Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
Paul S.
2025-08-29 10:35:54
Works very easily and well made.
Rod Walker
2025-08-13 10:02:18
I need a special diet tap for one job I had ,works great wood by again.
Doug Sather in W.Va.
2025-07-08 18:40:13
Couldn't even use the die, I threw it away and got one from McMaster Carr
Blaine Little
2025-07-05 15:11:13
I only use this occasionally in my hobby. Price for product it suits my needs very well.
Monica Hooker
2025-04-20 11:58:02
I look all over for a 1 16 tap to clean the threads on my surface grinder wheel hubs. They were filled up with grinder grit and after years of spinning and packing into the threads? What a bastard! It work good and the bounce was the 1†+ 16 die that comes with the tap. Quality seems ok, but I never cut any fresh threads with. Honestly I do believe it would do ok.
Rob Quartermain
2025-01-08 16:50:01
Would not recommend
Recommended Products