Your cart is empty.
Your cart is empty.Paschal W.
2025-08-31 18:37:33
I’ve been using these push buttons switches for a while now. What I like about them is that they are water proof and come in different sizes and colors. This little 12mm switch works awesome and also is bright enough to where when it’s on it’s not distracting. This switch I’m using on my BadBoy mower to turn on some bright AuxBeam lights. The pre wired end with directions makes it very easy to install.I highly recommend them and will buy more when needed.
Kevin
2025-08-24 12:41:37
I had initially installed a toggle switch to shutoff power to my Humminbird Mega Live on my boat, but my leg kept hitting it and turning it off while in use....I didn't even know these existed. Flush mount is exactly what I needed. 12mm fit my toggle switch hole, green led will remind me that the unit is still on and to turn it off as the ML drains power even when the graph is off. Waterproof was also necessary for my boat, which this is. Good purchase. Comes with a set of 3, so I will probably use one on my ice fishing setup for the mega live.
Clint
2025-08-17 10:35:30
Works great to turn on relays in the racecar. Easy to see the light in direct sunlight, up to ~45° viewing angle. The pre-soldered wires make connections super easy, no fussing with tiny terminals.
Bill
2025-08-11 17:07:07
Well made. Included a wiring diagram. Button is not lit.
Fred Sanchez
2025-05-20 17:57:52
Buttons are about the size of a pencil eraser but wiring is a breeze. Instructions are great. Great product!
Gary C. Grifin
2025-04-22 19:59:44
I think the Only thing that would make these better is if the had Plugs on the back of the Switch lugs instead of being wired direct to the Switch. I usually buy a different Brand because I like the Idea of being able to just Unplug it if it needs replace. With this Brand You would have to Cut all the Wire & Re-solder them to replace the Switch. It would only cost a Few Cent's to add a Plug & make it easy to replace them when needed. Because of that I don't think I will buy this Brand again I have had to replace some of My Switches over the Years & Plugs make it so simple. on a Scale from 1-10 I would give these a because of it not having a Plug on the Switch. I will say they are made with Quality Material just not a Lot of Thought went into replacement later.
Hardball
2025-04-13 17:13:00
These switches are indeed VERY small. I took that at face value and got them anyway, but they are rated at 2 Amps.One of several things I’d say about the 2 Amp rating is that this must be a PEAK, momentary rating. The wire that is attached to these switches is barely five strand 22 gauge, which is rated in the milliamps for continuous current.I’m going to discard these and consider it $20 wasted until I can find a project that doesn’t pull over an amp continuous. My current project is not for these switches. I had planned on using these to switch on and off a Raspberry pi project that will pull around 1.8 amps continuous after all is accounted for. No bueno on the thin wires.They are, however, as described otherwise, except they latch rather wonky. They feel gritty, and maybe it’s because of their tiny mechanism and burrs. This might go away after use, but I won’t know for the interim.Three stars for a mostly accurate description, two deducted for a questionable current rating and the gritty mechanism.
heather
2025-02-06 15:12:00
Works perfect for my application. Which was adding a cut-off switch to my classic vehicle.
Trevor Blood
2024-12-09 17:54:10
Quick service
Customer
2024-11-15 18:02:01
El artÃculo llego rápido y fue muy fácil de instalar.Viene con un diagrama eléctrico para ser más entendible la conexiónEl LED se ve muy bien ya instalado.La calidad de los materiales es buena.
Recommended Products