Your cart is empty.
Your cart is empty.Product Description
Information
Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage. Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
Straight Flute Thread Taps
Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow blind holes.
Easy to Use
Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
Coatings
Features just the base substrate without any additional coatings, suitable for wide ranges of applications.
High Speed Steel Taps
- High hardness and strength, good toughness
- Good wear resistance and heat resistance.
- Good process performance.
- Perfect for drilling and tapping aluminum, zinc, alloy etc..
kevin goudy
2025-08-24 17:55:54
This tap or these as there are two came in on time were shipped on time and were exactly what in needed. These are the size of my license plate bolts on my Sequoia and some had put the wrong bolts in before. I took the bolts out and used the tap and in minutes my plate fit on snug like it should.awesome value they are very inexpensive and easy to use. They are durable and the tip is sharp enough that it is self tapping. They are just as the pictures made them appear. They look great and work well.
Cody Honaker
2025-08-15 14:46:07
Powdercoated the gas cap and the threads got a bit in, had to get this to save the threads and worked flawlessly. Great price and will Dave for the next odd ball job
Steve M.
2025-08-06 15:44:02
No problem with these taps at all.
bleys2112
2025-07-07 11:47:49
Nice little taps... Good and sharp! I bought the two pack because I was cutting threads in 1/4" aircraft aluminium and was worried I might break one. Twenty holes later and the last hole cut as easy as the first! I'm very satisfied with the purchase. Just go slow and work em back and forth to keep the cuttings clear and you'll have no troubles at all.
Wiseguy59
2025-06-02 15:53:51
For the few times I'll use these taps, they will do the job.
david kenyon
2025-05-17 19:02:11
Great
Customer
2025-02-04 11:54:05
Seems to be a quality product and delivered on time.
George Spafford
2025-01-24 14:35:36
I busted a tap late on a Thursday night and had to get replacements in a rush. Amazon could have them to me on Saturday. Problem solved. I tapped the holes I needed with these and was able to finish up. I only did a handfull of holes - about 1/4" thick machine steel - and these worked. I've used other Uxcell stuff in the past as well.
Lorry Lynn
2025-01-13 11:46:14
Easy peasy
Recommended Products