold case which secures the tools in place. I am a master mechanic and plumber that restores European Cars. I was surprised at the quality of the cutter at this price point. The flaring tool is precise and easy to use. I would have loved to review the bender but it was either hiding or my kit didn't come with one.....All in All this is a great tool for the price, there are less quality tools everywhere for more money. you won't go wrong with this tool.....
Kindle Customer
2025-06-01 17:06:09
JUNK! I used this tool on both steel and aluminum, the kit also says good on copper. I wouldn’t bet on it. The bar is difficult to tighten- wing nuts should have notches to accommodate bar on yoke to aid tightening. I’ve tried twice on steel, twice on aluminum. The tubing simply slides through the flaring bar- so the first step cannot be completed. Resetting allows flaring but not the double flaring I need. I bought this set because it was made in Taiwan, not China. No better these days. Too late to return even though I only tried it today for the first time. Try a better brand. No reason to chance poor quality when you need results.
daniel randle
2025-04-13 21:59:40
pros:works as advertised and expected easy to use.has instuctions for first time flare or double flare users.cons:3/16 die broke flaring hard steel brake line. bought new die due to time restaints.summary :even though replaced broke die, product still payed for itself, as flared brake lines on two vehicles
joe
2025-04-12 16:11:46
pipe cutter worked well. flare clamps don't hold good enough even after tightening with pliers. if you really compress it in a vise you can get the job done.
Rob G.
2025-01-10 14:47:59
I do a lot of mechanical work on cars, however I never do body work or brake lines, well until I purchased this tool. I only needed one brake line for my Blazer, all I could find were full kits. It's a daily driver, not a restoration yet, I could not stomach the price for a fall set. I decided to try this kit and a roll of brake line. I practiced on a small piece to start, 2 double flares later I was ready to make my line. Followed the directions, created my flares, bent the line to match the original and I installed it. No leaks, works perfectly. I am sold on doing all of my own hard lines in the future. Do not hesitate to use this tool. Follow the directions in the lid and you will be set.
Aurora Unit
2024-12-24 16:19:00
Took a chance on this product despite seeing some negative reviews about the quality of the supplied die studs. I thought that maybe these people did not know how to properly use the tool. But was mistaken.. This tool is basically a slightly improved harbor freight double flaring tool. Except the the die studs snap off after one or two uses. The other components seem to be slightly better made than cheaper alternatives, but you still won't be able to use it because of the die problems. I wouldn't recommend this tool. Was hoping for better quality considering the price point compared to other tools. Spend the money and get a nice set because this tool does not deliver quality for a reasonable price. The cutter is decent. And the clamp seems to be decent quality (Does not wobble or clamp unevenly like cheaper products). At this price point everything should work better considering it costs more than some of the competition (which I purchased). The flares are decent quality if you prep the line correctly. Flaring steel properly with this tool requires absolute perfect prep and a little luck. Definitely would not even attempt stainless with this tool.I'm not a mechanic but I've done several sets of hard lines on many different types of vehicles. I thought that because of that I would be able to get by with not spending the extra money on a professional flaring set. I was mistaken, and the time and headaches you will encounter with these cheap flaring sets is not worth the "savings" even for backyard mechanics or seasoned DIYers. Hope this helps your projects go much smoother than mine did.Taking all of this into consideration I can only give two stars. Because it costs more and operates worse than cheaper sets available. If I didn't have extra dies available this tool would have left me stuck on my project until I could get replacements. If you're exclusively going to be using this tool for copper, it may be a good purchase for you. But for what the product claims to be capable of it does not perform anywhere near what it should for this price.
KC
2024-11-30 17:16:11
Purchased to flare brake fittings, only the dies worked everything else in the kit was unusable.
Wilford Mayo
2024-11-14 14:54:55
Good
Recommended Products
$146.22
$ 57 .99 $57.99