Your cart is empty.
Your cart is empty.Product Description
Compatible with BMWModels:
- 1992-1998 318i Sedan/Convertible E36 Series
- 1992-1997 318is Coupe E36 Series
- 1995-1999 318ti Hatchback E36 Series
- 1998-1999 323i Sedan/Convertible E36 Series
- 1998-1999 323is Coupe E36 Series
- 1992-1995 325i Sedan/Convertible E36 Series
- 1992-1995 325is Coupe E36 Series
- 1996-1999 328i Sedan/Convertible E36 Series
- 1996-1999 328is Coupe E36 Series
- 1989-1995 525i Sedan/Wagon E34 Series
- 1993 525iT Wagon E34 Series
- 1994-1995 530i Sedan/Wagon E34 Series
- 1989-1993 535i Sedan E34 Series
- 1994-1995 540i Sedan E34 Series
- 1987-1992 735i Sedan E32 Series
- 1988-1992 735iL Sedan E32 Series
- 1993-1995 740i Sedan E32 Series
- 1993-1995 740iL Sedan E32 Series
- 1988-1994 750iL Sedan E32 Series
- 1998-1999 M3 Convertible E36 Series
- 1994-1999 M3 Coupe E36 Series
- 1997-1998 M3 Sedan E36 Series
- 1991-1992 M5 Sedan E34 Series
- 1996-2002 Z3 Coupe/Convertible E36 Series
- 2003-2006 Z4 Convertible E85 Series
- Packaging Type: Box
- Package Quantity: 1
Michael M.
2025-08-05 15:03:21
These guides are as good as the OEM. They are tight in the main rail but snug in the upper rail.
noman
2025-07-23 16:45:05
This product works better than the original and if you look around for OEM ones it costs up to $ 25 per one and if you look at car parts online they ask for triple the price
Isaac Hall
2025-07-15 17:10:59
Great product but they do fit tight. I had to file mine down a little for them to work properly.
J. Updegraff
2025-07-05 16:56:47
Works great and fits fine for 1997 M3 BMW
Ty W.
2025-07-03 13:18:38
They did the job I needed
E Seto
2025-06-02 17:11:16
They fit into the window regulator channel on this model of BMW. I did not need to shave them as others mentioned. Leave the metal clip in it. Slide it right position and push the ball nub of the regulator arm into clip until it snaps in place. Done. I'm downgrading it though because it's not the same as the original OEM slider. The metal clip is definitely shaped differently. I'm not sure if it's the clip or the overall molding of the slider, but at two points during the movement of the window, the ball of the regulator arm pops. It's not enough for the arm to pop out of the clip, but there's a noticeable bump in travel as the window moves up and down. Seems like it's not holding the ball snuggly enough. Since every time you take off the door panel of an e36, you risk damaging the $600 panel's various clips and plastic door pockets, it's probably worth getting OEM parts when fixing door internals.
Sammy
2025-05-18 17:03:06
it fit perfectly no problem and no issues great quality.
Y.P
2025-04-10 18:54:01
Works as advertised. Make sure to install clip with metal part pointing forward on front connector, and rearward on the aft connector.
Tiffani
2025-03-01 17:20:08
Falta un perno, asà no me funciona.
Gabriel picotte
2024-12-17 15:09:09
Exactly what i need for e36 318i
Owen B Mellen
2024-12-01 15:06:17
The clips are very good quality. I installed in both windows, reset the actuator and both windows are working like new. Well done!!!!
Irwin
2024-11-28 13:12:35
My 1998 BMW 318ti had an issue with the passenger window. It turned out to be a broken regulator slider. I replaced it with the ones I found on Amazon and it worked!
MK
2024-11-26 18:31:47
The metal lock pins formed improperly, causing them dislodgeing from the window regulator easily. photo attached of the original (right) and on the left is from this supplier .
Recommended Products
$29.26
$ 12 .99 $12.99