Your cart is empty.
Your cart is empty. 1 HP, 110V/120V, 11.5A, 60HZ
Valve Action :One Way-Pressure / Release Pressure
Max Hydraulic Pressure:10,000 Psi
Flow Rate(2 Stage):
1st Stage - 1.32 US Gallon/Min (290 Psi)
2nd Stage - 0.185 US Gallon/Min (10,000 Psi)
Hydraulic Fluid Capacity: 0.8 US Gallon
Customer
July 20, 2025
Excellent pressure and volume. Great value for the money. No more foot pump..
Paulie
June 11, 2025
Small portable and industrial grade strong
Timothy Jacobson
April 15, 2025
The media could not be loaded.
Kindle Customer
January 30, 2025
It came fast but had the wrong plug so I took it apart and put a usa style 110 plug on which took a little figuring out but it worked fantastic it's a very small brush motor and after I ran it for a few hours I drained the oil and put in fresh qualityAW 32 oil in it their was some trash in the old oil I figured it would tear up immediately but a year later using on a autobody frame machine and working the crap out of it no issues except the pendent had the contacts misaligned I took it apart and fixed them works fine now the bad the pendent is way to short like 5 feet and it pulls so fast that it is tricky to control on fine work I usually put on a foot box pump for the control reason I would buy again because the speed and power make rough in work fast.
Levi
January 15, 2025
I bought this to hook up to a 70 ton Whitney punch. I was able to punch1 1/8 in hole and a 1-in thick steel plate.As far as the pump lasting I'm unsure, I've only had it for 3 days.
Javier Martinez
January 7, 2025
Deben de mejorar el suiche
scott g.
January 3, 2025
Does not produce the max pressure it says it produces. Motor is not strong
Marino
November 18, 2024
Las conexiones de las mangueras no se adaptan a la máquina. Qué conexión se necesita. Urge!!!
Recommended Products
$279.99
$ 99 .00 $99.00