Your cart is empty.
Your cart is empty.Product Description
If you want to stop the scratches and noise caused by the movement of furniture on the floor
If you want to reduce the vibration of electrical appliances during operation
If you are fed up with the fragility of other foam pads
Please choose our high-density neoprene foam pad!
WIDE USE
- non-slip
- Shockproof
- insulation
- sound insulation
- Prevent scratching
Strong Adhesive Backing
Smooth release paper can be peeled off from adhesive backing easily. The stronger adhesive ensures the foam strip can be attached firmly.
Trim Neatly
Each foam plate has the same thickness and size, and can be spliced at will.
Arbitrary Tailoring
You can cut the foam board into arbitrary shapes by yourself, and the irregular shaped items can also be used.
Adam frost
2025-08-25 13:07:05
Good and thick. Works well for my 3d printing vibration minimization setup.
T. Bard
2025-07-20 17:16:48
This is a great cushioned surface to prevent scratches and gouges to susceptible areas. I have used it to cushion the tonneau cover on my pickup so it will not scratch the paint when open. I do suggest the cushion not be used for 24-48 hours after placement so the adhesive has time to fully develop a bond. Pressing the cushion two or three times during the 24-48 hours will help. Once fully bonded, it will not fall off. Due to the thickness and density of the cushion, use a very sharp cutting tool and cut slowly and deliberately for a clean straight edge.
Native Son
2025-05-15 14:28:58
Used these on the inside cover of a vehicle center console to help keep contents from rattling around. So far they are still sticking. Not easy to custom cut but not too bad
N Gee
2025-04-21 10:25:49
Used it against the glass windows to hold security cameras. Durable so far. Thick enough otherwise if thicker than this it would be so hard to cut through. I wanted portable attachments for now so I taped it against the window. I carefully and slowly cut through in the middle. It’s pretty strong which I wanted. Great value for the money!
Brian P.
2025-01-01 15:13:38
Using these as part of shelf padding that a generator is sitting on. There's a bunch of components involved that end up generating lots of vibrations and noise in the RV. These pads cut that down to less than 1/2 of the noise.
Miriam H.
2024-12-24 09:52:07
I didn't put a mic on these but they were definitely thiner than I was expecting. I returned them to get a size up.
Deathdeelr
2024-12-18 17:19:09
Why spend upwards of $50 for a backing pad for your kydex holster when you can order these and just cut them yourself for less than half. I had enough for my three holsters plus the fourth I put on a spot in my car because my knees rub on the side of the console. Good adhesive but does come off in extreme heat.
Customer
2024-11-17 18:51:52
This foam has higher density then the one with the most ratings on amazon by Sal.....
Recommended Products