Shopping Cart

Your cart is empty.

Your cart is empty.

Acoustic Audio by Goldwood R191 in Ceiling/in Wall 5 Speaker Set 2 Way Home Theater 1000 Watt New R191-5S

Free shipping on orders over $29.99

$83.88

$ 35 .99 $35.99

In Stock

1.Style:Frameless


About this item

  • FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp
  • FULL RANGE 2-WAY SOUND - 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds, 12mm soft dome tweeters, frequency response is 45Hz-22 kHz with 95dB at 8ohm
  • EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 6.625" with a mounting depth of 3", overall size of 7.625" with raw wire clamp or solder connections, durable ABS housings and grills can be painted to match your decor
  • SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 200 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
  • WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood R191 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations


Acoustic Audio by Goldwood R191 Flush Mount In Ceiling 5 Speaker Set
- Center Channel with Front and Rear, Right and Left home theater configuration
- Wide Sound Dispersion Designed Speakers easily integrate with new and existing audio systems
- Traditional Passive speaker design, simply drive power from your home audio receiver or amp
- Flush Mount low profile housings install easy with unique Pressure Lock Mounting System
- Full Range sound coverage with 2-way woofer and tweeter configuration
- 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds
- 12mm Soft Dome tweeters
- Frequency response is 45Hz-22 kHz with 95dB at 8ohm
- Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed
- Fits round speaker hole size of 6.625" with a mounting depth of 3"
- Overall speaker size of 7.625" with raw wire clamp or solder connections
- Durable ABS Housings and Removable Grills can be painted to match your décor
System Requirements
- Any home audio receiver or amplifier with raw speaker wire outputs
- Your receiver power should be no less than 10 and no more than 200 watts per channel
- CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers
Applications
- Home Theater Surround Sound Systems
- Whole House Audio Systems
- Business or Retail Installations
What's in the box
- 5 Flush Mount Passive Speakers with Removable Grills
- Cut-Out Templates
- Instruction Manual


