Your cart is empty.
Your cart is empty. Push-on alligator test clip set with red & black extra-large, insulated boots.
Slips onto most test lead tips of .080" diameter.
Package Content:
1x Red alligator
1x Black alligator
Brand:
TestHelper
Brian
2025-08-27 14:56:57
I have an Amprobe DMM, these fit those probes no problem. Very handy to use these. The only thing that I could see improved is to have clear plastic over the connection area (instead it the red and black) so you can see the probes aligning into the receiving sockets. It takes a few time to get the alignment right but I seem to be able to do it now without much trouble. They snap in securely and the alligator jaws in these are strong.
Antique Honda owner.
2025-08-14 17:26:37
Easy slide on to your test leads. For testing dc voltages and continuity. Makes the ground hands free for testing convenience, or attach to black to positive and let your red lead identify the grounds. Must for equipment diagnostics.
Woodydog
2025-08-09 12:47:35
They look like fluke and are good for $6.
Jay
2025-07-08 18:39:54
I ordered these alligator clips because they looked like the only ones that would fit on standard multimeter probes. I'm showing a picture here of one clip on and one clip off so you can see the type of probes I have. The fit one easily and clip into place. Once on they are pretty firm and the alligator clips work great for clamping onto small leads. So far I'm pretty happy with these alligator clips. I'll just leave them on my multimeter leads and then if I need the probes instead of the alligator clips, I can just pull them off.
dlowe
2025-06-29 21:56:12
I finally bought these after fighting with the regular leads for so many years. The clips slide into the leads easily and do come apart easily. They were inexpensive and delivered quickly.
FACTA, NON VERBA.
2025-06-27 14:54:18
I ordered this for my multimeter, unfortunately the black probe got rusty while it was in the box, in a dry place, very quickly. I also noticed the clamps detach from the multimeter probes easily, which aggravates the whole customer experience. the manufactures should take care of this details to boost sales and positive feedbacks.
mo
2025-06-22 19:13:38
I’ve been in the low voltage industry for 26 years…long enough to remember when fluke leads and alligator clips didn’t cost 50$ each! I literally haven’t purchased fluke alligator clips (or leads) since they went up over 25$….that’s ridiculous! Well enter in theses little beauties. I had relegated myself to buying the Chinese test lead/accessory sets for many years now ( which work just fine) but the only alligator clips that are worth anything are thread on and when you are switching back and forth between metering terminals and wire ends constantly you have to come up with creative ways to just use your threaded on clips instead of just being able to pull them off at will. After over 9/10 years of searching, someone has finally made a press on alligator probe tip that is worth some attention. It’s worth noting that I also found some Klein branded clips with a moderate upgrade in quality for about twice the price of these (still almost 1/3 the price of fluke). And don’t get me wrong…I am a fluke Meter guy until I die but I will not be a party to their accessory gouging…just not gonna do it. These clips are WELL worth the price! About to place an order for 2 more sets for the rest of my fluke meters…lol. The off brand magnet meter hanging kits are well worth it too btw…I will never pay 35/40$ for a magnet wrapped in rubber fluke!!
Robin. Rozell
2025-06-20 18:01:32
They seem to work pretty good. No issues and I would probably buy again
Brian
2025-05-29 12:11:19
I have an Amprobe DMM, these fit those probes no problem. Very handy to use these. The only thing that I could see improved is to have clear plastic over the connection area (instead it the red and black) so you can see the probes aligning into the receiving sockets. It takes a few time to get the alignment right but I seem to be able to do it now without much trouble. They snap in securely and the alligator jaws in these are strong.
Antique Honda owner.
2025-05-24 12:56:41
Easy slide on to your test leads. For testing dc voltages and continuity. Makes the ground hands free for testing convenience, or attach to black to positive and let your red lead identify the grounds. Must for equipment diagnostics.
Woodydog
2025-05-21 14:20:00
They look like fluke and are good for $6.
Jay
2025-04-29 17:39:44
I ordered these alligator clips because they looked like the only ones that would fit on standard multimeter probes. I'm showing a picture here of one clip on and one clip off so you can see the type of probes I have. The fit one easily and clip into place. Once on they are pretty firm and the alligator clips work great for clamping onto small leads. So far I'm pretty happy with these alligator clips. I'll just leave them on my multimeter leads and then if I need the probes instead of the alligator clips, I can just pull them off.
dlowe
2025-04-01 18:22:26
I finally bought these after fighting with the regular leads for so many years. The clips slide into the leads easily and do come apart easily. They were inexpensive and delivered quickly.
FACTA, NON VERBA.
2025-03-24 19:28:33
I ordered this for my multimeter, unfortunately the black probe got rusty while it was in the box, in a dry place, very quickly. I also noticed the clamps detach from the multimeter probes easily, which aggravates the whole customer experience. the manufactures should take care of this details to boost sales and positive feedbacks.
mo
2025-03-19 15:45:35
I’ve been in the low voltage industry for 26 years…long enough to remember when fluke leads and alligator clips didn’t cost 50$ each! I literally haven’t purchased fluke alligator clips (or leads) since they went up over 25$….that’s ridiculous! Well enter in theses little beauties. I had relegated myself to buying the Chinese test lead/accessory sets for many years now ( which work just fine) but the only alligator clips that are worth anything are thread on and when you are switching back and forth between metering terminals and wire ends constantly you have to come up with creative ways to just use your threaded on clips instead of just being able to pull them off at will. After over 9/10 years of searching, someone has finally made a press on alligator probe tip that is worth some attention. It’s worth noting that I also found some Klein branded clips with a moderate upgrade in quality for about twice the price of these (still almost 1/3 the price of fluke). And don’t get me wrong…I am a fluke Meter guy until I die but I will not be a party to their accessory gouging…just not gonna do it. These clips are WELL worth the price! About to place an order for 2 more sets for the rest of my fluke meters…lol. The off brand magnet meter hanging kits are well worth it too btw…I will never pay 35/40$ for a magnet wrapped in rubber fluke!!
Robin. Rozell
2025-02-17 12:48:42
They seem to work pretty good. No issues and I would probably buy again
David
2025-02-07 17:34:31
As described
John
2025-01-10 10:21:13
Very pleased with the quality and price. So much cheaper than the 'brand' name products.
David
2025-01-02 15:15:06
As described
John
2024-12-17 15:52:30
Very pleased with the quality and price. So much cheaper than the 'brand' name products.
Recommended Products
