Your cart is empty.
Your cart is empty.Product Description
AODELAN PEBBLE wireless remote shutter release. Support autofocus, single shooting,continuous shooting,high speed continuous shooting, BULB shooting,delay release of 3s shooting.Wireless and wired operations. Reduce camera shake and allows you to trigger your camera wirelessly up to 262ft/80 m.
Wired and wireless
The transmitter can control the receiver wirelessly to perform autofocus, single shot, delayed release of 3s and continuous release;
The receiver can also be used as a wired shutter remote to do autofocus, single shot, continuous release.
Reduce camera shake
Use the AODELAN PEBBLE wireless remote shutter release to reduce camera shake and take clearer photos.
In single shoting mode. Press the shutter button on the transmitter to trigger the camera.(Half press to auto-focus, fully press to take photo)
Continuous shooting
1. Set the camera to continuous shot mode.
2. Press and hold the shutter button on transmitter until the indicator turns off, and then let go off the button. The camera will perform continuous shooting.
3. To end the continuous shooting, press the shutter button on transmitter.
3 seconds delay shooting
1. Put camera in Single shooting mode;
2. Press the 3s delay button on the transmitter to trigger the camera.
Bulb shooting
1. Set the camera to BULB mode.
2. Keeping press the shutter button on transmitter for seconds, and then let go off the button. The camera will perform BULB shooting.
3. To end the exposure time, press the shutter button on transmitter.
Christine Wilson
2025-08-30 13:56:43
I was blown away by how easy this was:• install batteries• use the cord to connect the transmitter to your camera• press the power button on both• press the button on either one to take a picture!No programming or set up needed. It just worked right away on my Canon Rebel T7. you do need to provide two AAA batteries, but it comes with the needed button battery for the remote.
Photo Cut Pro
2025-08-23 12:43:44
Item worked flawlessly, great value, no special batteries needed.
Tia
2025-07-23 15:49:25
This is the first time I’ve bought a remote for my Canon T7. And I can confirm, IT WORKS! I saw some reviews that said it didn't, but it worked right out of the box for me. Easy set up and fast response from the remote to my camera. I like that it’s small enough to hide in your hand too. I’m a Photographer and I’ll definitely be using this for our Family photos coming up. Best remote ever!
Tia
2025-06-30 19:16:12
Â
Dave H
2025-06-25 16:53:37
I originally bought this remote shutter for my Nikon D850 in Nov. 2022 for astroimaging. It was easy to use right away and worked great. Frankly, I did not use it that often, perhaps 15 times. In Feb. 2024 (Last night), it would not work, then it would, and sometimes it would trip the shutter without me telling it to. I changed batteries; had to re-learn what to expect from the LED lights to see if they seemed to be working correctly, tried the relinking process between transmitter and receiver. I finally figured out today that the issue is the cable. If I manipulate the cable in a specific way, it would work reliably (although kludgy approach to keep the cord twisted in the needed position). Original cost, about $38. New cable about $10. I plan to be a bit more careful on how I handle the new cable, hopefully it will last longer.
Jim J
2025-06-16 13:32:46
I bought one of these to use with my Nikon D 7500 while taking pictures with a long lens and camera mounted on a tripod. I wanted to reduce camera shake while taking picture of birds and also when doing night photography with a 500 mm lens. The device comes with two cables, a 10 pin round cable and a square cable that fits my Nikon. The other end as a round 2.5mm plug that fits into the receiver. The receiver can mount on the hot shoe of your camera or can be mounted elsewhere using the 1/4 - 20 tripod mount the spiral cable allows you to orient it away fro the camera. Be careful to make sure the cable and the wrist strap are arranged so as not to interfere with the operation of your camera.Before mounting the receiver on your hot shoe, plug the round 2.5 mm plug into the receiver. I found I had to push it in firmly to get it engaged. That is not something you want to do while the receiver is on the camera because the hot shoe mount is only made of plastic and you could break it off easily. Plug the other end into your camera being careful to observe the orientation. The camera plug is marked to make this easier but you might want to put a spot of white paint on it to make it even easier, especially in low light.Turn on the receiver by pressing the on/off switch. There is a green LED that blinks to let you know it is on, If your situation requires total darkness, put some tape over the LED. Turn on the camera and the remote should operate, The receiver has a button to trigger the shutter. A half press focuses the lens and a full press takes the picture. Push and hold to take a burst of pictures. You can also use the small remote to trigger the camera. The smaller remote includes a second button that gives you a 2 second delay, This is useful for self portraits in case you were looking at a monitor, it gives you time to focus back on the camera lens.When I have a chance to check the range of operation, I will append the results to this review.I think this device is a good value overall for my needs. The durability is probably not going to be enough for a professional photographer but it is a value priced option for us amateurs.
ERNALYN MONTGOMERY
2025-05-30 12:20:42
Did not work with my Sony or Nikon. I thought I tried everything. New batteries, double check instructions. Still nothing. Sent back
milanmilanlobo
2025-04-28 14:55:40
Super lightweight and does what it needs to get the job done. Affordable and not hard to set up. Took about 2 minutes or less to set it up and I didn’t need instructions to help. It’s that simple. Works well with my canon eos r6 mark ii! Shutter speed is perfect. Took tones of pictures!
Customer
2025-04-26 11:15:29
se conecta y listo, muy bueno y muy funcional
Steve M.
2025-02-22 17:50:59
I have a Nikon D5600 and can I confirm that these remotes work perfectly. You can use either the transmitter or the receiver to take your photos without ever having to touch the camera. It even works in Bulb (Raw) mode for astrophotography. Great price, great product.
Mel
2025-02-21 12:54:27
I love this remote. I use it all the time and it works great. Very easy to use
Brisbane, Australia
2025-02-03 12:42:40
I like the item, Not complicated, Easy to Install and easy to Use.
Rafa
2025-01-26 17:46:44
Llego a tiempo, muy buena calidad, el precio es muy bueno, funciona perfectamente con mis cámaras Canon 7D y EOS R.
Recommended Products