Your cart is empty.
Your cart is empty.Product Description
Camco 07723 Thermostat (Lower) - Apcom Style (E/F/S)
From the Manufacturer
Lower Thermostat 07723.
anthony chandler
September 5, 2025
Works just like it should easy to install
stuart b
August 28, 2025
Was having trouble maintaining hot water in a 50 gallon tank. Replaced both the upper and lower elements due to the lower element being shorted out due to corrosion. A couple of weeks later, was running out of hot water again. Checked both thermostats and the lower one was bad. Decided to go ahead and replace both thermostats. Installation was a snap and both thermostats are better than the "universal fit" sold at the big box stores. In short, plenty of hot water and noticed a significant drop in utility bill.
Rusted Junk Garage
August 18, 2025
Package says made in USA, easy install if you are comfortable working around electrical components.
a-username
August 13, 2025
Works as intended, exact fit as the original.
George J. Texter
August 10, 2025
Product was great , however was delivered behind my deck on the firewood pile , far away from the door , I wasn't happy about that
Craig T
August 9, 2025
When my water heater is going crazy (either too hot or too cool), and it is not dripping (leaking), this simple fix is quick, cheap, easy, and effective. I keep a spare on hand, since appliances tend to fail on weekends or just before house guests arrive.
Slick 65
August 4, 2025
My hot water heater was overheating and tripping out. I ordered the exact same replacement to ensure proper fit and it was the answer to my problem. I replaced both top and bottom thermostats at the same time. One may have been good but for the price it was the thing to do.
Bill
August 2, 2025
My Reliant water heater quit working and after inspecting it I found out the lower thermostat has burn out. This thermostat looked exactly like the burnt one and according to the description it was compatible with this model. I was pleasantly surprised it also came with the little white plastic cover to separate the cap fiber insulation from the thermostat. Installing it was very easy, the little metal tabs on it clicked in the slots and locked it firmly in place. I reset the upper thermostat, which had tripped when the other one burned, and now everything is working again.
Richard N.
July 18, 2025
By looking at the picture, I used it for A.O Smith hot water tank. It attached to the tank by the side hooks and holding very well as the original thermostat . Worked perfectly … Happy camper .
Mountain Man
July 3, 2025
Arrived quick, and matching exact the description, appears good quality! Recommend!
chantal
July 1, 2025
Pour un chauffe eau
D.M.
June 22, 2025
works well
D. McMichael
May 24, 2025
Works good, old one after 6.5 years would stay on and not turn off at set temp.
anthony chandler
May 16, 2025
Works just like it should easy to install
stuart b
April 22, 2025
Was having trouble maintaining hot water in a 50 gallon tank. Replaced both the upper and lower elements due to the lower element being shorted out due to corrosion. A couple of weeks later, was running out of hot water again. Checked both thermostats and the lower one was bad. Decided to go ahead and replace both thermostats. Installation was a snap and both thermostats are better than the "universal fit" sold at the big box stores. In short, plenty of hot water and noticed a significant drop in utility bill.
Rusted Junk Garage
April 10, 2025
Package says made in USA, easy install if you are comfortable working around electrical components.
a-username
April 6, 2025
Works as intended, exact fit as the original.
George J. Texter
April 5, 2025
Product was great , however was delivered behind my deck on the firewood pile , far away from the door , I wasn't happy about that
Craig T
March 22, 2025
When my water heater is going crazy (either too hot or too cool), and it is not dripping (leaking), this simple fix is quick, cheap, easy, and effective. I keep a spare on hand, since appliances tend to fail on weekends or just before house guests arrive.
Slick 65
March 6, 2025
My hot water heater was overheating and tripping out. I ordered the exact same replacement to ensure proper fit and it was the answer to my problem. I replaced both top and bottom thermostats at the same time. One may have been good but for the price it was the thing to do.
Bill
February 15, 2025
My Reliant water heater quit working and after inspecting it I found out the lower thermostat has burn out. This thermostat looked exactly like the burnt one and according to the description it was compatible with this model. I was pleasantly surprised it also came with the little white plastic cover to separate the cap fiber insulation from the thermostat. Installing it was very easy, the little metal tabs on it clicked in the slots and locked it firmly in place. I reset the upper thermostat, which had tripped when the other one burned, and now everything is working again.
Richard N.
February 9, 2025
By looking at the picture, I used it for A.O Smith hot water tank. It attached to the tank by the side hooks and holding very well as the original thermostat . Worked perfectly … Happy camper .
Mountain Man
January 27, 2025
Arrived quick, and matching exact the description, appears good quality! Recommend!
chantal
January 20, 2025
Pour un chauffe eau
D.M.
December 24, 2024
works well
D. McMichael
December 19, 2024
Works good, old one after 6.5 years would stay on and not turn off at set temp.
Recommended Products