54mechani
2025-08-24 11:59:51
I used these for surround sound and work perfectly for our use. Great price
Tony Pritchard
2025-08-20 10:55:03
Overall: I was blown away by how well built these speakers were and how easy the installation was! I installed them all over my dental office into removable foam ceiling panels and it was so easy due to the speaker coming with an integrated mounting bracket. Just cut the circle, slip the wire through and the speaker clamps down in a few seconds with the help of a phillips head on a drill.Sound quality: The sound is excellent for this specific purpose (high treble, low bass), but I wouldn't be very likely to install these for a 7.1 surround sound experience due to the lack of range. Again, I knew this buying them and have zero regrets. I keep them playing music (on a pretty low volume) all day and have only been using them for a week now but everyone has been so pleased with the sound quality. We usually crank them up to about 70% at the end of the day and jam out a little and even then, they sound great.Installation: Super simple even without instructions if you're techy. If not, follow the instructions on the mildly confusing paper that comes with it. I would recommend using a better quality wire. I set up one speaker with the included wire and it sounded great but then compared it to my InstallGear 14G premium wire and it wasn't a fair comparison. Just solder the wire to the terminals and wrap the exposed metal in some sort of electrical barrier for safety.Excellent product 10/10 would buy again.Hope this helps!
GSethi
2025-08-12 14:22:28
Fairly easy installation. Took a few hours out of my day to install 14 in my house. They are not a name brand speaker but the audio quality is decent and it looks clean and well put together. The box comes with a template that makes the cutouts more precise and they arrived quickly.
The Chad
2025-08-04 11:40:01
I bought 2 of the 5 packs to setup my 9 speaker surround sound. I have it set up with 5.1.4 (4 overhead speakers for Dolby Atmos) and it sounds great. There is one overhead speaker that sounds different than all the rest, not sure if it's the speaker or if some insulation got inside but I have an extra one to swap out if needed. These sound great and are crystal clear at any volume. Don't expect Bose level performance but these are great for the price. Very clean looking with the frameless ones. They look much better than their other style of speakers. The speaker covers can be easily taken off if needed as they are held on by magnets. The speakers themselves are hidden behind the cover, there is a cloth like material on the metal cover to help hide them more. Comes with a template to cut the hole out of the wall and these slide in and mount in place super easy. They are very secure in the wall. I haven't heard any rattles or anything like that. 2 way speakers are actually the better way to go if you are buying cheaper speakers. Couldn't be happier with my purchase.
Alex Movitz
2025-07-01 13:30:26
These in-ceiling speakers are fantastic. They're very easy to install and come with a good template for cutting in walls or ceilings. I wouldn't recommend the wire that comes with it. It's quite thin.Here's my tips for ceiling mounting:-take one of the templates and find the center. Put a nail through the center. When you have a place where you think you want the speaker, nail up the template. This way you can step back and see if it's in the right spot. Draw around the template with pencil and take the template off.-always check what's behind your drywall when cutting into a ceiling or wall!-use a sharp jab saw to cut out the circular template you've drawn onto the ceiling. Cut just outside the line. The speaker has a lip, so don't be too afraid. Cutting inside the template will make it really difficult to put the speaker into the ceiling.-use a drop cloth or a large garbage bags just under your cutting surface to catch the drywall when cutting.-gently push the screws from the back and the speaker grill will pop out.-test fit the speaker in the hole! It should just fit without forcing, but definitely not super loose. The hole should be completely covered by the lip. Then pull it back out.-while the speaker is out, you can pull your speaker wire through the hole and either add wore harnesses to slip on the speaker's tabs or solder directly. Doing it while outside of the ceiling will make it much easier than crouching in a hot attic. Trust me.-put everything back through the hole and screw it down. You can use a drill, but the screws should be hand tight, not so right it breaks the plastic!Add a powered subwoofer and a nice receiver and you have yourself a very nice speaker system!
J.C
2025-06-19 15:36:02
I'm very pleased with the sound quality from these speakers. I saw some complaints in the reviews but their audio issues are likely from poor soldering joints or loose connections of the supplied crimped wires. I would recommend soldering your own 16awg speaker wire.My only complaint is the terminals on the speakers are on the smaller side so it's a bit tricky getting a mechanical connection with 16awg wire prior to laying down solder. This is a very minor complaint though. Overall VERY pleased with this purchase and would recommend for a budget 5.1 setup. I have this installed in my loft for gaming and movies and is connected to a Sony STRDH590 receiver.
Michael
2025-06-14 18:11:17
Put these in my garage ceiling to have tunes while working out there. For the money they are fantastic. Quality better than expected, they sound great, and powerful enough to get the job done. My only negative is that they are virtually all high range (treble) and little to no bass. In all fairness though I am running them off of a receiver that may be partially to blame for that. I am going to add a powered sub to get some thump into my music but the speakers themselves are pretty darn good for the relatively small cost..
Drx
2025-06-11 12:44:26
I wasn't sure what to expect from these speakers considering the cost. Installed in a suspended ceiling, the provided templates were perfect for an exact fit. I had pre-run my wires so after install they were plug and play. Sound quality is really good. I have a subwoofer but even without it these speakers hold their own. I used a YouTube Dolby surround video to test the 5.1 capabilities and the channels were easily recognizable and sounded good at high volumes. Definitely pleased with this purchase and would recommend this set.
Jocelyn Labine
2025-04-02 16:49:11
Made hight speaker fo my my 5.2.4 dénoncer 3700h the reste of my speaker are clipch perfect match nothig bad to sa thèse super chapeau good
Tom bamford
2025-03-19 16:38:28
For the price these are hard to beat. I use them for ambient music, and they’re perfect.
Siridaran Lingaratnam
2025-02-08 10:05:41
QualityIf higher volume speakers are vibrating