Your cart is empty.
Your cart is empty.Product Description
-
Clear LCD Screen allows you know all information:
Pairing Status, Volume, Receiver Mode(Rx) or Transmitter Mode(Tx), Bluetooth Device Name, Song, etc.
-
Quick Guide to Use the Bluetooth Audio Receiver:
- Plug the audio cable and power cable to the Bluetooth audio adapter, it will turn on.
- Make sure the adapter is not paired with other Bluetooth device. Then enable Bluetooth on your phone/tablet/TV/Laptop to pair.
- Play music wirelessly.
-
Stream music from you phone to Vintange Speaker/TV
Has Volume Buttons and Track button, so you can control all at the Bluetooth adapter!
-
Built in Microphone, Clear Hands-free Calling
Connect Bluetooth receiver to your car stereo and pair it with your phone to enjoy wireless music.
RCA & AUX In
- This Bluetooth receiver is added an RCA port and AUX port so you use a RCA or AUX cable for connection.
- Music Format: MP3/WMA/WAV/FLAC/APE
Play While Charging
- This Bluetooth Receiver is no battery inside, and it requires DC 5V power supply for power, so please keep the power connect while use.
Pratical TF Card Slot Max 32GB
- The TF card slot is very practical, don' have to pair with phone, just insert a TF card and turn on the speaker, more conevnience!
Package Content:
- Bluetooth receiver adapter: 1PCS
- RCA audio cable: 1PCS
- 3.5mm/AUX audio cable: 1PCS
- USB power cable: 1PCS
- User manual: 1PCS
BAISHUN Bluetooth Receiver
Upgrade Your Vintange Speaker to Wireless in Seconds!
The home stereo Bluetooth 5.0 adapter allows you enjoy music wireless, free form cables!
jeremy Stratman
2025-09-04 11:55:36
Actually works really well it's Bluetooth. Makes life much easier.
Carlos Ramos
2025-07-31 20:49:24
Excellent item, works as described!!
Rescue47
2025-06-24 11:09:39
The volume on this is wayyy to low.
Brian A Bohanna
2025-05-25 14:57:41
Perfect for getting am Amazon Dot to work with an old Amp..
MG
2025-04-22 17:47:29
I can't put my finger on it, but I don't love the feel of music over BT. This is my first BT receiver, so I don't have a baseline to compare to. In TF card mode, the the music is crisp, rich and vibrant in comparison. BT sound quality is OK for podcasts and background music, but I wouldn't use for HiFi.In Rx mode, the volume for both outputs is kind of low; I'd say 25% lower than other sources. I compared with the TF card in this device and my iPhone with the 1/8" headphone adapter.This receiver has a hidden volume control: long press the â® â (track) buttons.The 1/8" AUX jack is used for OUT in Rx mode and IN in Tx mode. The RCA jacks work as OUT in Rx mode, but I didn't test it as an input.This transmitter can transmit to Bluetooth-enabled *audio devices* such as sound bars and headsets. It worked with all 3 of my headsets. Make sure your device is unpaired and in pairing mode. Most devices have a "force unpair" button combo or long press. Or turn off BT on your phone to force unpair. The manual has a typo; here's what worked for me: 1) Set the switch to "TX" and double-press either of the â® â (track) buttons to call up the BT receiver list. 2) Single press the track buttons to page through the available devices. 3) Press the M button to select a device to pair to.It will try to reconnect to the last device when turned on.I couldn't get my iPhone or Mac to connect to it in Tx mode. Not sure if this is even possible.Gotchas and Details: â€¢Â âš ï¸ The bottom has two rubber strips that keep it from sliding around. Be sure to peel off the plastic covering these! • No battery. Must be powered by a USB power supply (not included). They recommend not powering form a hub/computer. • macOS and iOS don't set the volume of this transmitter. Volume works like Android where each device has a separate volume control. • Cannot seek within tracks • The TF card eject is forceful — careful that you don't lose your card • The USB power cable cannot be reused as a data cable • The USB-C jack doesn't support data • The TF player cannot play AAC files (DRM or no-DRM) • Every MP3 on the card is played as one long list, you can't navigate a large library • Sometimes, MP3 track names are displayed in truncated 8 letter DOS format (ABCDEF~1.mp3). • Wouldn't recognize my 512GB ExFat MicroSD card. Worked with my 8 GB FAT32 MicroSD card.Could be improved: • Higher resolution display or smaller typeface for track names • Black on black controls are difficult to read without bright light • Support thumbdrives via USB • Add TOSLINK input for Tx from TV to a BT headset
Edwin Rivera
2025-04-04 12:30:50
Works well.
Fstoppr554
2025-03-07 14:22:59
Garbage. Doesn't stay connected, and sounds terrible…a ton of distortion for some reason, even at low levels. However, I shouldn't be surprised for what this thing costs… Save your money.
ADK Frank
2025-02-17 13:48:50
Easy plug and play used to connect an old Logitech 2.1 speaker for work. I bought a second one for future use. :-)
Recommended Products
$99.00
$ 45 .99 $45.99