Your cart is empty.
Your cart is empty.The BLACK+DECKER BDCMTR Matrix Router Attachment has a spindle lock button that allows for single-wrench bit changes. Its variable speed allows for precision performance that's right for each job. This router attachment can be used with any tool in the BLACK+DECKER Matrix line including the BDEDMT and BDCDMT112.
Eric
2025-09-03 20:47:34
I recently used this to dig out a little area in my nightstand to install a qi charger and this fit the bill perfectly and had no issues. If I could gripe about one thing, it would probably be that the little opening on the sides suck to loosen and tighten the blades. I found myself reaching in with a needle nose half the time.I don't really have a workshop, since I live in an apartment. So I didn't clamp anything down, just threw on some safety googles and held that sucker down with my knee and went to town on it with this router and it did great! If you do plan on cutting out a large hole, like larger than the diameter of the base of the router, be very careful and put more weight on the edges that actually have support. I almost made the mistake of not doing that and almost ruined my project with a hole right through the board.Cleanup was pretty easy also, kept the dust pretty minimal for the amount of cutting shown in the pictures. Getting dust out of the equipment was rather easy too, obviously it's going to get into some areas that's a little trickier to get into.I know "experts" and "professionals" all hate on the black and decker brand, but I've had no issues for using it over 3-4 years so far. Except with their sander attachment, that thing was not built well at all.
James C. Morrow
2025-09-02 11:11:18
Good product!
John Gabriel Knoll
2025-08-14 17:23:44
For what it is, this is a great little tool. Although it might lack the power and possibly the control and durability (the collar is plastic and I have only had it for less than a month, so it remains to be seen how long it will last) of a standard router, this attachment works quite well. Very easy to use and the convenience of multiple tools on a single base is worth it. I have purchased multiple bits for this router attachment and have enjoyed using it to shape wood for several projects. For those without a ton of storage space for multiple dedicated tools, I would recommend the matrix and this router in particular.
ElizabethAnn
2025-08-10 14:36:48
My husband has been wanting one of these for awhile now and the price couldn't be beat. Now, this attachment is kind of a necessary for any guy who does home repairs or even like to do projects around the home.We purchased this in order to finish of a tile job in our kitchen and since then, we have also ended up using this on a chair, our bathroom and his workshop setup.The uses are kind of limitless and it gets rid of the need for multiple tools by having this attachment. It actually took quite a long time for it to arrive, so I would say to order well ahead of time so your not waiting.It's been a good quality piece for us and hasn't given us any problems. It gets the job done, and does it quickly.
Yur
2025-08-07 18:49:13
Excellent product . It worked immediately. Sent quickly. The product was new and unused.
Tim T
2025-08-06 16:16:38
This is a great little router but you must be careful. Once you install the bit which can be a little tricky and adjusting the depth this thing will chew through the wood. It's not as good as a table mounted one and can defiantly kick back so use extreme caution while using this. But all in all you won't be disappointed if you're a weekend worrier like myself. I suggest taking really small bites out of the wood. Make many passes increasing the depth each time. If you use this technique it'll be easily controlled and minimized the kick backs.
Jinxjoe
2025-07-21 14:06:46
I needed to find a set of tools that I could take to Mexico as carry-on. The Matrix line from B&D was the perfect solution. Now, I can hang doors, scrape of old paint, and cut plywood with the same ease that I have here in the US.This router, while no where near as powerful as the full size, does do an adequate of prepping door and frame. It was this or a chisle...let's just say it saved a lot of time.
RV78
2025-07-08 13:44:06
Of all the Matrix attachments I've purchased, I was most excited for the router, and the most disappointed by it. It's fine for light trim work/edging, particularly with soft woods or materials, however with a complete lack of any edge guides or the like, trying to do a straight route through a harder wood is a nightmare - most likely due to a combination of the high torque of the matrix motor and the low RPM - the router attachment is limited to 9,000 RPM (per the label on the attachment itself) which seems just plain too slow; you can definitely do a "straight" route, but you better have your wood SOLIDLY clamped down and a good two-handed grip on the drill body, because once the bits make contact, it will kick like a mule.Changing bits can also be a pain, as the plastic adjustable shroud seems to be forever at odds with the wrench and collar.I'll hang onto it for niche/quick projects, but will probably end up buying a dedicated router in the future; I can't honestly recommend it to anyone as their only router or a substitute for the real thing.
Shuwei
2025-07-07 13:22:53
The media could not be loaded.
Eric
2025-07-03 10:09:57
I recently used this to dig out a little area in my nightstand to install a qi charger and this fit the bill perfectly and had no issues. If I could gripe about one thing, it would probably be that the little opening on the sides suck to loosen and tighten the blades. I found myself reaching in with a needle nose half the time.I don't really have a workshop, since I live in an apartment. So I didn't clamp anything down, just threw on some safety googles and held that sucker down with my knee and went to town on it with this router and it did great! If you do plan on cutting out a large hole, like larger than the diameter of the base of the router, be very careful and put more weight on the edges that actually have support. I almost made the mistake of not doing that and almost ruined my project with a hole right through the board.Cleanup was pretty easy also, kept the dust pretty minimal for the amount of cutting shown in the pictures. Getting dust out of the equipment was rather easy too, obviously it's going to get into some areas that's a little trickier to get into.I know "experts" and "professionals" all hate on the black and decker brand, but I've had no issues for using it over 3-4 years so far. Except with their sander attachment, that thing was not built well at all.
