Your cart is empty.
Your cart is empty.Product Description
9005/9006/H10 LED Bulb Canbus Decoder Kit Features
Bestview provides you with high-quality 9005/9006/H10 LED Canbus decoders to solve the decoding problems after you install LED bulbs.
Warm Tips:
* May not solve all compatibility issues as every car system will be a little different.
* Since Canbus decoders can get very hot while working, it is best to mount them in a ventilated area and on heat-resistant/non-burning metal for longer life.
* Please make sure our Canbus socket type is suitable for your car before you buy
MORE DETAIL
LED Light Adapter
Hologen Bulb Power Adapter
Aluminum Design Body is More Durable.
Braided Cables Help Avoid Current Interference
All in One Design
- The LED can-bus decoder has an all-in-one design, just connect the wire with the provided connector.
- Plug-and-play setup for LED light kit.
Compatibility
- Built-in powerful can-bus chip, compatible with 95% of onboard computer systems on the market.
- Solving the fault alarm caused by LED light failure/bulb rejection, excessive blinking, no blinking or bulb burnout indication, etc.
Specification
Voltage: 9~16V
Electric current: 0.4A/13.5V
Power: 5W/13.5V
Service temperature: -40°C~+85°C
Capacitor: 10000UF
Andrew
2025-08-24 10:29:29
These 9005/9006 models worked perfect on my 2007 Jeep WK Grand Cherokee. Without them the LED headlights would flicker when they were shut off. Even tho the headlights I purchased were “canbus compatible†it still required these. These modules don’t get hot like regular resistors so much safer and they draw way less current so your charging system doesn’t have to work so hard. I’d highly recommend them if you have a Chrysler vehicle that uses the TIPM or BCM to control the headlamp circuits. Probably work on other makes and models as well but I can only vouch for my Jeep at this point.
Seahawks4life
2025-08-08 17:31:26
It's been 15 days since I installed it and I've been driving about 5 times a week. The DRL (Daytime Running Lights) warnings are gone! I hated to see the yellow warning light up on my dash. It's pretty much plug-and-play. I don't know if they get hot, but I paid nearly triple the price to get quality ones. You get what you paid for and these look so much better than the cheaper priced one. I used LED to replace my incandescent bulb. I hate yellow light. 6000k lights are the way to go.
USSWisconson
2025-07-31 09:47:38
Not only did this not make the 'dead headlight' error codes go away, but it actually made the headlights lag and not function properly.Ford Freestar/Mercury Monterey
Brandon A
2025-07-22 21:25:16
Maybe to good of a product!So the wire that goes from the adapter to the headlight is kind of thick and wouldn't bend that easily to fit in the housing. 2016 sonata.Made a quick modification to the headlight housing and it fits fine now.Product stopped the led headlight flickers and the dash warning lights.
Buell guy
2025-07-12 11:32:29
So I installed LEDs into my 2015 Chrysler Town and country. They had pretty bad flicker. Purchased these, installation was a breeze, did not change the color of the LEDs at all. Seem really good waterproof and build quality is great waterproof connections. Value for the money is definitely there fit perfectly. Be patient though, it took 2 days of driving for them to perfectly balance out any signs of flickering. Definitely stepped up the brightness on my daytime running lights a bit
Ajax
2025-06-20 13:38:38
Update - The seller reached out to me and kindly offered a refund without requiring the return of the item. Since I no longer have to return the item and I still needed a pair of working CANBUS decoders, I chopped the oversized connectors off and soldered on some normal sized ones (see attached pic). I can confirm that these work well and eliminated the CANBUS bulb out error in a Volvo P3 XC60 w/ LED bulbs. Because I was able to use the decoders I changed the rating from 1 to 4 stars.I'm sure this would be a great H11 Canbus decoder it would fit inside the headlight housing. For some reason this manufacture thinks its a good idea to have the connector that goes to the bulb be 3x longer than an normal connector, see attached picture. Returning.
isaac
2025-05-29 21:07:24
Lamp out code gone, when turning headlights on high beam-they would go out a second then come on, that's gone-they work fine now. Thank you so much to you guys who created these, I honestly had my doubts but they work!Also, side note-I bought the more expensive conversion LEDs-around $60. They were supposed to come with decoders built in, but they didn't work obviously. So I attached these actual decoders to them, and this product fixed all the issues. :)
sidney hamm
2025-04-13 17:12:01
Good product installed on my 2016 GMC canyon after I got some LED headlights, they would flicker due to running in DRL mode but did fine in regular low beams, this not only fixed the flicker but improved the overall performance of the LEDs, better color and brighter. This is a must if you have a CANbus vehicle designed for halogens. Fit in my housings and feels like great build quality.
Jonny K
2025-03-07 17:20:32
It definitely fixed my problem with the LED lights flickering on my 95 eagle talon. 😄ðŸ‘
jithin
2025-02-17 18:42:09
I installed a new LED bulb with a built-in decoder on my 2006 Lexus GS 300, but it was flickering. I then tried using an additional decoder, but nothing changed, so I decided to return it.
Recommended Products