Your cart is empty.
Your cart is empty.Certain vehicle applications utilize a Fan Pulley Bracket assembly to mount the fan clutch assembly onto the engine. Engineered to exact original equipment specifications, AISIN fan pulley brackets are built with the highest quality materials and robust designs to ensure structural rigidity is maintained and proper support is provided for the fan/fan clutch assembly. AISIN Fan Clutch Brackets are always original equipment matched to ensure ease of installation and exceptional performance. Often overlooked when maintaining a vehicle cooling system, the Fan Pulley Bracket should be replaced when wear is apparent, as the built-in bearing is classified as a wear component, just like other cooling system parts. AISIN is a leader in the development and production of high-quality original equipment matched components and systems for the automotive industry.
M. Duran
2025-08-28 18:38:14
OEM fit, excellent quality, no hassles.
Ty
2025-08-14 10:12:11
Got this fan clutch for a 2003 Toyota 4-Runner with a V8 engine (2UZ). The original fan clutch bracket has over 200k miles and the bearing was slowly going out. It wasn't spinning nice and smooth.But as anyone know Toyota owns a big chunk of Aisin which is a Japanese company. The casting isn't as smooth as the factory fan clutch bracket but everything fits like a glove with no one issues.Finished the timing belt job and everything went in just like the OEM. No issues and all the bolts lined up.Great product and a lot cheaper than the factory bracket.
worldofvolts
2025-08-12 15:15:52
Very High Quality bracket and bearing, fixed my noisy accessory drive issue on 2002 Seqouia.
Duke
2025-08-03 13:22:37
After 24 years & 380k miles the bearing finally went out on the fan bracket in my series 100 Land Cruiser. Not too painful to change, there's plenty of room except when accessing the 4 nuts that hold the fan blade itself in place. Perfect fitment, the bearing spins nicely, and no problems to report after 2 weeks in the vehicle. May this one last for the next 24 years!
Vanessa Taylor
2025-07-11 17:50:30
it works and I saw no difference between the OEM and this part "only an AISIN Logo".
Shanda rossi
2025-07-09 12:48:57
Top quality parts made by Toyota. You can see where Toyota is scratched off.
C. Umberger
2025-07-06 10:30:01
This item came in an aisin box, but when I pulled out the fan pulley bracket, the casting is of poor quality. Rough and jagged seams and face surfacing. The pulley hub had small areas of rust forming. When sat on a perfectly flat surface, the bracket rocked, showing it wasn’t machined perfectly flat. The bearing was a koyo bearing, but that was about the only good part of the whole item. Also to note, there was no aisin stamping anywhere on the bracket. Nothing. It honestly looks like a generic cheap bracket off of eBay, put in a aisin box. I ended up going with OEM Toyota, because due to the install time, I don’t want to be doing the work twice. I can’t say all aisin fan brackets are like this, but at least from this seller, it’s horrible quality. Definitely not what is shown in the listing photo…
CanadaRob
2025-06-19 14:17:42
OEM part. Fit was great.
M. Duran
2025-06-14 12:49:23
OEM fit, excellent quality, no hassles.
Ty
2025-06-11 16:30:09
Got this fan clutch for a 2003 Toyota 4-Runner with a V8 engine (2UZ). The original fan clutch bracket has over 200k miles and the bearing was slowly going out. It wasn't spinning nice and smooth.But as anyone know Toyota owns a big chunk of Aisin which is a Japanese company. The casting isn't as smooth as the factory fan clutch bracket but everything fits like a glove with no one issues.Finished the timing belt job and everything went in just like the OEM. No issues and all the bolts lined up.Great product and a lot cheaper than the factory bracket.
worldofvolts
2025-06-03 16:10:34
Very High Quality bracket and bearing, fixed my noisy accessory drive issue on 2002 Seqouia.
Duke
2025-05-12 14:32:26
After 24 years & 380k miles the bearing finally went out on the fan bracket in my series 100 Land Cruiser. Not too painful to change, there's plenty of room except when accessing the 4 nuts that hold the fan blade itself in place. Perfect fitment, the bearing spins nicely, and no problems to report after 2 weeks in the vehicle. May this one last for the next 24 years!
Vanessa Taylor
2025-05-11 16:46:36
it works and I saw no difference between the OEM and this part "only an AISIN Logo".
Shanda rossi
2025-03-08 15:08:48
Top quality parts made by Toyota. You can see where Toyota is scratched off.
C. Umberger
2025-03-01 18:36:27
This item came in an aisin box, but when I pulled out the fan pulley bracket, the casting is of poor quality. Rough and jagged seams and face surfacing. The pulley hub had small areas of rust forming. When sat on a perfectly flat surface, the bracket rocked, showing it wasn’t machined perfectly flat. The bearing was a koyo bearing, but that was about the only good part of the whole item. Also to note, there was no aisin stamping anywhere on the bracket. Nothing. It honestly looks like a generic cheap bracket off of eBay, put in a aisin box. I ended up going with OEM Toyota, because due to the install time, I don’t want to be doing the work twice. I can’t say all aisin fan brackets are like this, but at least from this seller, it’s horrible quality. Definitely not what is shown in the listing photo…
CanadaRob
2025-02-14 10:27:33
OEM part. Fit was great.
Recommended Products
$16.64
$ 7 .99 $7.99
$28.50
$ 13 .99 $13.99