Your cart is empty.
Your cart is empty.Product Description
Auniwaig Chucking Reamer Tungsten Steel
- The Reamer is made of tungsten steel, high temperature, wear resistance, good toughness, etc.
- Used for semi-finish machining and finish machining of holes.
- Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non-ferrous materials
- The Reamer is with one or more cutter teeth. Holes can be with exact size and shape after the reamers' processing. Finished product can be smooth, intact and more beautiful
Warm Tips
Reamers can be used to process holes in small cuts based on guiding function, such as:
- holes with diameter tolerance in ≤IT8;
- holes with requirements in surface roughness (≤Rz12 genrally);
- holes with requirements in roundness tolerance;
- holes with requirements in cylindricity;
- stepped holes (different diameter holes on the same axis);
- series holes (diameter holes on the same axis) with requirements in high coaxality.
Technical Parameters:
- Precision: H7
- Material: Tungsten Steel
- Surface treatment: Uncoated
No Coatings
Designed with the base substrate without any additional coatings, good for wide ranges of applications.
Tool
Made of heat-treated tungsten carbide material, these reamer cutters have high hardness.
Features
Sharp cutting-edge, high cutting ability, high accuracy, long service life.
Straight Flute
Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications. For reaming cylindrical shape holes.
Widely Used
- Can be used for processing holes, mainly to improve machining precision of holes and reduce the roughness. Can be manually operated or installed on drilling machines to work.
- Applicable for reaming to mold processing and handicraft processing. Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
- Designed for accurate reaming in most materials, using all types of equipment including screw machines, turret lathes, drill presses and machining centers
WSC RN
2025-08-11 14:51:23
I took a chance based on another vw reviewer and it worked just fine . My advice is go slow and use a lot of cutting oil . Do not force the tool light pressure only . Once done the king pins had zero play .
SRH
2025-07-22 16:53:33
Thanks. Made life way easier rebuilding the front end of my Baja bug.
Xnerd1963
2025-07-05 14:39:40
I finally received my reamer I read two gear blanks that I've been in a rush to get done for a customer they were both ruined they had to be 5 eights to fit on a 5 eights plus 0.002 mandrilafter they completely fell off the mandrel I measured the reamer and it measured 0.6380across a couple of the flutes. Who has ever heard of a precision tool Being off that much/who has heard of a precision tool being off at all? I am so sick of these companies and their terrible accuracy I would be willing to pay three times more just to have a little bit of quality I guess I'm not gonna be shopping on Amazon anymore
L&S
2025-03-08 18:37:22
So not the most impressive reamer for sure. It is to size and appears as though it could have been higher performance when it was 1st machined. The steel seems good the angles look right. However all 6 pictures I provided are for all 6 cutting surfaces and EVERY single one is already damaged when taken out of its protective wrap. To be clear that means it was already damaged when it went into the wrap. The damage is sleight and it will still cut reasonably well and most definitely better and truer than a twist drill... but really? There are 2 reasons folks use reamers and they are to make a hole a uniform size for its length (this will do that well) and to make that hole very very smooth and perfect (that's where this one's performance will be a tad lacking due to cutting edge damage. The damage hurts performance the performance of the tool. It can not perform as well.End result, I will use this where size is more important than finish and be pretty happy because it will save wear on my much higher end reamers.
TM Carr
2025-02-05 21:10:14
good quality HSS reamer. Flutes are very sharp and is true .625". This is as good of quality as any other HSS reamer I have used in the past.
Kindle Customer
2025-01-31 18:00:50
Sometimes it is worth it, buying the cheaper tool because you are only going to use it once.This in not one of those tools.Don't do it, keep looking, it isn't worth trying to save money for this !!
Joel Barton
2025-01-27 11:58:33
Works great.
Randy McNally
2025-01-05 16:19:29
Grinding finish poor, start of reamer under ground. See picture.
Recommended Products
$30.17
$ 12 .99 $12.99