Shopping Cart

Your cart is empty.

Your cart is empty.

CP2100B Micsig Oscilloscope Probe AC/DC Current Probes, 2.5MHz Bandwidth 10A/100A Low Current Probe, Current Measuring Tool with Standard BNC Interface

4.6 (1) Write Review
Free shipping on orders over $29.99

$399.00

$ 99 .00 $99.00

In Stock

About this item

  • 【Powerful features】 Micsig CP2100B Bandwidths up to 2.5MHz, Maximum measurable current 100Apk, 70.7Arms (DC+ACpk); Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually.
  • 【Applies for Oscilloscope and Multimeter】 The CP2100 series is a current probe that can measure both DC and AC. Adopt standard BNC interface, applicable to oscilloscope with all BNC interfaces, and adapter can also be used for multimeter
  • 【USB Power Supply】 With USB power supply, clamp current probe can be directly connected to the oscilloscope USB. With the use of the oscilloscope, the measurement is more accurate and efficient
  • 【AC/DC Current Probe】 This DC-AC current probe can be widely used in motor drive, power frequency, inverter, power supply and avionics
  • 【Convenient Carriage】 Current probe meter with the split design, the appearance is small and delicate, with carrying case, easy to carry, and the measurement is more safe


Product Description

Micsig AC/DC Current Probes

Feature:

1. The CP2100 series is a current probe that can measure both DC and AC.

2. It is a split-type design that is small and beautiful.

3. It uses a standard BNC interface for oscilloscopes or a multi-connector for adapters.

4.The maximum current that can be measured is 100Apk (70Arms); CP2100B measurable bandwidth range is DC~2.5MHz,The CP2100 series current probe has two optional ranges: 10A and 100A .

5.With automatic and manual zero adjustment, USB power supply, no additional power supply, making measurement more convenient.

6.Often used in motor drive, power frequency, inverter, power supply, avionics and other fields.

Package List:

  • 1x CP2100B Probe
  • 1x Carry Box
  • 1x USB Cable
Current Measuring Tool

Specification:

Model: CP2100B
Bandwidth: DC~2.5MHz
Rise Time: ≤140ns
Ranges: 10A/100A
Output Sensitivity: 0.1V/A (10A); 0.01V/A (100A)
DC Accuracy (typical): 3%±50mA (10A); 4%±50mA(100A,500mA~40Apk); 15%(100A,40Apk~100Apk)
Singnal Delay: ＜150ns(10A); ＜200ns(100A)
Current Measurement Range: 50mA~10Apk(10A); 1A~100Apk(100A)
Max. Measuring Current: 100Apk,70.7Arms(DC+ACpk); 200Apk-pk,70.7Arms(AC)
Max. Working Voltage: CAT Ⅲ 300V CAT Ⅱ 600V
Max. Float Voltage: CAT Ⅲ 300V CAT Ⅱ 600V
Max. Conductor Diameter: 13mm
Overload Alarm: Buzzer beeps, Button flashes
Power Supply: DC5V

Hollywood
2024-11-14 10:28:27
Worked well for monitoring gate drive charge at low amp scale. Nice offset correction. A good value! I used a USB power supply as I use my USB port to take data.