Your cart is empty.
Your cart is empty.Product Description
Precautions:
- Storage method:
- Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
- It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
- Usage:
- Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- Prohibit the use of resin in places where there is a lot of sunlight.
- Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
- Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
- Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
- Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
To ensure successful and perfect printing, please check with user guide in the link for further details.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
ANYCUBIC Standard UV-Curing Resin
General resin, a top-choice for entry-level users
ANYCUBIC Standard Resin delivers balanced performance in terms of printing success rate, stickiness with print bed, model details, printing precision, hardness, resilience, smell, fluidity and ease in cleaning. This helps users quickly enter the world of resin 3D printing.
Including popular colors in the market, pure molding colors, and good late-stage coloring effect.
- Density: 1.13g/cm³
- Viscosity: 250-300mPa·s
- Molding Shrinkage: 4.5-5.5%
- Surface Hardness: 82-85D
- Flexural Strength: 45-70MPa
- Tensile Strength: 36-50MPa
- Flexural Modulus: 1000-1400MPa
High Precision
Low shrinkage, dimensional stability when printing. The model has high precision and clear details.
Quick Curing
ANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time.
Wide application
ANYCUBIC UV Resin has a wide application: Jewelry, dental, architectural model, miniature and so on.
Greg P
2025-08-27 11:09:56
Anycubic has been my goto resin since I started printing and it has yet to disappoint. It is the most fluid resin I have used and makes very sharp prints on my Saturn 8K. A couple of key points:1- I have had to bump up my times to 4-5 seconds per layer, which is twice as long as others say it should be, but I get really solid prints, so it's worth the extra time, I think.2- I'm not finding the harsh resin smell people say there is with standard resin. Because resin is hazardous, I do ventilate, but when I do have direct exposure to the resin smell, the Anycubic resin just isn't as bad as I was expecting.3- I have my base level time all the way down to 10 seconds and it still sticks a little too well. It takes some serious scraping to get my prints removed. But that's better than my prints falling off in the middle of a print.
TF
2025-08-15 18:30:18
Pretty much only use the grey standard resin at this point because it just works everytime. Price is right, quality is comparable to anything else in the same class, and best of all it prints more consistently than any other resin I’ve tried personally. I’ve probably used 15 kilos with hardly a mishap.
SFXPHIL
2025-07-10 18:23:26
Very pleasantly surprised at the quality and performance of this std grey resin. Stuck well to the build plate, detail was not as sharp as Siraya Tech Fast ABS-Like resin but it was also not as brittle. supports came off very easily leaving only a small mark on the printed part. Overall I'm pleased with the results..
Rondomondo99
2025-05-21 17:22:41
Very good stuff, moderately priced can generally get it on sale
Nixon A
2025-05-15 10:28:46
excelente
johany
2025-05-10 12:29:24
Todo salio perfecto llego en corto tiempo y muy bien empacado , comprare mas
Cory
2025-05-06 14:16:04
The quality of the print is pretty good. But this resin stinks bad! I bought 2 bottles, on a budget. Got mixed results and a lot of failed prints. But once I changed the settings, it worked a lot better. But had to throw my whole printer outside to print. The odor is so strong from this resin it makes ya sick. I'd put it in my bathroom and print with the door closed and it'd still stink up the whole house. So outside it went.I picked up elegoo resin after, a lot better to print with indoors. But I think this resin picks up details more. It pops and the lines look cleaner. But, I'll go with the other resin for now cause this I can't use anymore and I don't want to ruin my brand new resin printer during winter.
Gabe
2025-03-03 10:36:02
I've been using this resin for about a year now and it's been good to me. No issues with failures (besides not adding enough resin..) and the print quality came out good. I also paint miniatures and models and found this resin to be a little more brittle, but it isn't ABS like so that is to be expected. I do think this a great starter resin and fine if you're not needing to print very thin pieces that you're going to handle often.
Cliente
2025-02-05 11:46:59
No me gustó que podemos hacer?
Recommended Products