Your cart is empty.
Your cart is empty.Product Description
Specialty - Engine & Ignition
-
Harmonic Balancer Puller Set
Easier Removal Of Damper Pulleys In Tight Engine Compartments
This ARES Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator. With steel construction, you'll have the extra strength and enhanced design you need to get the job done. Whether you're working on a Chrysler, GM, Mitsubishi, Cadillac, or Oldsmobile, this set is the right fit.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
Master Harmonic Balancer Install Kit
Inclusive Coverage For Installing Balancer Pulleys On Domestic & Import Vehicles
The ARES Master Harmonic Balancer Install Kit includes a threaded driving stud, a heavy-duty driving nut with thrust bearing, 12 threaded install adapters in both metric and SAE thread sizes, four long-reach threaded press rods, and a heavy-duty case for easy storage and transport to install harmonic balancers on most domestic and many foreign vehicles. Featuring solid steel construction with a black phosphate finish for enhanced strength and durability. Note: Harmonic balancer installer only.
-
Ratcheting Serpentine Belt Tool Set
Removes and Installs Spring-Loaded Belt Tensioner Pulley Model Serpentine Belts
The ARES Ratcheting Serpentine Belt Set is a comprehensive set of tools and accessories, constructed of durable Cr-V Steel with chrome and black oxide finish, suited for removing and installing serpentine belts. It has a ratcheting wrench that allows for easier torquing, and a long extension bar that mates with the ratcheting wrench for maximum extension, allowing adjustments in cramped and obstructed spaces. This set is perfect for makes and models with a spring-loaded belt tensioner pulley.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
5-Piece Magnetic Swivel Spark Plug Socket Set
Easier Tune-Ups In Tighter Spaces
This ARES Magnetic Swivel Spark Plug Socket Set easily removes and replaces spark plugs with extra length and leverage for hard-to-reach areas. The interior magnet on each socket grips spark plugs tightly without wearing them down. The heavy-duty retaining ring provides superior durability and strengthens the swivel joint to keep the socket intact. Made of durable, heat treated, Chrome Vanadium Steel, with Chrome plating in addition to its 360-degree swivel action for maximum flexibility.
-
Offset Extension Wrench Set
Zero Degree Swing Arc for Confined Fasteners
The ARES Offset Extension Wrench Set is a versatile, impact-ready tool set that includes 10 low-profile sockets and can be used with impact or pneumatic wrenches to help you tackle fasteners in tight spaces. Made of sturdy steel and high-quality, lightweight aluminum, this wrench is built to last, and thanks to its zero-degree swing arc and chain-driven design, it has you covered for jobs ranging from water pumps to A/C compressors to transmissions and beyond.
-
2-Piece Offset Spark Plug Boot Removal Pliers Set
Easily Remove Hard To Reach Spark Plug Wires
The ARES 2-Piece Offset Spark Plug Boot Removal Pliers are 7.5 inches long, made of forged high carbon steel with polished nickel finish, these pliers also have double-dipped textured handles. The single offset removal pliers are perfect for spark plug wires found on GM 3.1L, 3.4L, 3.8L, while the double offset jaws give you access to spark plugs in rear boots on V6 transverse mounted engines. Their 5/8-inch hose opening also allows you to use these pliers to grip hoses, thick wire, and more.
Jimmy F.
2025-08-21 14:51:18
Worked as it should , good quality and a great price
Carl Shortt
2025-08-13 16:10:13
I bought this to do the oil pump on my 6.2 and was a little hesitant due to the price. I’m a professional mechanic and I’m used to using Mac, Matco and Snap On tools at work. I needed this for home and the others were more than I wanted to spend for something at home.Don’t let the price scare you, this is a QUALITY tool! Quality I would expect from one of the three mentioned above. Worked like it was supposed too, perfectly! These LS motors can be very hard to remove the balancer from. “Cheap†tools can’t handle removing them, they’re just too tight. This one worked excellent! Never slipped off, good quality threads on the center portion. Threads are nice and tight, like they should be.You can drive it with either a 3/4 wrench, 3/4 socket, or (and this is where this tool beats the big three) a 3/8 ratchet alone. Located on the end of the threaded rod is a 3/8 female receiver for your ratchet. I can’t tell you how nice that is.The case is a standard blow-molded plastic case but holds the tool nicely.One thing I recommend, get you a tube of extreme pressure grease and grease the threads. Makes tools like these work so much easier, besides protecting the threads.I use the Quicksilver extreme pressure grease. It’s the best I have found so far.Thank you for a quality American made tool at such a reasonable price!
Landon
2025-07-21 10:13:24
Worked perfect on my 2017 Ford Explorer 3.5L Ecoboost. Great quality. I didn’t use the extension that came with it. I slid a smaller bolt in the crank and this puller didn’t slip once.
Remi Caron
2025-07-14 15:14:11
The product description was accurate and it did what I needed it to do. The quality of the tool feels solid, not a one and done kind of tools. I'm happy with the purchase.
Not Happy
2025-07-03 13:44:09
It looks good haven't used it yet.
JEL
2025-06-17 18:17:47
Seems it was designed for for the LS type GM engine , i have many pullers & none i own was as user friendly for a LS engine style balancer as this one , motor is on engine stand so it was used in the easiest manner , but if motor is in vehicle , this puller would be excellent as it is designed also to be used in tight locations , Corvettes ,Camaros Etc , it comes with 4 different length rods for depth ,No assembly required , pull out of case , choose rod needed and that's it , i pulled a balancer off a GM L33 (5.3) on engine stand with a Dewalt corded impact , it took longer to get the impact out of tool box than it took to remove balancer . Buy it you will love it
cody b
2025-05-15 18:48:08
great product! well worth the money! best puller for LS/Hemi by far! can’t beat it
richard
2025-05-08 16:22:02
Used with hand tools and have taken balancer on and off at least 10xs and no wear indicators
Customer
2025-04-15 14:03:35
Get the harmonic puller that you’ll enjoy using - like this one !!! Worked flawlessly and perfectly.
Customer
2025-03-31 13:26:02
Worked great on my 3.7l Jeep engine.Pulled balancer off with the rad still in.
Squeral
2025-03-08 14:30:15
Pulled the front pulley off my LS2 with ease!
Allen James
2025-01-14 16:56:31
Well made, worked on Jeep 4.7l V8
JB
2025-01-10 13:25:09
Very nice kit and did exactly as intended. Do not waste time and money on others as I did.
Recommended Products