Your cart is empty.
Your cart is empty.Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.
Customer
2025-09-03 19:21:46
they came fast. Great price. worked perfectly.
Joel Mcgregor
2025-08-12 16:43:59
These seem to be adequate quality for the job. It is great to be able to add threaded holes in sheet metal. I wish I knew these were available years ago.
Robert siwik
2025-07-14 14:02:13
Easy to use if you have the correct tool. If not a bolt and a nut will work to set them. Would buy again.
luciano rodriguez jr
2025-07-12 10:34:59
good quality and good price
Tom Lory
2025-07-04 10:53:12
This review is for Astro Pneumatic Tool RN14 100-Piece 1/4-20 Steel Rivet Nuts ordered 2021-07-31 and received 2021-08-01. The cost was under $5 with Amazon Prime.I needed to replace two rusted and spun riv nuts that secure cleats to the bedside of my truck. I had bought two new ones locally but applied too much pressure when I installed them which tweaked the alignment between the flange and the body so my screws went in crooked and not centered so I turned to Amazon rather than spend 25 minutes back and forth to the local hardware store (LHS) the next day to pay 25 times the price for them.Like others have experienced, there were 6mm x 1.00 rivet nuts (26 of them) mixed in with the 1/4-20 pieces that I needed. In the end, this is a bonus for me as I may in the future want metric ones and the 72 remaining 1/4-20 are plenty. I appreciate that a mix of threads would be a problem in a professional or manufacturing environmentIt was irritating when the first 4 that I tried wouldn't thread onto my riv nut tool which had me thinking that I made a mistake with the thread pitch. A thread gauge proved that my screws were truly 1/4-20 and the label on the package also indicated 1/4-20 so I dug deeper into the bag till I found a 1/4-20 and 3 minutes later I was done.Beware that riv nut outside diameters evidently vary as these have a smaller OD than the 1/4-20 riv nuts that I bought at the LHS which unfortunately made me enlarge one of my existing holes slightly with a stepped bit. The Astro Pneumatic pieces measure 0.3485 inch body with a 0.4855 inch flange which is probably closer to the old riv nuts that I replaced. It worked out but I wish that I had done some homework before running off to the LHS.
Mitchell Hartman
2025-06-25 10:54:00
1/4-20s worked perfectly for mounting shelves and plywood lining for the cargo area of promaster van. I used river nut setting tool from harbor freight.
Dean
2025-04-26 13:38:44
Wanted to add a rail in my Ranger truck bed for extra strap mounting points. Unistrut channel was my first choice--it's economical, versatile, etc. and there is a place below the top rail that it would fit. Since it's only single thickness sheet metal and not accessible from between the inner/outer walls these seemed like a good choice. Match-drilled a bunch of holes (9mm) in the bed and installed with the Astro tool. Once screwed in it seems solid but I may still add a few more where I can.
Mike
2025-04-22 12:05:30
Strong
Customer
2025-03-21 15:14:19
item as described. not a terrible product
Cliente de
2025-03-13 15:37:16
Es una gran herramienta, exacta y muy util, la he utilizado en las facias y defensas de plastico y queda muy firmes y buen soporte para las placas; para que trabaje al 100% de eficiencia se deben usan las brocas para la perforacion exactas.
AKD
2025-03-10 12:46:25
Good product fast shipping
cuetoher
2024-12-01 10:09:27
Es lo que buscaba,,,,, lo malo que en amazon México compras algo a muy buen precio e inmediatamente ese mismo producto ya cuesta al doble .. muy mal ..
Claude
2024-11-14 16:04:33
Mais attention de ne pas trop serrerGraisser idéalement à chaque fois
Recommended Products
