Your cart is empty.
Your cart is empty.Part Number: 11AC4FAKR Pressure Settings: 135 -165 PSI Manifold Type: 1/4" NPT, 4-port Unloader Type: EV*WSi (90° 1/4" QC) Strain Relief Left: None Strain Relief Right: None
terry warner
2025-08-27 14:19:51
Make sure you are looking at the inside tag for your exact replacement. It worked perfectly; however, the preset cutout was set way to high and needed to be adjusted down. So be ready that first time you turn it on after replacement. Plan on changing the gauge and pop off at the same time.
Roxanne Lopez
2025-07-20 14:38:30
Switch very ez to install and works perfect. If you're replacing the old switch, this one is it!
JAY F.
2025-06-18 11:58:54
This happens to fit on a stock Chicago Electric vertical 5 hp 2 stage compressor. The first one had the points fry out. The points in these things are not very hardened , so they only have a 125 duty cycle (per the paperwork That comes with the switch) , So that means after 125 cycles of your compressor starting and stopping , it's pretty much worn out. My old one (identical) made through one paint job and then quit a month later when filling a tire. You might try and modify a better quality pressure switch for your compressor before using this model. FYI
Gary
2025-06-08 16:18:16
Exact replacement, easy to install,works great.
locaste
2025-05-20 17:27:20
Worked perfectly, OE valve on my Central Pneumatic 5hp 60 gallon 2-stage compressor. I was unaware of the self captive nature of the pressure unloading fitting of this device.
Joel
2025-04-27 15:35:11
perfect fit
Customer
2025-04-09 11:29:54
I called for help to make an adjustment 2 days ago and still waiting on call back. I have called back twice more and still no response.
robert worsham
2024-11-29 17:53:12
Exact replacement works as it should
Recommended Products
