Your cart is empty.
Your cart is empty.
3/8" Tube OD x 1/4" NPT Thread
Material: Copper and Plastic
Shape: Straight
Working Pressure:0-1.0 Mpa | 0-145 Psi
Fluid Type: Air
Working Temperature: 0-60°C | 32～140°F
Applicable Tube:PU / PA / PE / PVC
installation method:
1 . After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
2 . After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
3. When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
4. After installation, you just need to rotate the joint body to adjust the direction of the pipe.
Juan Z.
2025-09-03 15:00:30
These fittings worked great for me! No LEAKS!
Joe
2025-08-29 15:43:02
I still wrap these with Teflon tape, but no leaks and great value!
peter tomasello
2025-07-04 10:44:35
Works on clear canasta with plumbers tape
Laura hoffman
2025-05-05 10:48:21
They work well, but the threads are too short. Use a lot of thread sealant. I used them to add water lines to my camping trailer.
Customer
2025-03-30 18:13:24
easy to install
Akshay Kurhade
2025-01-04 17:27:10
Worked like a charm, no leaks, great sealing
Jeremy
2025-01-03 12:10:37
Solid and easy install. Durable connections
jimgenshart
2024-11-23 16:32:23
so far so good,love thes shark bite fittings.
Recommended Products
