Your cart is empty.
Your cart is empty.Product Description
kylejhill
2025-08-28 11:38:16
Functions great and looks even better. I used this as a button on my motorcycle to open the gate at the end of the driveway. It even lights up at night so I can easily see it. I’m very happy with this purchase.
Wolfenhawke
2025-08-27 17:31:05
This switch works perfectly for a project to create a garage door switch with an indicator that the door was open. The switch and LED are independent.Some documentation things to note. The LED is rated for 12V AC/DC on the package. The instructions note DC. 12V is bright so I run it with 6.5VDC. The instructions have various wiring options but all have the switch wired in with the LED. Regardless, the LED and switch are independent. The LED does have a built in resistor (that’s why the 12v rating).Light looks good when lit. Switch is smooth momentary contact. Noiseless or almost noiseless. There’s a connector that comes with and plugs into the switch that makes wiring convenient and, I suppose, eases future wall plate removal (like to service the other switches in my application). Good quality.
R. W. Parks
2025-08-23 11:11:14
I just got this, so cannot say anything about how long it will last. Also, I ordered this one with the main criteria of it getting delivered the next day. But I was pleasantly surprised at how nice it is. It looks well made, with a nice finish on all the exposed parts. The button is flush with the housing normally, you need to use a fingertip to push it well inside before it actuates. Very minimal chance of doing it by accident. The force needed is pretty light, so its not an issue to keep the button pressed for a while. (I will need to hold it down for about a minute in my use, but I HAD to have a momentary switch so there is no way to turn it on and get distracted). There is a nice tactile click when the switch activates.The light ring is pretty nice. I am only running it on 8V, so its not as bright as it would be at the rated 12V. I have not yet tried it outside. It may not be that visible in bright sunlight. However, I do not really care for the way I will be using it.Summary, I really like this. Nicer than I was expecting. Price is reasonable too.
Ferny
2025-08-13 14:04:06
Below I will leave my initial 1 star review, the company reached out to me and asked how they could make things right I said send me a new switch. They sent me a new one free of charge and without question. I have installed the new switch same way as the first. Perhaps I just got a bad egg, time will tell....if this second switch fails in the same way I will change my review back. If it stays 4 stars well the switch still has not failed.I purchased this switch this past July to use as a horn button in my car. Installing it was easy and worked well the 3-5 times I used it over the next few months. I then re-build my engine so the car was sitting in my garage from October to January, out of the weather battery disconnected not being used. Just now I got around to fixing the horn as it stopped functioning, figured the problem lied elsewhere but no, touching one wire to the switch to ground horn sounds. Take my multimeter leads and started probing the switch itself, OL on all configurations. I can see the switch moving and thing still looks brand new but the contacts don't close to complete the circuit.
Russell E Ireland
2025-08-03 10:28:29
Easy install, takes the place of any contact switch, on when you press it, off when you release it.
Robert
2025-07-28 16:11:26
Good quality. Only a 2A though. Did not work for what I needed, but that was my fault for not reading.
Willy
2025-07-23 15:24:14
Working on my son's old 1960's Mercedes. Doing a gas to diesel engine and fuel system swap. The diesel engine injector pump fuel shut off valve operates with vacuum. We used this switch to activate a vacuum valve to send vacuum to the fuel shut off valve on the injector pump. The price was great. Shipping was fast. The switch is heavy duty. The switch is also led lit and we wired it so that it is lit up when the car is running. We ordered the red led lit switch to indicate that that is the switch to shut off the engine.
boise
2025-07-22 15:46:07
Bought to replace a remote battery switch on the boat. As spec’s and went in easily….and worked as expected
Ken Williams
2025-07-05 12:34:57
Solid functioning switch. Fits well with the other switches on my dashboard. Easy install. Wired to open/close exhaust cutouts on my street rod.
bargain-bliss
2025-06-25 12:15:04
It is well-designed with good quality. It is pricy for its class.The light inside might not be an LED, by reversing the applied power it still lights up (LED is polarity dependant). In some cases, it matters whether it is an LED or a bulb.UPDATES: It is an LED. Two LEDs in reverse/parallel directions so it turns on with any polarity (apparently with both DC & AC). As an electronic technologist, I rely on datasheets. If you are familiar with basic electronics, I would suggest putting a resistor (experiment with 150 to 330 ohms/ 1/2 watt) in series with the LED. direct 12v voltage put stress on LED (any LED) and might shorten its life, I haven't used it long enough to talk with certainty.I like it and recommend it as a good quality product.
Wade Robertson
2025-06-21 14:25:36
Used for a line lock button
Mephiskapheles6
2025-05-12 17:06:55
good
Zeph Williams
2025-05-09 18:22:15
The switches were perfect for adding a garage door opener remote system in my car. Very pleased with them.
kylejhill
2025-05-02 12:29:10
Functions great and looks even better. I used this as a button on my motorcycle to open the gate at the end of the driveway. It even lights up at night so I can easily see it. I’m very happy with this purchase.
