Your cart is empty.
Your cart is empty.Product Description
Key Features
High-Steel Material
This Linear bearing rail is constructed with carbon steel main axle, GCr15 bearing steel linear rail block and aluminum alloy casing. Corrosion-resistant, high strength, and wear resistance.
Complete Sliding Unit
Professional and technical rail and block, stabilizing the original rail. Move smoothly without deflection, minimal wear and low noise while using.
High Hardness & Rigidity
Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, with high accuracy and strong durability.
HGR15 Linear Guide Rail Kit
This CNC linear guideway rail is of 2 pieces of HGR15 rail shafts, 4 pieces HGH15CA blocks, High-quality steel material extends the service life of the shaft, and the machine. Move smoothly without deflection, minimal wear and low noise.Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, line cutting machine, precise measurement instrument, woodworking machinery, handling machine, and the shipping device.etc.
Specifications & Package Contents
- Type: HGR15 Slide Rail
- Material: Gcr15 steel
- Static Load Ratings: 16.97 KN
- Fixing Screw Hole Size: M4x16mm
- Performance: Smooth motion, Low noise
- Package includes: 2 X HGR15-Linear Slide Guide Fully-supported Rails
- 4 X Bearing Blocks
bernard
2025-08-23 11:03:14
i used the rails for a CNC machine. perfect for my application
Rhys Doud
2025-08-17 13:33:19
These things are bigger than I anticipated, but in a good way. They have really nice rigidity and yet still took smoothly for any sort of motion application. I’m personally installing them on a mini cnc plasma table
MRJT
2025-08-12 15:05:15
I have yet to put this to use. My first impression is one of precision and quality at a great price.
Joe Ford
2025-08-04 19:30:54
The HGR guide rail kit arrived early, it was carefully and securely packed, and the parts were fine. I dinged this otherwise terrific product a star because it contained 16 M5x.8x16mm mounting screws, and there are 18 mounting holes. I made a trip to the local hardware store and bought the needed screws. That's what I didn't like about the sale.What I did like was the following:1. The guide rails themselves are carefully ground to final size, they're lubricated, and the edges are smooth; no cut fingers in working with this product.2. The carriage blocks are smooth, clean, lubricated, and their bearings support the blocks as they glide, and I mean glide, quietly along the guide rails. It's all very smooth. No side-to-side wobble.3. The dimensions, mounting holes, and counterbores are all very close in size. I miked the mounting width of the two pieces of 500 mm guide rails at several steps, and all points were within .002 mm. I set a caliper at the outside edges of a pair of mounting holes, locked the transit, and then moved the caliper to the other hole pairs. Snug fit everywhere. Just right.4. The cost for 2 pieces of complex shaped steel guide rails 500 mm long and four carriage blocks, delivered to me, ahead of schedule, was $50.02, plus local tax. It's a bargain.5. One more item: The carriage blocks all have serial/build date numbers within a few dozens of each other. They're identical in appearance.Tip: Have a small magnet available when you mount the guide rails. The screw heads and counterbores are a snug fit, and removing the screws without a magnet is not easy.
Mike H.
2025-07-25 16:11:07
I purchased these slides to build a surface grinder attachment for my 2x72 grinder. These are some quality slides and a very fair price.
Diamondd7711
2025-06-23 11:43:54
Everything was packaged well, no damage in shipping. The bearings run smooth, no issues so far.
Tracy
2025-06-16 13:38:31
I am building a new CNC machine, and I was hoping that the trucks that are on these linear rails would run smoothly but they do not. They feel real gritty as if they were not cleaned not greased or all of the above. I should not have to remove these bearings to resolve an issue that should not exist in the first place. These linear rails could be better a lot better. If there was any kind of quality inspection performed on these parts the price should be lowered. You shouldn’t have to pay full price for something you have to fix.
Jean Gonzalez
2025-05-23 10:22:27
The rails arrived in working condition with protective oils.
Hydro1
2025-04-15 13:28:00
I was hesitant purchasing as wondering about the quality. Once installed on my drum sander, heavy motor one side and heavy drum on the other the motion was seemless and super smooth and the most important ,zero play. No twist,no side to side movement at all checking with multiple dial indicators. My only negative point would be you have to be extremely careful removing the truck from the rail and also installing the truck on the rail as the ball bearings are very easily popped out but once installed they are great. Just use the plastic pieces that come with them and its perfect.
enrique camarillo garcia
2025-04-10 21:19:18
Muy buena calidad. El movimiento es fino
Chris S
2025-03-12 17:40:05
Bought 4 of these rails which comes with 8 bearing blocks, however 7 of the 8 were the same except 1. The threads were also tight on that one.
john
2025-02-06 16:49:53
Look better in hand than advertisement photo and heavy for such a small package wish the supplier had more sizes like 20mm rail 1500mm long in sets of 2 or 3 pairs for better pricing. Better prices make more sence for home biulders like me. Good deal if they stay tight and only time and use will tell that. Thanks
Recommended Products