Your cart is empty.
Your cart is empty.Product Description
BANGTING Honeycomb Solid Tyres for Scooter Tires (Diameter 8.5 inch, Width 2 inch)
Compatible Models:
- Gotrax GXL V2 / Gotrax XR / Gotrax APEX
- Xiaomi M365 / Xiaomi M365 pro / Xiaomi Mi Electric Scooter 1S / Xiaomi Mi Electric Scooter Pro 2 / Xiaomi Mi Electric Scooter Essential / Xiaomi Mi Electric Scooter 3 / Xiaomi Xiaomi Electric Scooter 3 Lite
- Cecotec Bongo Serie A / Cecotec Bongo Serie A Connected
- Hiboy MAX V2 / Hiboy S2
- Ducati Pro1 Evo / Ducati Pro1 Plus
- Zwheel Serie E9
- Denver Sco-8535
- Vivobike S2 / Vivobike S3
- ......
- For All Scooter Tires (Diameter 8.5" Wide 2" )
The full honeycomb tires are made of high-quality natural rubber. It is twice as thick as other products and is characterized by good penetration resistance, excellent tear resistance, scratch resistance and durability, which makes it more stable and comfortable when driving.
It is more durable than other conventional inflated tires. Let yourself fall in love with this new scooter.
Come! Your scooter is now ready to drive!
Anti-slip layer
Thanks to its anti-slip layer, the tyre can be prevented from slipping in snow and rainy weather without danger to the scooter.
Anti-Drop Layer
The inner layer of the tyre has an anti-drop layer. Make sure the tyre is firmly connected to the wheel hub. It's just as safe, even if it's faster.
Honeycomb Design
Honeycombs with supports and newly enlarged holes can provide better shock absorption. And the honeycomb holes can dissipate heat faster and serve longer.
How to install?
Step 1
Soak the tyre in hot water of 50-80℃ for 5-10 minutes before mounting to make it softer and easier to install. Make sure the tyre is fully immersed.
Step 2
Cover the inside of the tyre with soapy water or with a special tyre lubricant (avoid using grease, otherwise the tyre will be damaged).
Step 3
Place both sides of the hub on the tire and step on this side (it is recommended to put another tire under these tires).
Step 4
Use the professional tire levers to insert the hub into the tire.
Frank G.
2025-08-29 15:48:08
The tire quality is excellent, no issues and even to change the tire wasn’t a huge deal. The comfort while driving is amazing. In total I can state that this tire is a really good fit for me and I’m absolutely pleased!
Damian Tran
2025-07-16 17:37:34
Putting these on was much simpler than the replacement tube tires. I bought tools, vice grips, and a few more, and couldn't get the tube and tire installed. This was much simpler, with the included tools and a long screwdriver.
J-Rit
2025-07-12 17:26:23
A little harder ride but I feel more grip from the road. I already had 1 puncture and 1 loose valve in the original tires so switching to these hard rubber made more sense. The installation was a pain - took me approximately 3 hours to complete. Disassembly is pretty straightforward. I used a heat gun to remove the reflectors and glued them back with super glue weld (not before drilling a hole at the top to be able to loosen the allen screw in the future in case is needed). The removal consisted of using two tire irons and one long screwdriver. I was not concerned about removing the old tire and tub intact as I was not planning on reusing it. Takes quite a bit of force to get it out - expect some scuffs on the rim (just don't bend it). I soaked the tires as instructed and lathered the rim and inner tire with liquid soap. At this point I secured one end of the tire in, the inserted two tire irons and the screw driver to pull the tire over the rim. I did the first one alone after several tries but it's a bit easier if you have someone else to help you hold one of the tire irons as you pull and tug over the rim. Once that is in, just center the tire on the rim using the holes and a screwdriver. I watched several different videos on youtube for installation and more-or-less combined different techniques from all of them to get the job done. Good luck!
Jamaal williams
2025-06-17 18:27:40
Likes others have stated….. this tire is a pain. I boiled it to start. Still struggled! After about 30-45 min of frustration, I put both feet on each side of the tire while using the screw driver to stretch the tire. Finally it pops on the rim! You will get frustrated. Remember to breathe or take it to a bike shop and pay the $20 for them to do it for you. Lol
Jose Caceres
2025-05-09 11:54:07
They look like they would last a lifetime with a little care. Not very easy to put on the rims, but they feel very good once you get them mounted and ride your scooter again.They feel very resistant, and make the road a little smoother.
BP
2025-04-18 18:24:12
Likes the fact that it won’t go flat but it was a pain to get it on the rim. It took three people to put it on. 45 min of wiggling and shimmying with cuts and bruises. But we did it and it won’t go flat.
Marcia Dukes
2025-03-16 16:05:45
The tires went on great and functions exceptionally but I paid extra to get the tools which I didn’t receive and I ordered a white trim and got a tan which isn’t even one of the colors.
Customer
2025-03-01 11:22:12
The install is pretty straight forward. It comes with 1 tire prybar. I used one long screw driver as additional prybar. Old tires came off very easy but putting the new ones on are challenging. I did not boil the tires or use lube, just straight leverage, my feet, body weight and the 2 pry bars. Took me a total of 2 hours to take both rims/tires off scooter, tires off and on rims again and reassembly. I'm 6'1", 185 with a VERY bad back, so if I can do it. . . . . Ride quality is a lot different. A good bit more rough (not sure if the tires "break-in"or not) but it does move faster. I picked up an additional 3 mph. Maybe since it's a harder tire?!?!?! Anyway, I'd recommend these and when/if they wear out, I'll buy them again.
Maik Petzold
2025-02-24 18:43:56
Super Produkt und das Werkzeug, zumindest das Montiereisen ist super praktisch. Der Tipp die Reifen vor der Montage in heißes Wasser zu legen war Gold wert. So hat die ganze Montage keine fünf Minuten gedauert. ðŸ‘ðŸ¼
Liliana
2025-01-06 12:59:31
Buscaba unas ruedas tal cual.Un poco difÃcil de montar pero me he apañado con videos tutoriales.
Ana
2024-12-22 13:00:35
las llantas se ven bonitas, pero cuestan muchÃsimo trabajo montarlas incluso calentándolas en microondas, con pistola de calor o en agua, es muy tedioso, por otro lado varias personas me indicaron que no son adecuadas porque no tienen amortiguación, a mi en lo personal para meterlas fue un gran problema por lo duras que están lo que requieren se pagan con todo y el cable del motor y en estar presionando para que entre se tronó el cable del motor, lo que ocasiono un daño mucho mayor que estarle pagando las llantas de aire, si pueden evÃtenlas!.
Gabe
2024-11-24 16:38:21
Tubeless is the only option available. I will never ever spend 2h to change the damn tube ever again.However mounting these tubeless and probably any other is a massive insane pain in the neck. Makesure you soak the tubeless in hot boiling water for at least 10min. and stick a screwdriver in the holesto adjust the position of the tubeless on the wheel or your'll never make it.
filippogx72@libero.it
2024-11-16 15:52:44
Mi piace come stano su al monopattino lo consiglio a tutti
Recommended Products