Your cart is empty.
Your cart is empty.Engine and workshop crane accessory is a 3-position steel engine leveler with an adjustable handle. It features a load capacity of 3/4 tons (1500 pounds) making it is an ideal choice for garage, workshop and agricultural work. Featuring (4) 14" Long chains, each equipped with an L-shaped bracket assembly. It is fully adjustable, with three position chain mounting holes to adapt to different engine configurations. Simply connect the chain to the engine, and use the crank handle to quickly and easily adjust through the threaded shaft to easily balance the load. This heavy engine leveler is easy to change the center of gravity, saving time and labor. It also includes a one-year limited manufacturer warranty.
Martin's C.
2025-08-29 10:27:56
Bought this hoist accessory to make my work easier. I remove and install engines as part of my retirement work. Had a friend that used this type unit and was impressed, but his broke down due to inferior construction. Saw this on Amazon at a give-away price and figured I would take the leap. Could not believe how well this hoist adapter works, regardless of big block or small block engine size. It is easy to bolt up. It is compact in size. But, best of all, the threaded position system works effortlessly. Big Red continues to make good and reliable products.
Customer
2025-08-17 17:20:57
Worked great to install engine in my car the angle adjuster works great
Kristopher P.
2025-08-15 10:07:54
Very happy with this leveler. Nicely made and comes mostly all assembled.Performed well and helped immensely with removing the broke motor and installing the new one. Especially useful for angling the motor exactly to mate with the transmission in the truck.I recommend a good lubricant on the exposed main leveling screw (Schaeffers Penetro worked great!).
brian
2025-08-05 11:33:37
This is a great upgrade to my old Northern Tool leveler. The adjusting rod is far beefier and the adjustable position on the main bar is great. I do not like hoe the main bar, the red one, is loose fitting. It wobbles easily and is nothing like my old one, where it is made of steel square tube. I would have liked to see maybe some steel bushings on the sides to stop this, but that goes against the lowest cost possible to produce. This is something I plan on modifying (adding bushings) to resolve this issue. I dislike the possibility of an unexpected slip that can stress the parts, which can lead to an unexpected failure, although unlikely. I also dislike the mounting of the chains to the main bar. The shackles are sloppy on the main bar, with a lot of movement to each side. This again I would like to see more support to prevent unexpected slipping and movement.All that said, the product works good. It seems to be a product of the quality is good enough to do what is claimed. Given the price, I find that acceptable, especially since I might use this once per year. For a DIYer, this is a great product. IT will do what is needed and do it well. Spend more if you want on other brands, otherwise, this will do what you need.
Han D.
2025-07-29 09:52:17
Bought this when I got a new engine hoist and glad I did. Really handy to have.
VineReviewer
2025-07-16 10:17:32
I bought this one because it was far less than the cost of the name brand version. I only needed to lift a small MG 4-cylinder engine (about 250 lbs) and it is more than strong enough for this task. The ability to adjust "the angle of the dangle" is important when you need to clear a firewall, motor mounts, or align with a geabox, and the hand crank makes that easy. It seems well built and should handle anything up to its weight limit. Just keep the screw greased, don't leave it out in the rain, and it should provide years of service.
Todo perfecto
2025-06-20 12:32:19
Llegó todo bien
Kalmairn
2025-06-02 09:32:57
I did two engine swaps with this tool and it worked well overall with some caveats.There are a few minor gripes that others have mentioned - at steep angles the handle interferes with a chain which can make it difficult or impossible to turn, and the plastic knob on the handle comes unthreaded.The leveler will drop shavings as the metal rod and guide cylinder wear. You will want to make sure there are no openings for those shavings to land in and potentially cause harm.My leveler experienced a failure of the metal cylinder the threaded rod passes through to angle the engine. The threads internal to that cylinder wore out from use, resulting in it skipping teeth while trying to adjust the angle. These loads were well within the weight rating, this is simply result of wear.I suggest adding grease to the threaded rod to reduce wear on the rod and particularly the positioning cylinder. That may increase the useful life of the wear components. It may also reduce the amount of shavings that land on your engine.Disappointing it's not more durable. 3 stars because it's "only" $30 and did 2 swaps (2 out, 2 in), although the last install was made more challenging due to the limited ability to change the angle.
Customer
2025-05-08 17:55:14
Worked very well for my intended use's. For the price, absolutely nothing to complain about.
Cosmic industries
2025-04-27 14:16:33
Calidad precio bastante fincional
Jack Kaute
2025-03-30 11:11:17
Pulled my engine out my mx5/Miata using this. Made it very easy, although threads will need some grease for easier tilting and could do with more angle. But overall really good and useful!
SuperDad2000
2025-03-06 17:19:28
Works as it should:-)
Francisco Raul Moran
2025-01-30 13:59:47
Easy to use. Good quality. Versatile. Great value
Recommended Products
