Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
Tom
2025-07-21 11:31:50
Worked on hard steel without fail , super sharp extreme quality and durable easy to use and got the job done faster than ever!
Scamed
2025-06-23 15:17:24
I needed it to retread my brinley hitch. It worked great
Charlie Dawson
2025-06-14 12:06:54
good value
Jon L
2025-05-14 14:38:42
Fast shipping, does what it is supposed to. Die had a little rust on it when it arrived.
Bruce S
2025-05-03 14:41:24
Worked well
Ralph Counts
2025-04-04 14:28:39
This tap and die set worked well to clean up threads on a slide hammer. I had neglected to remove my attachment from the slide hammer after tacking a coupling nut into place on the attachment, and I could just barely remove the coupling nut from the slide hammer - But this tap and die set restored the threads to working status. And now my slide hammer is back to like new condition.
Florida Al
2025-03-25 21:42:06
Welded a home-built nut splitter together to remove a large, frozen nut on a large, splined shaft. The threads of everything on my new device were splattered with BBs from the welding. I used a generous amount of cutting fluid and was easily, but slowly in and out a bit at a time, able to get everything cleaned and threading smoothly. It worked better than I was expecting based solely on the price. I inspected it after using and everything still looks like new. I'll buy more Burkit taps & dies of different sizes as needed. Very impressed.
Studem Business Inc.
2025-02-12 12:47:15
Súper cool
mario girard
2025-02-05 13:32:59
Parfait
Chris
2025-01-30 10:58:23
Did the job as required
Recommended Products