Your cart is empty.
Your cart is empty. Cooler Master i30 CPU Cooler is a low noise cooler. The cooler contains a silent 92mm fan with an appropriate premium aluminum heat sink.
With a compact size and a height of just 55mm ,it is especially designed for small chassis.
Compatible with Intel CPU Socket LGA 1150/1151/1155/1156
Features:
- Compatible Intel CPU Socket LGA 1150/1151/1155/1156
- 60MM Height
Specifications:
Dimensions(mm) :
Heatsink Size: 95 x 95 x 55mm (3.7 x 3.7 x 2.2 inch)
Fan Size: 92 x 92 x 25mm (3.6 x 3.6 x 1.0 inch)
Rated Voltage : DC 12V
Noise Level: 28±3 dBA
Fan Speed: 2600 RPM±10%
Thermal Compound: pre-pasted
Package and Contents:
1 x CPU Cooler
1 x Mounting Bracket
Item in retail packaging.
Ship in well protected packing.
lyricos
2025-08-18 17:42:43
For context, I have been working with a circa 2019 Dell Inspiron 3670 mini tower desktop with the goal of running Microsoft Flight Simulator 2020 in VR mode with an Oculus Quest 2. The starting configuration was a disaster in that regard, but after some upgrades (NVIDIA GeForce GTX 1650 Super, 32 GB RAM, NVMe SSD, USB-C 3.1 card, Core I7-9700F processor), I thought I had the system whipped into shape. Until I tried a daylight overflight of Manhattan in a Diamond DV20 Katana (don't do that IRL, by the way), the system got super busy for 15 minutes straight, and the temperature spiked up to 90 degrees C, whereupon thermal throttling kicked in and my flight ended very badly indeed.After some research, I decided to try the i70c as a drop-in replacement for the stock Dell CPU cooler. The reason I chose that particular model is that it was the only option available with a 4-pin PWM connection and had the screws needed to attach to the stock Dell backplate already installed on the motherboard. It truly was a drop-in replacement - the screws fit perfectly, the pinout on the PWM connector was a match to the motherboard, the BIOS recognized it without a hiccup, and even at full throttle MSFS for over an hour, kept the CPU temperature at or below 85 degrees C, which was exactly what I needed. By the way, I did remove the stock thermal paste that came with the cooler and used Thermal Grizzly Kryonaut instead - it might not make that much difference but I prefer that brand.The only reason I didn't give it five stars across the board is that it does produce a noticeable amount of fan noise under load - I haven't measured it but would estimate 45-50 dB, dead quiet by gaming system standards but still a bit noisier than your average desktop. Small price to pay for a capable MSFS rig.Bottom line - if you own a recent model Dell and need a cooler upgrade, don't believe the rubbish you see on Google about fan incompatibility and definitely ignore the YouTube videos suggesting hacksaw-required mods to your case to shoehorn a ridiculously large cooler that will probably break your motherboard in two. Pay attention to your cooler fan pinout and backplate, get this, and you won't be disappointed.
Dusty
2025-08-15 18:42:52
Got this cooler for an older i7(LGA1150) build I cobbled together for a makeshift home server. Works great, keeps it cool and quiet under a moderate load. Very good affordable CPU air cooler that has good compatibility.
Customer
2025-08-02 14:55:06
A++++++++Quality fanWorks as designedLooks great and it is very quiet !!!!
erogger
2025-07-03 19:18:24
Read great reviews all over the place for the Cooler Master I70C. Chose this one over the regular I70 cooler since it has a copper insert for even better heat transfer.Was hoping I could use it on my prebuilt aging desktop to improve temps while gaming. Screws lined up perfectly and I gently tightened them in diagonal order to ease it onto the CPU. Booted up just fine, but before I could even think about running Prime95 as a stresstest I noticed temp at 100C. Turned it off, removed and reset the cooler, same story. Removed a second time, took a closer look. Unfortunately while the screws line up, they are slightly taller on the Cooler Master and thus the cooler doesn't make solid contact with the CPU. Only solution would have been to install the Cooler Master supplied backplate. Unfortunately my prebuilt case would have required completely taken apart, unscrew the mobo, install the backplate and reinstall everything. Sorry, but that's just too much hassle.Wish CM had made the screws just about a 1/8" shorter and it would have been an easy, perfect fit! Too bad.
Badgers badgering
2025-06-10 18:46:02
Like stated in the title, i feel that its better secured on to the motherboard than the aging original heatsink's and fans that came with the CPU's that apply to this socket and for sure keeps it better cooled. But it's kind of loud and I will be replacing it when I find something better. It's fine for the time being but I think I will use it on a system where the computer doesn't have to be around people.
Josh Carr
2025-06-04 16:38:44
Works as intended, I recommend redoing the thermal paste but does work the way it comes.
Redha kadhem
2025-05-14 15:50:55
منتج مابي اقوله ان سيء بس بالمرة ماينÙع للمعالجات المتوسطة لان Øرارتهم ترتÙع بقوه المروØØ© ماتقدر تتØمل المعالج ابرد درجة توصلها ٦٠بدون ماتشغل شي!! اذ شغلت لعبة او برنامج ثقيل ع المعالج طبيعي تشو٠الØرارة ٠التسعينات ÙˆØيل طبيعي ١٠٠لاتخاÙ
ã˜ã‚…ã‚“ã‚„
2025-05-04 17:36:05
大袈裟ã«ãƒ‡ã‚«ã‚¤ã®ã‚’付ã‘ã‚Œã°ãりゃ冷ãˆã‚‹ã‚ˆãã ã‘ã©ã‚ªãƒ¼ãƒãƒ¼ã‚¯ãƒãƒƒã‚¯ã™ã‚‹è¨³ã§ã‚‚温度弄る訳ã§ã‚‚ãªãCPUã®ã‚ªãƒžã‚±ã§ã¤ã„ã¦ãるアレよりã¯é™éŸ³ã§è‰¯ã„物ã£ã¦ã®ã§ã‚³ãƒ¬ã€‚3世代å‰ã®éª¨ã¨ã†å“ï½—ã ã‹ã‚‰ã‹ä¸å›½ã‹ã‚‰å±Šã„ãŸã‘ã©ã¡ã‚ƒã‚“ã¨æœªé–‹å°æ–°å“ã§å®‰å¿ƒã—ãŸã€‚付属グリスã¯ãµãå–ã£ã¦MX4。åŒæ¡ä»¶ã§Intelオマケより3～4℃下ãŒã£ã¦éŸ³ã‚‚é™ã‹ã€‚大満足。
Steven
2025-05-03 10:58:01
Super easy to install, very quite, and does the job!
Abdullah A.
2025-03-22 10:54:40
Easy to install
JV
2025-01-06 11:00:20
Apart from being a regular CPU fan, this product does the job well! Not recommended for higher end cpu's but low budget builds, especially for Low end intel cpu's. This fan will do the job and IS better than the CPU fan that comes with intel CPUs
Recommended Products
