Your cart is empty.
Your cart is empty.Designed to connect clutch master cylinder to hydraulic throw-out bearing or directly to transmissions with internal clutches. Pre-assembled braided steel hose assemblies have #3 lines and are fitted with one -3AN straight end and one 3/16" inverted flare 90 degree hard line end. Also includes one 1/8" male to -3AN fitting (ALL50000).
Mark Usher
2025-08-28 15:17:11
Works great. Seems to be of high quality material. Seems to be closer to an OEM fit and form compared to many lines on here. Time will show the durability but initially I'm pleased.
Ryan Jeffries
2025-08-24 13:43:16
Fittings are direct fits on the RSX clutch slave cylinder to a EM1/EM2 clutch master cylinder. Did the upgrade on my 8th gen Civic Si and its been great for 5000 miles so far (no leaks, no weird fraying, etc.) Keep in mind that you have to ziptie the line down a few times away from the engine or it'll transfer a lot of vibration through the pedal. It may still do it to an extent no matter what but that's not the fault of the brand, it's just what steel line upgrades do.
Kellsie
2025-08-16 11:25:14
Good quality
Terri Parrott
2025-08-05 20:35:47
Doesn't fit the car completely wrong part
Brandon
2025-07-24 12:30:13
This hose is made great but the adapters on the ends DO NOT fit 2005 Honda Civic EX coupes. I had to have 2 made because I could not find any that fit correctly.
Emily Hendrix
2025-07-16 15:36:26
Bought this to replace my clutch line on my 2007 Honda civic Si and it works perfectly. The master cylinder on these cars are kinda tucked away so you need a line that is easy to work with. I bench bled everything before I installed it
Roberta Lee Woody
2025-07-04 18:07:16
Didn’t fit
Customer
2025-05-27 18:52:56
Great price for a stainless line that I had previously over paid for through a miata parts distributor. I just installed it so we will see how long it works for.
David viau
2025-04-24 18:52:01
pour la clutch de mon SI 8 th gen cetait parfait
Linda Blackie
2025-04-23 10:21:40
I used this 36 inch Allstar Performance Hydraulic Line Kit to update the clutch on a 1990 Corvette ZR1.Unfortunately, this Line Kit comes with 1 Male 3AN fitting and 1 Female 3AN fitting, so I purchased a Double Female 3AN Coupler and 2 Male 3AN to 12M x 1.0 adapters to make things work.
Jake
2025-01-18 15:55:29
Good product
Ahmad A.
2025-01-12 10:25:32
Good high quality line, worked great on my EP3. Master cylinder side is a direct fit however for honda slave cylinders you will need an M10x1.0 to 3AN fitting as the fitting provided with the line will thread in but it does not seal due to a difference in the design of the bottom of the fitting (flat instead of flared). The line should come with an assortment of fittings however nonetheless it is still a good product.
Razvan P.
2024-12-18 10:06:51
Works as intended, good quality.
Recommended Products
$84.95
$ 35 .99 $35.99