Your cart is empty.
Your cart is empty.Product Description
WARNING! Always wear approved eye (or face)and hand protection when pressure leakage testing.
Operation
- Select the correct adapter by first measuring the hose diameter.
- Set regulator of tester to 5psi to check for large leaks with valve, open (operating handle inline with the hose axis). And with the air coupling disconnected.
- Select correct size adapters and place in hoses,then tighten the clamp
- Connect the air coupling to check for leaks at the pre-set (5psi). If a leak is identified audibly, it indicates that the system has a fault resulting in loss of pressure.
- If no leaks are evident, regulate pressure to 10psi.
- If no leaks are evident, regulate pressure to a maximum of 15psi or to the manufacturer’s maximum pressure and retest.
- If the gauge pointer remains stationary for one minute it will indicate that system works good.
- Release the pressure in the system by rotating the ball valve lever to align with hose axis.
- Disconnect the quick coupler, clean and return all items to carry case.
PB76
2025-08-23 11:19:28
Great value. Really good quality
Nicholas Kohn
2025-08-18 10:14:51
I used this on a vehicle with a boost leak and was able to easily find the leak with the help of this product. I had no idea what I was doing but with little help from forums I was able to hook this up correctly and fix the boost leak.
William Upton
2025-08-07 13:45:22
i have used this several times on my trucks and my friends it has made finding boost leaks a breeze and it’s pretty well built for the price
GDD
2025-08-01 12:41:30
This leak tester helped me locate a boost issue on my Audi A5 without paying a shop for diagnostics. Inexpensive, easy to use, nice case.... what more could you ask for? Highly recommend!
Elick
2025-05-09 11:53:30
Set works if it fits your application but it would work a lot better if the plugs were rubberized or coated with something other than plastic so they don't pop out so easily under pressure
Customer
2025-04-21 13:31:11
I’ve been building and dealing with boosted cars for many, many years. Just finished up a build, and wanted to run systems checks to ensure everything was ready for the dyno. Instead of using my home brew test kit, I decided to buy this one and see if it was worth the money. 20 PSI sent the puck flying at warp speed, directly at the top of my head (the puck was more than adequately secured), leaving me with significant blood loss and an ER trip. As someone who actually builds/works on cars: Positively do NOT buy this junk kit. On top of being plastic, there are no securing beads on any of the pucks. This is 100% a lawsuit waiting to happen, and likely another hospital trip for someone else.
Preston Cleary
2025-03-10 17:56:20
Seems like a decent product. The pressure regulator seems to bottom out at 20psi minimum, which is disappointing, but overall it functions well enough.
Julie Fredrickson
2025-02-19 13:29:55
I received it quickly.
Good !
2025-02-04 13:01:19
Good product !
Mike
2025-01-25 16:50:26
Made of plastic
Recommended Products