Your cart is empty.
Your cart is empty.Product Description
4 PACK 0130F00010 Flame Sensor
- Total length:3.8 inches/probe:95 mm.
- Used on the gas stove machine to detect the flame and protetct you from gas hazards and close the valve in time.
REPLACE PART
B1172606 B11726-06 20488501 ACS90453BXA P1257001F P1257007F ACS90703BXA P1257002F P1257008F
0130F00010 Flame Sensor designed for Good.man/Ama.na/ken.more brands
FIT MODELS
0130F00010 Good.man furnace igniter fit GMS80603AX, GMS80604BX, GMS80603AN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GMSS960803BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205D, ACEC800403AXAA, ACEC800603AXAA, ACEC800603BXAB, ACEC800804BXAA, ACEC800804BXAB, ACEC800805CXAA, ACSH960905DXAA, ACSH961155DXAA, ACSS920402BNAA, ACSS920603BNAA, ACSS960603BNAA, ACSS960804CNAA, ACSS961005CNAA, APG13240451BB, APD1436080M41AB
Installation in Just 4 Steps
Step 1
Turn off the power
Step 2
Find the location of the ignitor
Step 3
Remove the old ignitor
Step 4
Installing a new ignitor in the same location
InquisitiveGuy
2025-08-26 12:40:44
Sensor works for the winter and may need cleaning the 2nd year depending on how long it was used.
Paul D.
2025-08-12 10:54:27
It's been working since 1/2 way through last winter we'll see if it last longer. It came work a few sensors so if it stop working I have more
Jason Lepak
2025-08-06 11:02:04
I was having problems with my furnace and I knew what it was, but when I had everything apart going through every single sensor, I noticed how used/worn everything was... So I decided to replace everything but the control board since all of the parts together cost a lot less than a new furnace. (minus the heat exchanger)This flame sensor is an exact match to the one in the furnace already and it worked just as perfectly.My furnace is a Goodman GPG13xxxx model and now I am hoping to get a lot more years out of it.
Nicholas M Todorow
2025-07-23 15:20:23
Worked out great
Vgk
2025-07-19 12:45:53
Item was just as good as the original that was replaced.
Capanta
2025-06-25 20:00:22
Great product
RICHARD MAXWELL
2025-05-25 13:02:16
Works as expected ðŸ‘
Stampcats
2025-01-22 21:18:33
How about these in December of 23 my furnace was put in in 2018 so the original flame sensor lasted about 5 years. This one lasted a year fortunately they sent two so I was able to put the second one in but it's just like throwing your money at a wall and hoping it sticks
Recommended Products
$14.99
$ 7 .99 $7.99