Your cart is empty.
Your cart is empty.
Super high precision tool
Our vernier Ball/Tube Micrometer is used for measuring thickness of pipes and tubes.
Great tool for gunsmiths and reloaders wanting to measure the thickness of their brass quickly and precisely.
Features:
- Clear graduations on satin chrome finish
- Carbide spindle tip
- Ratchet Stop
- Measure case neck thickness and uniformity
- Accuracy: 0.0001" Range: 0-1"
Greg
2025-09-02 12:26:53
I use this for reloading to measure case wall thickness. Good quality at a value price.
George
2025-07-03 18:53:15
This is exactly what I expected, and it works great.I got this to measure case neck thickness on brass rifle cases, and it works great for that purpose, and is accurate enough for the tolerances I'm working with. I check it against a couple of standards periodically, and once set, it hasn't needed adjustment.The dial spins with a bit of stiff resistance, but it's not bad and doesn't deter from its usability.You can buy pretty much the same quality of tool branded by one of the major reloading suppliers, and pay 50% more for the same quality and accuracy.It's a cheap Chinese-made tool, so my expectations were pretty low; I'm not expecting Mitutoyo or Starrett quality and feel. Considering it is accurate and repeatable, and considering the cost, this is a fantastic value.
Kindle Customer
2025-06-25 20:29:26
I went with this economical model of Tube Micrometer as it is a very seldom needed tool for me. I find this to be a fine tool for the price point and is accurate to the limit of my ability to test it. I believe it is a tool that will last and stay accurate as long as it is given the proper care and feeding like any fine shop instrument. Well now that I have one I have found uses for it that I did not know I had. When it is convenient to measure an odd shape like a tube or other irregular non-flat part you find yourself measuring stuff just because you can, and there is no such thing as too much knowledge about the dimensions of the parts you are working on, better to know the size and not need the information than not know at all. You run into tube stock that the hole is not exactly in the center and this is a great tool to determine the consistency of the wall thickness thus knowing the egocentricity of the bore to the exterior. I can highly recommend this micrometer for it's intended use and for others you may dream up. If like me you have a home hobby shop and you are not doing Rocket Surgery or the like and just need to find the size of the occasional item and don't want to spend a fortune for the measuring equipment this should do the trick for you, it is doing it for me.
routerhead99
2025-05-12 19:15:51
Product arrived on time. Decent quality. give good and consistent reading after calibrating. Ratchet stop knob works adequately. construction is solid for the price. Readings take practice and getting used to. Included instruction on use, were good enough to help figure it out. At test rod to check measurement and calibration would have been nice.
R G
2025-03-17 09:17:33
Good deal
Dale Boatman
2025-03-07 10:28:27
Lack of instruction. This is the first tube micrometer I purchased. I didn't realize you should use the small nob for accurate measument.
Lizard King
2025-02-26 16:56:15
Better than I expected for the price. All I wanted was something to measure brass case necks and this does the job just fine. Better quality than I thought it would be. Functions and gauge lock feel very solid. In most cases I just need to set it and forget it. So long as I'm under 0.12 on my 300blk necks, that's what I need. This locks up tight and holds in my mini vice for quick brass checks. I use for 308 match as well. Will sufice if that's your intention and don't want to spend twice the cost for a better instrument. Glad I took the chance.
Ralph L.
2025-02-24 15:14:29
This is a great micrometer for checking the thickness of rifle brass when neck turning is to assure you maintain safe thicknesses.
federico cacho
2025-01-06 18:06:40
excelente herramienta y a super buen precio ya que otra similares pagas hasta 3 veces mas le valor de esta
T
2024-12-23 14:31:28
Works as required
Fil
2024-12-05 13:34:18
Easy to use
James Dunbar
2024-11-17 10:09:32
All ok ! measuring brass tubing wall thickness .
Jayson
2024-11-16 11:36:32
Was not initially impressed. Couldn’t get consistent readings, ratchet was very tight and would bend the frame.Took it apart, cleaned and lubed everything, now it works flawlessly. Exactly consistent to the 0.0001†every time. Also had to zero it using another gage block as it doesn’t come with one.I use this for measuring bearing shells for engines.
Recommended Products
