Your cart is empty.
Your cart is empty.The DVAG17N Direct Vent Wall Heater from Ashley Hearth Products makes the perfect solution for zoned heating. The space saving direct vent furnace design mounts to an exterior wall and the adjustable vent assembly adjusts to fit walls from 4-1/2 In. to 10 In thick. For clean, comfortable heat when and where you want it, the gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through the vent and combustion products are vented directly to the outside. Only clean, gentle heat, In continuous circulation is delivered into the room. Windows and doors stay closed because no room air is used for combustion. The DVAG17N direct vent natural gas wall furnace is designed to heat up to 570 Sq. Ft., and has a 17,000 BTU input.
cat food
2025-08-14 21:32:58
So with this heater I noticed that there was a lot of issues with people lighting it and I feel that's user error. You need to prime the line with gas before it can light. But once it's primed, it's pretty easy to get going. The box was damaged In transit. But didn't affect the heater.
Forrest C.
2025-06-30 13:18:40
pilot light dose not work correct It has a nice 4 finger blue flame and when the burner lights the pilot light turns into a 6 inch high red flame the color of a lighted match. Needs a new pilot light assemble. I will the company Do not buy this heater . It does not heat a well insulated room 322 sq foot room . Most the heat goes out the exhaust . It takes 2 to 3 hour to heat up 10 degrees . It does not do the job . But this not a returnable item. So I am stuck !!!!!!!
Abie
2025-04-20 10:44:03
I was able to install the heater without any problems. You MUST follow the instructions in detail, step, by step and it all comes together. After holding the button down for a few minutes to bleed air out of the system, it fired up immediately. It does smell a bit since it is new but I'm sure that will wear off. i don't understand what the bad reviews are all about and assume that the reviewers don't know what they are doing.
David
2025-01-08 16:09:49
This is my second garage heater. The first was just too old and had a cracked heat chamber.The Good: It is nice to look at, heats my 2 car garage and has easy controls. The flue pipe has fiberglass insulation wrap for heat safety.The Bad: For it's size, I think it costs too much, but it looks like ALL the contained flame heaters are more.The Bad, continued: Easy instructions UNTIL...You have to do a lot of metal cutting for the thickness of your wall. The seal up against the back of the heater is just pushed up against it and seal pressure is from the outside piece secured to the siding, so if you cut flue pipe or intake too short there could be a gap where gases escape. It took me 30 minutes to hang the heater on the inside and 3 hours to cut flanges, and 2 pipes, caulk and paint. If the heater came with the intake and exhaust pipes already attached, the box would be Ginormous! Maybe it should have had big threads and the pipes screwed into the heat box?Bad continued part 3: The burn in. It took about 5 days of burn in with a very bad smell. I had to leave the garage door open and fans blowing. I used a respirator when out in the garage.Conclusion: I love it now, don't know how long it will last. It's made in CHINA. A mean, aggressive communist/socialist country that wants to take over the world! I couldn't find one made anywhere else. Maybe they're out there. Keep looking, but I have no idea how you would find out how the flue part is assembled. Maybe from reviews like mine.
JimBob
2025-01-07 10:43:05
I could not get the heater to light after mounting and connecting.Called the guy who ran the gas line and he used a pipe cleaner to clean out the gas line.We found that the line was clogged in the last one inch of the connection next to the igniter.We disconnected the gas, took out the ignition unit. Separated the last two connectors on the gas line so he could insert a pipe cleaner in. He pulled out a tiny bit of spider web and it started easily after assembly.Must have come with a spider from the factory.Was told that compressed air to clean the line will not work. Need to use a pipe cleaner.
Kai Kendall
2024-12-04 09:38:04
If you want a simple, well-built silent heater that just works well, this is it. No wall thermostat, no Bluetooth, no app, not linked to a ring account, no wiring.Fantastic, exactly what we wanted.
Ann S.
2024-11-27 13:04:53
Heavy gage metal, easy to install. Looks great in my studio. ready for winter.
Cheryl
2024-11-15 16:56:58
This heater is awful! It takes forever to get it to light IF you can get it to light and it just shuts off for no reason. AWFUL AWFUL AWFUL DONT BUY THIS HEATER!
Recommended Products
$1,229.00
$ 99 .00 $99.00
$449.00
$ 99 .00 $99.00