Your cart is empty.
Your cart is empty.Product Description
Integrated Spring Design
- Spring design, high toughness return spring, automatically open the handle after shearing, easy and fast operation, improve work efficiency.
- Don't worry about spring easy to falling.
Safety Lock
- Turn the safety lock switch to protect the edge.
- Close the safety buckle when you not in use,and don't worry about hurting your hands or body.
Blackening Process
- Anti-rust,anti-corrosion blackened surface, practical and generous.
- The surface of the clamp head is finely polished and coated with anti-rust oil.
Comfortable Handle
- PVC coated handle, anti-skid and wear-resistant, comfortable grip.
- Combined with ergonomic design,which provides a comfortable grip and does not feel tired after working for a long time.
Sam Keller
2025-08-23 16:04:17
These work real well I think they're probably better than Kleins? Lets see if they last longer then the last pair of Kleins I bought at Home Depot they didn't even last a year? I've never heard of this brand before but they look like they're Built Well and so far they worked really well
David Fittin
2025-08-20 14:15:21
Excellent wire cutters. Does the job!
Hawk eye
2025-05-10 17:00:00
This was another "bought on other customers' word" purchase, and I'm happy to say my fellow reviewers here steered me right again!I run two 3D printers as a tinkerer and hobbyist, so I handle 3D printer filament often. For a few reasons I won't elaborate on here, since I'll carry off on tangents, I do need to snip a piece of filament regularly.I bought a set of Stanley pliers, and I've had to heavily sharpen the jaws of the diagonal cutters that were in the set to make them of much use, but I use those for electronic wire clipping.I bought another set of pliers from Harbor Freight tools, and I got what I paid for..... The cutting edges were WAY out of alignment, to the point they're nearly unusable as cutters. But to my sudden surprise, I discovered they work really well for removing melted filament off my printer's nozzles!! So I didn't take them back to the store. But I wanted some SHARP cutters to cleanly cut, not crush, my 3D printer filaments.Again, I bought these based on reviews, and these work fantastically for my purpose! These pliers are startlingly sharp! I've been using them constantly in the few weeks I've had them and have always been impressed.While I haven't used these to cut any harder materials (like small bolts or screws) I do agree with other reviewers that doing so would wear these pliers out really quickly. The jaws on these pliers are literally sharpened like scissor blades, so they shear material like scissors do, rather than crush-shear materials like diagonal cutting pliers usually do.If you're needing a good set of diagonal cutting pliers to cut hard material, these may not be for you. But if you need really sharp pliers to cut softer materials, these are worth checking out!
bmerobert
2025-04-29 13:33:53
these are good needed to replace my 40-year-old ones which were not cutting so well.
Debby T.
2025-04-08 17:26:39
I needed a tool like this that would cut thin metal effectively, relatively easily because I have arthritic hands, and remain sharp enough for a reasonable number of cuts. I had a cutting tool that I had to sharpen several times during one sitting. This tool is outstanding to me because it has met and continues to meet all of my criteria. The point is very sharp, also, and has come in handy to cut into small spaces. I most highly recommend it.
eng_steve
2025-04-06 16:05:53
I needed some small wire cutters for cutting mostly hard plastic zip ties. I have had the really small ones for soft wire which actually break eventuall if you cut hard plastic ties. I also have some really large ones for cuttin wire and coax cables but these are perfect for not straining your hands while cutting the ties. Good product.
Oleksandr Kotenko
2025-03-22 14:29:29
With just one pair of cutters, you can cut coaxial cable daily for a whole month without stopping. Excellent price-to-quality ratio. After a month of heavy use, they start to dull.
Cathy
2025-03-16 11:54:40
The ones I got were all dirty, they were scratched up and half of the package was missing. I think I got someone’s return. They work fine but the description said “heavy duty†they are not very heavy duty if they can’t cut through a piece of 1/32†wire that I am using to make a grape trellis with. They do cut it but if that’s the best performance they have they are far from heavy duty! I am just a little ticked because I got used ones, in a used wrapper that was dirty and half missing!Update to add: Their customer service reached out to me and asked what they could do to help fix the problem. They sent me brand new ones to replace the dirty scraped up used pair that I had gotten originally. At least they are new and not used this time. I have not used the new ones yet since I have been working out of town for a week. I will resume working on my berry trellis this week and see how the new pair works. I increased the stars by one because their customer serviced people were efficient and the new ones shipped to me as quickly as they could. Good customer service is rare these days!
Customer
2025-03-12 15:35:55
It was way too small for my finger to use comfortable.
T.G.C.
2025-02-10 09:28:38
Can not cut through 32 or 28 gauge cleanly
zzz
2025-01-24 11:23:37
poorly packed and oily coated
Recommended Products