Wolfenhawke
2025-04-22 13:37:31
This switch works perfectly for a project to create a garage door switch with an indicator that the door was open. The switch and LED are independent.Some documentation things to note. The LED is rated for 12V AC/DC on the package. The instructions note DC. 12V is bright so I run it with 6.5VDC. The instructions have various wiring options but all have the switch wired in with the LED. Regardless, the LED and switch are independent. The LED does have a built in resistor (that’s why the 12v rating).Light looks good when lit. Switch is smooth momentary contact. Noiseless or almost noiseless. There’s a connector that comes with and plugs into the switch that makes wiring convenient and, I suppose, eases future wall plate removal (like to service the other switches in my application). Good quality.
R. W. Parks
2025-04-19 12:10:36
I just got this, so cannot say anything about how long it will last. Also, I ordered this one with the main criteria of it getting delivered the next day. But I was pleasantly surprised at how nice it is. It looks well made, with a nice finish on all the exposed parts. The button is flush with the housing normally, you need to use a fingertip to push it well inside before it actuates. Very minimal chance of doing it by accident. The force needed is pretty light, so its not an issue to keep the button pressed for a while. (I will need to hold it down for about a minute in my use, but I HAD to have a momentary switch so there is no way to turn it on and get distracted). There is a nice tactile click when the switch activates.The light ring is pretty nice. I am only running it on 8V, so its not as bright as it would be at the rated 12V. I have not yet tried it outside. It may not be that visible in bright sunlight. However, I do not really care for the way I will be using it.Summary, I really like this. Nicer than I was expecting. Price is reasonable too.
Ferny
2025-03-28 11:25:57
Below I will leave my initial 1 star review, the company reached out to me and asked how they could make things right I said send me a new switch. They sent me a new one free of charge and without question. I have installed the new switch same way as the first. Perhaps I just got a bad egg, time will tell....if this second switch fails in the same way I will change my review back. If it stays 4 stars well the switch still has not failed.I purchased this switch this past July to use as a horn button in my car. Installing it was easy and worked well the 3-5 times I used it over the next few months. I then re-build my engine so the car was sitting in my garage from October to January, out of the weather battery disconnected not being used. Just now I got around to fixing the horn as it stopped functioning, figured the problem lied elsewhere but no, touching one wire to the switch to ground horn sounds. Take my multimeter leads and started probing the switch itself, OL on all configurations. I can see the switch moving and thing still looks brand new but the contacts don't close to complete the circuit.
Russell E Ireland
2025-03-17 18:22:42
Easy install, takes the place of any contact switch, on when you press it, off when you release it.
Robert
2025-03-04 18:33:09
Good quality. Only a 2A though. Did not work for what I needed, but that was my fault for not reading.
Willy
2025-02-11 09:14:58
Working on my son's old 1960's Mercedes. Doing a gas to diesel engine and fuel system swap. The diesel engine injector pump fuel shut off valve operates with vacuum. We used this switch to activate a vacuum valve to send vacuum to the fuel shut off valve on the injector pump. The price was great. Shipping was fast. The switch is heavy duty. The switch is also led lit and we wired it so that it is lit up when the car is running. We ordered the red led lit switch to indicate that that is the switch to shut off the engine.
boise
2025-02-08 15:07:19
Bought to replace a remote battery switch on the boat. As spec’s and went in easily….and worked as expected
Ken Williams
2025-01-17 15:53:24
Solid functioning switch. Fits well with the other switches on my dashboard. Easy install. Wired to open/close exhaust cutouts on my street rod.
bargain-bliss
2024-12-23 10:19:09
It is well-designed with good quality. It is pricy for its class.The light inside might not be an LED, by reversing the applied power it still lights up (LED is polarity dependant). In some cases, it matters whether it is an LED or a bulb.UPDATES: It is an LED. Two LEDs in reverse/parallel directions so it turns on with any polarity (apparently with both DC & AC). As an electronic technologist, I rely on datasheets. If you are familiar with basic electronics, I would suggest putting a resistor (experiment with 150 to 330 ohms/ 1/2 watt) in series with the LED. direct 12v voltage put stress on LED (any LED) and might shorten its life, I haven't used it long enough to talk with certainty.I like it and recommend it as a good quality product.
Wade Robertson
2024-11-28 16:41:29
Used for a line lock button
Mephiskapheles6
2024-11-14 15:36:05
good
Zeph Williams
2024-11-13 16:50:21
The switches were perfect for adding a garage door opener remote system in my car. Very pleased with them.
Recommended Products