Shopping Cart

Your cart is empty.

Your cart is empty.

Corona C4SF 2.4G Receiver 4CH Plashproof S-FHSS HV Receiver Compatible with Futaba SBUS 3PV 4PLS 4PV 4PX 7PX

4.4 (8) Write Review
Free shipping on orders over $29.99

$24.99

$ 11 .99 $11.99

In Stock
  • Product Name: CORONA C4SF 2.4G HV Receiver.
  • 4ch servo channels in C4SF-HV under normal status.
  • S.BUS output support expanding servo channels on the 4th channel of C4SF-HV under special status.
  • It has waterproof function.


Product Description

  • Corona C4SF 2.4G Receiver Plashproof S-FHSS HV Receiver 4CH Compatible for Futaba SBUS 3PV 4PLS 4PV 7PX 4PX etc.
  • Compatibility:
  • CORONA 2.4GHz S-FHSS/FHSS Compatible Receiver is designed for FUTABA S-FHSS/FHSS 2.4GHz transmitters; such as air system T4YF,T6J,T6K,T8J,T10J,T14SG,T18MZ,T18SZ or surface system 3PL,T3PRKA,4PLS,T4PX,T4GRS under S-FHSS/FHSS protocol mode.
  • Feature:
  • 4ch servo channels inC4SF-HV under normal status.
  • S.BUS output support expanding servo channels on the 4th channel of C4SF-HV under special status.

  • Specifications:
  • Voltage Range :3.6~8.5V
  • Operating Current:60mA max and 45mA under linked
  • Operation temperature: -10~70 degC
  • Latency:13.6mS or 20.4mS
  • Sensitivity: about-95dBm for C4SF-HV
  • Weight:6.2g for C4SF-HV
  • Latency:7mS ~ 16mS
  • Bind procedure:
  • Turn on the S-FHSS/FHSS transmitter, leave it 0.5M~1M away the receiver.
  • Connect the battery to the receiver while pressing receiver’s F/S button.
  • Red LED light on and Green LED off when searching signals, and turn to Green LED light on and Red LED off indicate bind is succeeded.
  • Fail-safe setting:
  • C4SF-HV set Failsafe on the S-FHSS/FHSS transmitter just like the operation for FUTABA receivers if the feature exist. We highly recommend you set Failsafe feature while driving your models. An example of a useful Failsafe setting would be to shut down the model’s throttle, so that it does not fly or drive away uncontrolled.

  • Special/Normal mode switch guide:
  • If your receiver has been linked with your transmitter, please power off your transmitter. When your receiver’s LED light red, push down and hold the button on your receiver for more than 6 seconds and not more than 10 seconds, release the button to see the green led flash, push down the button again right now, receiver get back to light red. Now the MODE status has changed between Special mode and Normal mode. When green led flash low indicate normal mode to special mode, and green led flash fast indicate special mode to normal mode.
  • Under the special mode status, you can get S.BUS output feature on thethe 4th channel of servo channel, other channels not changed.
  • NOTE: if you want to reset the receiver to normal mode, you can rebind the receiver to your transmitter.
  • Servo selection guide:
  • If you want to take analog servos on the model, please take normal mode.
Corona C4SF 2.4G Receiver Plashproof S-FHSS HV Receiver 4CH Compatible for Futaba

R. Kester
2025-08-15 12:44:54
I am using this receiver with a Futaba 3PV transmitter, and it just bound right away when I followed the instructions. It works really well on my 10th scale crawler and once you get the settings in the transmitter configured, it works a treat.It offers 4 channels, plus a 5th channel for SBus or power for those who want or need that function. I am using it for a few sets of lights on my crawler, but am hoping to add a 2speed and be able to really take full advantage of the 3rd channel.I also do rwd drift and this would be perfect there as well.
Customer
2025-07-24 09:52:20
Less than half the price of a F radio receiver and works the same.
Customer
2025-07-23 14:10:12
I’ve purchased quite a few of these and mainly run them in my Tamiya’s as an alternative over the Futaba branded receivers. They work just as good as the Futaba 3 channels that I normally run in my more expensive rigs and have yet to have an issue with binding or range. You can buy 2 of these for the price of 1 Futaba so it’s definitely a value. Buy with confidence as they work great with any Futaba transmitter.
Matt
2025-07-15 12:58:53
Works great, Binds easily and No ridiculous futaba price. Little bit larger footprint than the Futaba receiver but nothing to worry about. Buy it, you’ll be happy or buy three for the price of one futaba and be happier!!
Dude
2025-07-11 13:39:44
Dead on arrival, would never power on.
Anthony Q.
2025-06-23 17:01:07
Works great on Futaba transmitter and binds with no problem
S. Turner
2025-04-29 17:45:50
I now have bought 4 paired with my 3pv and and they all work perfectly. Easy to pair and fraction of the cost of Futuba receivers.
Nick Cook
2025-02-11 14:56:58
This item works great with lower voltage ranges but once you push above 7v it looses ability to run bigger servos like the reefs 500 ect. You will end up getting massive glitching and short brownouts.