Your cart is empty.
Your cart is empty.Product Description
Araca Optical System & HD World
- Araca is an electronic component R&D manufacturer and lighting system R&D manufacturer, we apply advanced optical technology to the projector light source.
- We have been improving our production process for many years, and we are confident in the process of the entire production process. The advantages of our raw materials combined with our process are neat and beautiful appearance and stable lamp body. Some customers may find that the bare bulb falls out of the housing when they receive it, but this will not happen with our bulbs.
- Because projector lamps are very fragile precision products, we found that if the lamps are not well packaged and protected during transportation, the quality of the lamps will be greatly reduced due to the bumps during transportation, and even after replacing the new lamps, the new lamps will not work at all. So in order to improve our packaging, we even did a lot of real scene simulations, such as gravity tests, extrusion tests, etc. In addition, we also improved the packaging structure and packaging methods.
- We are eager to take you into a high-definition bright, and dynamic world.
Bulb model: for NP16LP
Ctrl+F to find your model
for NEC M300W M311W M300XS M260WS M361X M300XSG M350X NP-UM300W UM280W UM280Wi UM280X UM280Xi NP-P350X Projector Lamp
The main parameters
- Power: 230W
- Output: 3000 lumens
- Working hours: More than 4000-5000 hours
- Period: 200 days
Our attitude towards products and work
- In addition to focusing on improving product quality, solving customer problems is our biggest priority. We will also meet your requests and suggestions.
- A projector needs more than just brightness. What is most worth developing is the stability and durability of the projector. We at Araca have been able to freely adjust the brightness of projector lamps for many years. Since then, we have been committed to developing the life and stability of lamps.
- In order to solve your problem quickly and efficiently, you can refer to the product manual. If you encounter installation or other product problems, we are always here to answer you.
Innovative technology application
Araca creates high-end optical lighting technology, we focus on projector light source, stage lighting, 3D holographic architectural projection and many other fields.
Raise quality standards
- Improve product quality on the basis of improving raw material testing standards.
- The quality inspection team controls the quality of all processes for us.
Installation steps - (Wear gloves to keep bulb hygienic). If the installation is abnormal, Araca will provide you with installation guidance.
How to extend the life of the projector bulb
1. After the shutdown, only wait for the fan to stop before disconnecting the power.
2. After turning off the projector, wait at least 60 minutes to reboot.
3. Do not disconnect the power directly during use.
4. No more than 4 hours each use time.
5. Make sure there are no obstacles around the projector to allow the projector to dissipating heat normally.
6. Regularly clean the dust inside the projector and the bulb, otherwise the elevated temperature will cause the projector shut down automatically to protect it.
Steven P Reed
2025-08-23 13:04:46
The church projector that hangs on the ceiling had the bulb go bad. Easy replacement.
Zacary Wesoloski
2025-08-06 12:11:57
So far this is a perfect bulb, takes slightly longer to warm up than the factory bulb, also just slightly louder but overall it's the only bulb worth anything on this site. It looks great once you adjust the settings, Mine was extremely yellow at first but after 15 minutes and some color adjusting it looks brand new. I turned it from standard mode to Movie, that did 90% of the color correcting for me.20 days later- still working perfectly
Angry Asian
2025-07-25 15:32:28
When you replace bulb, remember to reset bulb life. With this replacement bulb there was a very strong smell from nec projector.Smell eventually went away after a few days.
Moy
2025-06-12 10:57:18
It turns green when first turned on but returns to normal after a while. Smelled funny in the beginning but disappeared later
Matthew Howard
2025-04-04 14:47:09
Perfect fit and the projector looks brighter to me but I don’t have any equipment to test it
Mike
2025-02-05 17:22:30
We used this bulb for one class (2days) and it burned out.
Kevin Cooper
2025-01-14 21:14:13
Fast shipping. Clear instructions made installation easy. Bulb fit perfectly and works great. Picture brightness looks better than the original bulb. Thank you Araca.
Cali Split
2024-12-31 12:55:38
Came quickly and worked great out of the box. Will update if necessary.
Recommended Products