Your cart is empty.
Your cart is empty.Product Description
Usage Notes:
Shake the resin well before use.
Unscrew the cap and add it to the resin tank according to requirements, and select the right settings when using.
After printing, use supporting tools for post-processing, including spatula, diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning liquid.
*It is not recommended to pour the cleaning waste liquid directly into the sewer. It is recommended that the residual resin be treated by light curing after outdoor evaporation or heating to evaporate the water.
Precautions:
1.Keep sealed and away from light at room temperature. Avoid heat or sunlight.
2.Recommended temperature: 18-35℃. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60℃) before use.
3.In case of settlement of resin pigment, please stirring or shaking well before use.
4.In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled.Therefore, it is suggested that:
(1)The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);
(2)The duration of sun exposure (summer) should be controlled at about 1 hour;
(3)Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;
(4)It is recommended to print in a dark room, or cover when printing.
To ensure successful and perfect printing, please check with user guide in the link for further details.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
ANYCUBIC Water Washable 3D Printer Resin
No Need for Alcohol, Easy to Clean
Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use.
It supports 3 ways of washing, such as water washing with Wash & Cure machine, wash in the container, ultrasonic washing. There's always one way that suits you.
- Wavelength: 365-405nm
- Density: 1.15-1.20g/cm³
- Viscosity: 200-300mPa·s
- Surface hardness: 80-85D
- Tensile strength: 40-50MPa
- Elongation at break: 8-18%
- Molding shrinkage: 4.2-5.5%
Multiple Choices, No Limitation
ANYCUBIC Water Washable Resin supports 3 ways of washing: ANYCUBIC Wash & Cure Machine, Water Washing in containers or Ultrasonic Washing. There's one way that suits you.
Low Odor and Safe
ANYCUBIC Water Washable Photopolymer Resin has a low odor and it can ensure customers with a better printing experience
Long Shelf Life
ANYCUBIC upgraded water washable resin has a longer the shelf life to 1 and a half years, to help the resin to store longer and safe use. The data comes from Anycubic Product Lab.
Jenn Peltier
2025-09-07 21:32:43
I do miniatures, and love the water wash resin. Works well for my needs.
Pablo Bonilla M.
2025-08-16 10:08:58
Easy to wash, the smell is not so strong, the finish is very good
The Old Man
2025-06-19 16:25:25
This resin worked great and has great detail and accuracy. Easy to clean with just water.
David M
2025-06-10 12:48:34
One of the best water-washable resins I've used.Settings that I used on my Creality LD-002HExposure Time: 1.9 secondsBottom Exposure Time: 12 secondsBottom Layer Count: 8Layer Height: 0.050mm
AL
2025-05-06 14:54:16
I love this resin, it was super easy to use and dial in settings on my anycubic photon m5s. I recently tried the siraya tech simple resin, and that was much worse all around in comparison.This resin smells better (not as bad) as typical printing resins, and washing is a breeze. I love that I don't have to compromise between water-washable and abs-like. I wish it came in a bigger bottle!
MDouzaArt
2025-04-26 16:43:22
Easy to dial the parameters with this awesome resin, easy to clean, low odor, and nice details in 8k resolution.
Geek House Creations
2025-04-12 13:13:54
Great resin with much easier cleanup with water. The only caveat is that it’s a bit more brittle than the regular one, so be aware depending what you’re printing.
Thomas Visintainer
2025-04-01 13:39:51
When I started printing, I used standard resin, but after using this, I preferred it. Using water instead of harsh chemicals for cleanup has been nicer and cheaper. I have not seen any quality differences between standard and water wash either.
Victor
2025-03-21 14:54:49
La recomiendo.
Omegadiek
2025-02-14 21:39:28
Cuesta mas trabajo limpiar el fep y la placa de impresión. Perl la calidad de impresión es excelente. La combino con resina dura de anycubic
Keldor B.
2025-02-13 13:08:19
Das wasserwaschbare Harz von ANYCUBIC ist eine solide Wahl für alle, die im 3D-Druck tätig sind und eine praktische Lösung für die Nachbearbeitung suchen. Die Möglichkeit, überschüssiges Harz einfach mit Wasser abzuwaschen, erleichtert den Reinigungsprozess erheblich und ist ein klares Plus gegenüber herkömmlichen, lösungsmittelbasierten Harzen. Dieser Aspekt des Produkts entspricht den Erwartungen gut und stellt eine weniger chaotische und geruchsarme Alternative dar.Die Drucke selbst überzeugen mit ihrer Detailtreue. Feine Linien und komplexe Strukturen werden präzise wiedergegeben, was das Harz für eine Vielzahl von Anwendungen, von künstlerischen Projekten bis hin zu technischen Prototypen, geeignet macht. Die Festigkeit der fertigen Objekte ist zufriedenstellend, obwohl man, wie bei allen Harzen, sorgfältig mit den ausgehärteten Modellen umgehen sollte, um Langlebigkeit zu gewährleisten.Insgesamt bietet das wasserwaschbare Harz von ANYCUBIC eine gute Performance. Es steht für eine unkomplizierte Handhabung und ermöglicht es, ohne den Einsatz von Alkohol oder anderen Chemikalien zu reinigen. Für diejenigen, die Wert auf eine saubere und einfache Nachbearbeitung legen und gleichzeitig präzise Druckergebnisse erwarten, ist dieses Produkt eine überlegenswerte Option.
vallaud
2025-01-03 17:43:57
c'est une résine incontournable. Attention cassante sur des éléments très petit. Mis à part cela rien à dire parfait pour moi
Jesus D.
2025-01-02 10:01:23
El producto es muy bueno. Las impresiones salen con una definición muy alta. Poder hacer la limpieza con agua es genial. El único problema es que al curar como todas las resinas estándar son nada flexibles y quiebran fácilmente. Para piezas macizas la recomiendo pero no para finas o detalles de poco volumen.
Recommended Products