Your cart is empty.
Your cart is empty.Product Description
Specification:
- Mounting Cut Hole: 16mm ( 0.63”)
- Operation: Momentary
- Structure: 1NO
- Switch rating: 3A,12V AC/DC
- Contact Material: Silver alloy
- Protection Degree: IP65
- 100,000 Times Electric Work Life.
- No LED Lamp
APIELE Stainless Steel Push Button Switch
This All Metal Switch Functions Manually As A Replacement Of Auto Refit, Boat Refit, Instruments Apparatus, Enter Guard, Household Appliance. It Provides Solid And Crisp Push Feedback And Comfortable Led Light. Ip65 Waterproof Make It Can Be Used In Humid Environment. Metal shell tolerates vibration and other harsh environmental conditions. The Improved Wire Diagram Come With The Switch And A Non-Electrical Person Can Install It Easy. Get A New One If Broken In 3 Years.
- Package Include:
- 1 PCS of APIELE Push Button Switch
Momentary switch
- Momentary switches only remain in their on stateas long as they're being pressed.
- Use this switch to replace the light switch, horn switch or other control switches in the cars/ boats/ trucks.
IP65 Waterproof
- As it is full metal appearance and with a rubber ring, the switch achieves IP65 waterproof degree. It can used in wet environment, such as boat control panel, kitchen, outdoors etc. Note that this switch can be used under water.
Wide Use Range
- It can use as a door bell, entrance guard push button switch in the outdoors.
- Also a good choice to use it as a replacement switch of household Appliances. Such as table lamp switch, PC switch, Audio switch.
DuMond Contracting
2025-08-21 17:27:13
Works great! Solid metal button.
Randy Miller
2025-08-11 11:57:00
Used to manually activate our entrance gate. Works great and feels like solid build quality .
Rob junior
2025-08-05 11:07:24
This switch is VERY LOW PROFILE and works perfectly, extremely easy to install
T. B. Schwartz
2025-07-27 20:33:58
Very nice switch -- no tactile feedback. Has very nice screw terminals for connecting wires.
monteo
2025-07-23 17:15:43
This installed easily, and worked well for 9 months, then died. Used outdoors on a tractor
Gene
2025-07-13 11:20:36
This is a nice little button. It has a positive feel, the finish is really nice, and it should stand the test of time. I would not hesitate to buy again.
Michael E. Dingas
2025-07-08 21:58:40
Got the switch today and made the repair to, I believe, a X-Acto purchased at a BBS some years ago. I determined that the problem was with the momentary switch. I researched buying a replacement but all had a similar issue. That being, the unit did not last long.So I opted to try a repair. The only thing I had to be sure of was the depth of the switch. After all, there's only so much room inside the sharpener housing. After making some initial measurements, I decided that the Apiele momentary switch should fit.With the repair completed, the sharpener is back in business. The only downside is the need to hold/release the switch to start the cut and end it when the pencil is the right sharpness.Installation was easy. However, due to the switch design of the screw contacts I was limited in where I could install the switch and still have access to the terminal screws. I drilled a pilot hole and finished up with a 5/8" Fosner bit. Only time will tell how the switch holds up in usage.
Erik B. Karlsson
2025-06-20 16:25:53
I bought this since my old Alfa Romeo horn triggers on the steering wheel were completely destroyed. Fixing them is a real booger...so I just drilled a hole in the dash and mounted this button to the left of the steering wheel. It works to sound the horn with a simple push. Easy!
Shawn hatch
2025-06-14 14:01:40
I used it for a start button on a 4 wheeler it worked good.
DuMond Contracting
2025-05-27 15:47:02
Works great! Solid metal button.
Randy Miller
2025-05-26 10:50:28
Used to manually activate our entrance gate. Works great and feels like solid build quality .
Rob junior
2025-05-15 20:44:28
This switch is VERY LOW PROFILE and works perfectly, extremely easy to install
T. B. Schwartz
2025-05-01 14:30:13
Very nice switch -- no tactile feedback. Has very nice screw terminals for connecting wires.
monteo
2025-04-19 15:56:00
This installed easily, and worked well for 9 months, then died. Used outdoors on a tractor
Gene
2025-04-15 14:44:24
This is a nice little button. It has a positive feel, the finish is really nice, and it should stand the test of time. I would not hesitate to buy again.
Michael E. Dingas
2025-03-20 15:19:57
Got the switch today and made the repair to, I believe, a X-Acto purchased at a BBS some years ago. I determined that the problem was with the momentary switch. I researched buying a replacement but all had a similar issue. That being, the unit did not last long.So I opted to try a repair. The only thing I had to be sure of was the depth of the switch. After all, there's only so much room inside the sharpener housing. After making some initial measurements, I decided that the Apiele momentary switch should fit.With the repair completed, the sharpener is back in business. The only downside is the need to hold/release the switch to start the cut and end it when the pencil is the right sharpness.Installation was easy. However, due to the switch design of the screw contacts I was limited in where I could install the switch and still have access to the terminal screws. I drilled a pilot hole and finished up with a 5/8" Fosner bit. Only time will tell how the switch holds up in usage.
Erik B. Karlsson
2025-02-11 11:37:41
I bought this since my old Alfa Romeo horn triggers on the steering wheel were completely destroyed. Fixing them is a real booger...so I just drilled a hole in the dash and mounted this button to the left of the steering wheel. It works to sound the horn with a simple push. Easy!
Shawn hatch
2025-01-29 11:08:52
I used it for a start button on a 4 wheeler it worked good.
Recommended Products