Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
Excellent service and performance
2025-08-24 12:50:39
Product exceeded expectations. Fast delivery and excellent performance product.
John W.
2025-08-15 10:56:22
I use this to chase single point threaded gun barrels after they come off the lathe. Cuts well, threads within tolerance, cleans up my work well
Jim
2025-08-13 12:31:14
good quality
CraftyLife
2025-07-22 12:58:16
Good buy. Got the job done.
Jimbo
2025-06-04 18:25:36
Another good tap and die set from this company. Clean threads after repeated use
Dave
2025-05-27 17:27:22
I used the die to clean damaged threads on the 1969 Chevelle steering column post that I am restoring. Careful placement of the die on the post and some patience enabled nice success. I'm very happy with the performance of this item.
Customer
2025-05-23 17:19:09
I am a member of the Veterans Honor Guard and one of our M1 Garands launched the blank adapter followed by the gas assist tube from the end of the barrel. The information online said the threads on the barrel were 9/16-36 UN. I ordered these and they fit. I was able to clean/chase the threads on the barrel and blank adapter. Assembled and everthing tightened up. (I did use a different blank adapter for those familiar with the M1)
Jonathan Castle
2025-04-04 16:45:53
Cuts through the old threads and makes new ones easily. Good solid tool.
Dirk Fuchtmann
2025-03-19 21:00:05
Ich bin nur Gelegenheitsschrauber. Dafür ist das Werkzeug optimal. Stabil und gut verpackt, des Weiteren mit einer guten Kennzeichnung versehen.
Massimo Duci
2025-03-09 16:13:03
top product and good price
New fm I hope
2024-11-18 11:33:57
A simple but beautiful kid with many different parts absolutely essential for anyone working with screws, nuts bolts washers and any mechanical sort very well-made and very effective. I have used this often.
Recommended Products