Your cart is empty.
Your cart is empty.Product Description
Shower Head Regulator, Brass Water Flow Control Device, Matte Black Water Pressure High Flow Control Valve
Specifications
Material: brass
Valve Type: ceramic cartridge
Finish: brushed nickel
Net Weight: 0.17 lb. (75g)
Overall Dimensions: (length x depth x height):
1-5/8" x 15/16" x 1-1/2"(41 x 24 x 38mm)
Size of the Lever: 3/8"(10mm) in length, 13/16"(20mm) in width
Connection Size: both the male and female threads are 1/2" IPS
Apply to: standardized handheld shower, wall mount shower head or bidet sprayer
Package Included: flow control valve 1 PCS
Adjustable Design
Our shower flow valve is designed to adjust the water volume to your liking or completely shut off the water flow.
Effective Water Saver
Functional addition to a high water pressure shower, modulating water flow, hot water lasts longer while getting soaped up.
Smooth Operation
The lever of our flow rate valve features smooth performance, slides smoothly and stays in the position you want.
Premium Construction
Solidly constructed of brass with premium finish for long term durability, resisting daily rust and tarnishing.
No Leaking
Rubber gasket included for a better tight seal, fits well with your fixtures without leaking if install properly.
Easy Installation
Easy to add this valve between shower head and shower arm, wrapping teflon tape on the threads if needed.
William H.
2025-08-25 18:59:18
This is one of those basic products that just works! I installed it without teflon tape & without tools in less than a minute. No leaks & the valve opens & closes flawlessly. I installed it between the showerhead arm & the hose to the showerhead. At first I tried it between the hose & the showerhead but thought having water pressure on the hose might not be a good idea & ended up preferring it at the other end of the hose since the valve added noticeable weight to the shower head in the original configuration too. There are other products offered here but I was suspicious of those valves closing completely or lasting. But this one appears so well made that I doubt it will drip in my lifetime!
JC
2025-07-24 16:08:14
Works perfectly and looks great! My existing shower head was barely providing enough water pressure to effectively rinse soap and shampoo, so I removed the internal water restrictor. I thought the inline filter I installed above would provide sufficient water control. I was wrong! The water pressure felt great for once, but I know showering like this is unnecessarily wasteful.This valve allows me to provide the perfect amount of water pressure without being wasteful. It perfectly matches the color of my existing fixtures (I chose brushed nickel). It was extremely easy to install by hand (with no leaks). I will use a wrench down the road if need. This is a great durable product with a fair price.
Jared
2025-06-29 18:14:11
These have worked perfectly on my shower heads, and are very easy to use to get the exact flow you want. It helps save water and improves comfort. No complaints on quality or durability; I've had a few of these for 2 years no with no problems.
jwolf
2025-06-16 19:18:11
Very good quality. The stainless looks exactly like my shower head so don't even notice it, but most importantly it gives me complete water flow control with the very easy to use slide control. I like to take very hot, long showers to relax my back and neck after a hard day, but worried about wasted water or running out of hot water. This lets me dial it back to just the right flow conserving water and unlimited hot water.
Dino Bravo
2025-06-14 16:15:10
The value is built well and seems solid. I screwed the pieces together using Teflon tape and it just slightly leaks from the on/off slide mechanism, but nothing too bad.
Manoli
2025-05-26 09:01:18
It works well. Looks, and feels, a lot more durable than our shower sprayer.
Book Addiction
2025-05-16 15:10:37
This was extremely easy to install between our handheld shower head and the hose. With good thread seal tape it doesn’t leak at all. It easily sits above the mount. It can be adjusted one handed, very smoothly. If you adjust it too quickly the water will judder, and if you restrict the flow too much there is a higher pitched sound. Neither are really issues, but some folks seemed to be confused as to the cause - physics is to blame, not the flow valve itself.We attached it to a 2.7gpm shower head, and the warm water lasts much longer now without really feeling like the flow is restricted. 3 people can shower in a row now.. I like that it can be shut off completely, great for bathing the dog without wrangling a wild shower head or fussing with the knobs.
Karl S. Aromaa
2025-04-13 10:40:46
This valve works smoothly with my Moen Attract shower head. It's nice to be able to control the flow and save on hot water use. The valve blends in seamlessly with the Moen fixture. You would never guess it was an add-on.
Le
2025-04-08 10:06:46
Good quality
ABUIBRAHIM
2025-04-05 18:49:43
nice solution
Z3PHIR
2025-03-20 16:10:37
So far, so good! It works great and it was easy to install (only took less than 5 minutes). With it wide open, we don't lose any water pressure and it hasn't leaked at all when it's closed. It's definitely worth the price and it feels well made.
Taylor
2025-03-17 11:31:02
A previous plumber installed a shower valve and installed PEX for the tub spout which caused it to stack and force the water out of both the tub spout and shower head at the same time.They were looking for a solution that would alleviate their issue without damaging their new shower.This worked. Not ideal. But it solved their issue and has worked flawlessly since.
Javizzle
2025-01-31 10:18:23
bought to attach to shower head and helps control the flow. was meant to attach to handheld but was cutting the plastic, so relocated to resolve
Recommended Products