James C. Morrow
2025-06-07 10:09:47
Good product!
John Gabriel Knoll
2025-06-06 11:54:51
For what it is, this is a great little tool. Although it might lack the power and possibly the control and durability (the collar is plastic and I have only had it for less than a month, so it remains to be seen how long it will last) of a standard router, this attachment works quite well. Very easy to use and the convenience of multiple tools on a single base is worth it. I have purchased multiple bits for this router attachment and have enjoyed using it to shape wood for several projects. For those without a ton of storage space for multiple dedicated tools, I would recommend the matrix and this router in particular.
ElizabethAnn
2025-05-27 16:23:55
My husband has been wanting one of these for awhile now and the price couldn't be beat. Now, this attachment is kind of a necessary for any guy who does home repairs or even like to do projects around the home.We purchased this in order to finish of a tile job in our kitchen and since then, we have also ended up using this on a chair, our bathroom and his workshop setup.The uses are kind of limitless and it gets rid of the need for multiple tools by having this attachment. It actually took quite a long time for it to arrive, so I would say to order well ahead of time so your not waiting.It's been a good quality piece for us and hasn't given us any problems. It gets the job done, and does it quickly.
Yur
2025-05-23 13:30:25
Excellent product . It worked immediately. Sent quickly. The product was new and unused.
Tim T
2025-05-19 14:43:05
This is a great little router but you must be careful. Once you install the bit which can be a little tricky and adjusting the depth this thing will chew through the wood. It's not as good as a table mounted one and can defiantly kick back so use extreme caution while using this. But all in all you won't be disappointed if you're a weekend worrier like myself. I suggest taking really small bites out of the wood. Make many passes increasing the depth each time. If you use this technique it'll be easily controlled and minimized the kick backs.
Jinxjoe
2025-05-10 11:14:10
I needed to find a set of tools that I could take to Mexico as carry-on. The Matrix line from B&D was the perfect solution. Now, I can hang doors, scrape of old paint, and cut plywood with the same ease that I have here in the US.This router, while no where near as powerful as the full size, does do an adequate of prepping door and frame. It was this or a chisle...let's just say it saved a lot of time.
RV78
2025-05-08 11:16:33
Of all the Matrix attachments I've purchased, I was most excited for the router, and the most disappointed by it. It's fine for light trim work/edging, particularly with soft woods or materials, however with a complete lack of any edge guides or the like, trying to do a straight route through a harder wood is a nightmare - most likely due to a combination of the high torque of the matrix motor and the low RPM - the router attachment is limited to 9,000 RPM (per the label on the attachment itself) which seems just plain too slow; you can definitely do a "straight" route, but you better have your wood SOLIDLY clamped down and a good two-handed grip on the drill body, because once the bits make contact, it will kick like a mule.Changing bits can also be a pain, as the plastic adjustable shroud seems to be forever at odds with the wrench and collar.I'll hang onto it for niche/quick projects, but will probably end up buying a dedicated router in the future; I can't honestly recommend it to anyone as their only router or a substitute for the real thing.
Shuwei
2025-05-07 15:34:40
The media could not be loaded.
David Muise
2025-05-03 17:56:28
I had low expectations for this. I was wrong. Used it with 1/4" round over bit for a small job - was very quick to set up and great control with the drill handle. I was routing Oak which is a hard wood and will tend to tear out end grain but I had no issues. Not a high volume tool but it gave me great results with a quick setup time. I have three "real" routers, this got the job done well with less hassle. Might be a little intimidating for those who are new to routers - practice makes perfect. I have all the matrix attachments, and I think this and the trim saw are tied for the best for me.TIP: once you have it running you can let go of the button on the router attachment. Depth of cut adjustment is really good as well.
Benjamin Aguilar Ortiz
2025-03-26 10:31:51
MagnÃfico accesorio Matrix de B&D, como la mayorÃa de los producto que fabrica esta marca.
Alexandru
2025-03-07 18:05:52
Very handy for small router jobs. The handle of the drive unit makes easy to control the router bit.
Héctor
2025-03-05 11:35:08
Funciona y muy práctico su manejo, ideal para trabajos caseros.
David Muise
2025-02-27 11:10:10
I had low expectations for this. I was wrong. Used it with 1/4" round over bit for a small job - was very quick to set up and great control with the drill handle. I was routing Oak which is a hard wood and will tend to tear out end grain but I had no issues. Not a high volume tool but it gave me great results with a quick setup time. I have three "real" routers, this got the job done well with less hassle. Might be a little intimidating for those who are new to routers - practice makes perfect. I have all the matrix attachments, and I think this and the trim saw are tied for the best for me.TIP: once you have it running you can let go of the button on the router attachment. Depth of cut adjustment is really good as well.
Benjamin Aguilar Ortiz
2025-02-25 11:41:01
MagnÃfico accesorio Matrix de B&D, como la mayorÃa de los producto que fabrica esta marca.
Alexandru
2025-01-24 16:12:49
Very handy for small router jobs. The handle of the drive unit makes easy to control the router bit.
Héctor
2025-01-16 15:08:42
Funciona y muy práctico su manejo, ideal para trabajos caseros.
Recommended Products
$129.00
$ 53 .99 $53.99