Your cart is empty.
Your cart is empty.Works on All Roofs for Buses, RV's and Trailers. This product is designed to be applied to a wide range of roofing materials, including metal, fiberglass, rubber, PVC and DICOR Roofs as well as other types commonly used in the construction of these vehicles. BUS-KOTE is a high-performance RV roof coating that is specially formulated to withstand the harsh conditions that buses, RVs, and trailers are exposed to on a daily basis. APPLICATION PROCEDURE: Stir well before using. Do not thin, use product as is. Mix multiple containers of color together for greater color consistency. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approximately 2 to 4 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush, roller or spray. Spread coating uniformly. Spread Rate will vary depending on surface. Apply at 12 to 16 mils wet film thickness per coat. Wait at least 12 hours between coats
Thomas R. Pelley
2025-07-13 10:05:27
I put 4 coats on the roof of my Airstream trailer. Each coat made the trailer quieter.Each coat seemed to make this tin can feel better, heat wise. I used one gallon, applying with a brush. My roller wouldn’t work on this.After 20 years, this trailer is warmer and quieter than ever.I really couldn’t be more pleased!I recommend their primer as well.Edit: In -5 degrees Fahrenheit, my poor little trailer did way better than it used to!Amazing stuff!
Justin A.
2025-06-24 17:58:27
worked good no issues, will look into using an sprayer next time as did not level out as much i would have liked; but that also not a horrible thing as provides a "non-skid" to the roof so is not as slippery as before.
B Rabbit
2025-01-25 17:37:48
Used on 35x8 rv roof that is 15 years old with busprime, went on easy and already cooler inside! Ready for a roadtrip
Recommended Products
