Your cart is empty.
Your cart is empty.Product Description
Premium 304 Stainless Steel Pipe Support Bracket Clamp
Heavy duty pipe clamp bracket, body made of high-quality 304 stainless steel, waterproof and durable, you don't have to worry about it rust.
Advantage Of AKIHISA Pipe Support Bracket
1. A Variety of Size
- Different Size can be meet different demand.
2. Durable Material
- Made of high quality 304 Stainless Steel, no rusting and durable.
3. Adjustable
- Installation distance is adjustable as per your demand.
4. Easy to Install
- Our pipe bracket clamp very easy to install.
5. Package Include: 2pcs
High Quality Silicone Cushion
Silicone Cushion can be protect your pipe more, avoid pipe scratch.
304 Stainless Steel
Waterproof and no rusting, ultra durable, can be service long time.
Adjustable
Can be adjustable as per your need.
Wide Applications
Our Split Ring Hanger wide application used to industrial，boat/marine, household etc.
John L Scott
2025-09-04 13:31:40
This worked out perfectly for what it was intended. It was a little bigger than expected but will do the job perfectly.
Larry Harriman
2025-08-13 18:34:44
I bought these clamps to put on a cup holder and install on a wheelchair. They worked great and holds very well on the wheelchair.
Javon
2025-07-25 17:50:05
easy to usesturdy constructioncomes with accessories for mounting
Danielle Martin
2025-07-22 21:22:13
Ordered the 3 inch clamps for 3 inch pvc and the provided bolts are not long enough
Gregory V Bratz
2025-07-20 15:28:43
I have one set and they look Awesome with my new solid wood planks and I used them to bolt the clothing rod underneath my planks To hold my clothing on.
Biotech Geek
2025-07-17 11:01:31
I needed to mount a couple PTZ security cameras to round posts. The cameras only came with brackets for flat surfaces. So I used the split ring end of this hanger on the post side and I used a ~3" x ~5" x 3/4" thick high density plastic block in combination with thread rolling screws to attach the three hole circular plate end. On the other side of the block, I attached the camera bracket with the same thread rolling screws. The result is the cleanest looking and most effective camera mounting system I've seen at a decent overall price anywhere. Although, you have to be a little bit mechanically inclined and have a power drill to go this route. You have to drill very small holes in order to get your rolling screw into the plastic block. I would not recommend using any other type of screw. You could also drill through and use nuts, bolts, and washers instead of screws. For the screws, I used a slightly smaller diameter hole than specified for my rolling screw size but it still worked great. I have cameras mounted as high as 17 ft in the air on round pipe posts using this method. It looks very professional as well. It only takes a few minutes to fabricate if you have the right tools.
FJD
2025-07-11 17:47:17
I ordered the 3/4in mounts . They arrived quickly, but parts were missing. There was only one blue insulator, instead of 4, the 2 locking nuts were missing, and there were no mounting screws or anchors.I'm returning for a replacement.Update: The Replacement wall mounts arrived. The inner packing bag was torn open and the same parts were missing in this second attempt to get the correct, entire, wall mount Pipe Support Ring Hanger . This time one insulator was missing, the lock nuts were missing and the wall anchors and mounting screws were missing. I'll give it one more try.Third time was a charm. The package arrived with all the required parts. See photos. This looks like a very sturdy support mount. It should be perfect for my application to hold hot and cold water washer ball valves mounted horizontal to the wall above the washer.
Mark
2025-06-15 10:35:38
Works good, but sizing may be slightly off. Lock nut on the threading into the base helps a lot with stability. It's not the prettiest job, but after replacing my water heater and using flexible connections, the pipes were no longer secure, so these took care of that. One thing to note is that in the pictures you are looking at 3/4" copper pipes and 0.74"(15-19mm) hangars. They would clearly work just fine for 1/2" pipes too, and in my opinion were probably designed for 1/2" pipes, since with a 3/4" pipe the lock nuts on the clamps themselves do not even thread all the way through. This is actually the smallest size available in the type I ordered (the longer type), so I don't think I received the wrong size by mistake. I did not have any missing parts unlike another reviewer, all six lock nuts were included.The end result isn't ideal, but I'm sure it'll hold until the plumbing needs to be replaced entirely. I did not use any of the screws or plugs provided, I pre-drilled my own holes and used more heavy duty torx wood screws. I personally don't trust the smaller hardware (like screws) that come with these kinds of things, and would suggest using your own if you can.
Michael.O.
2025-05-25 16:16:29
Installed to hold a 4†dust collector pipe. Arrived on n time and was well packed for shipping. I would recommend.
Pépin Pierre
2025-03-05 10:44:32
Parfait pour renforcer un robinet bain sur patte
Agat
2025-01-31 11:54:04
It is hard to believe how good it is for such as price.
Kwmck
2024-11-24 15:21:38
I bought this to hang/support 3/4 in copper pipe and the M8 nuts are not long enough to close the clamp around the copper pipe, and are therefore not long enough to make use of the locking nut on either side of the clamp.
Recommended Products