Your cart is empty.
Your cart is empty.Product Description
-
Find 3D Models on PIXUP
Check out pre-supported models or look for 'Newbie Friendly' & 'Phrozen Verified' tags for success!
-
Get Printing Parameters
All the recommend parameters are provided. Refer to resin profile spreadsheet on Phrozen website.
Melanie B. Anota
2025-08-20 13:24:12
Great for printing 3D models.
Sam Cain
2025-08-17 12:33:51
good product
TeeJ
2025-08-05 17:14:37
This resin prints extremely well. I kept slowly increasing the print speed, and the results stayed the same until I ran out of resin. I like the color as well, a darkey grey than the usual resin which I found very appealing. The prints seemed to be as strong as most other resins I've used in the past. This was my 1st test washing my prints in detergent rather than IPA, and it worked just fine. Between this resin and the lack of IPA, there was almost no odor in the printing process at all!
Daniel Kulinski
2025-07-12 18:28:27
I use this in my Saturn 3 Ultra on the high speed resin setting. It prints very well and quickly. After washing and curing the impact strength wasn't great, a fall from a folding table managed to break parts off of a model I had printed. The parts were thin and protruding.I do like this resin for the quick printing, just handle the finished products carefully.
PandaReviews
2025-06-29 16:55:06
This is a great resin. I haven't had any issues with it and all of my prints are coming out great with 4K details. I also like the flesh color, it makes printing figures a little easier on the painting step. I also find that true to the title it is a lower order than other resins I've used.
Joe
2025-05-17 09:45:10
I always start new resin at 2.2s layer exposure and reduce my lift/retraction speeds by half. If I have failures at those settings then its typically resin related.With this resin being 'rapid' I left my settings at 1.8s and no issues with any test prints so far.
Joe Marino
2025-05-13 15:40:00
This resin delivers incredibly sharp and precise prints, making it a great choice for projects that require fine detail. It’s easy to work with, and the finished prints look professional straight out of the curing process.The downside is that the material is a bit brittle, so it’s not ideal for parts that need to withstand a lot of stress. For detailed models and decorative pieces, though, it’s a reliable and high-quality resin.
Troy
2025-02-14 13:02:48
This resin printed very easily and nicely on my first gen Elegoo Mars. I didn't need to adjust any settings from a standard abs-like elegoo resin. Post processing was as easy as any other resin as well.I can easily recommend this resin.
Recommended Products