Your cart is empty.
Your cart is empty.CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Honda Pilot and Passport (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
Yooper Curt
2025-08-29 10:34:54
I bought this wiring harness for my 2022 Honda Pilot. The Curt Mfg. Store on Amazon was very helpful in determining the harness I needed to order for our particular vehicle. It even has a notice if you select a harness that will not work for your vehicle. The step-by-step instructions were easy to follow. The harness came with everything you need to install the harness and make it operation, including the fuses. I also found a helpful YouTube video to aid in the installation. It took me about an hour to install the harness and put the inside vinyl panels that were removed or loosened back in place in the car. Hooked up my bike rack light assembly and it worked perfectly for taillights, turn signals, and brake lights. I would recommend this wiring harness kit for purchase. I would think that other Curt Mfg. wiring harnesses for different vehicles would be similar in quality and ease of installation.
Customer
2025-08-14 14:22:21
Instructions were easy to follow and the item plugged right in and worked as described. Definitely would recommend! It was a snap!Great value for the money especially ease of installation and detailed instructions, could have been done by a child.
Kurt
2025-07-30 10:56:33
We were moving and I had left already to start the new job. We ordered this and my wife, who’s only somewhat technical was able to install it without any issues. Works great! Product was a perfect fit.
Tnmarathoner
2025-07-09 11:35:07
Item worked perfectly. Honda made it a “little difficult†to attach without following directions and taking a lot of things apart. But ... insert inline fuse first, remove jack cover and jack, remove emergency gas release (EGR) cover, then feed female connection white box (CWB) up through jack area into EGR area. Use a small mirror to locate male CWB, rotate female CWB, reach up in there and try to fit the two together. Although it took a couple of tries, it was MUCH easier than following the directions and taking all kinds of things apart. Just do it! Use a couple of the zip ties to attach the cable onto the EGR support, remove the screw from the front of the EGR support for grounding, then replace covers and the jack. Don’t forget to place the purple fuse in the fuse box behind the engine. This worked for me; there is a YouTube video that I found discussing this method. If Honda had just added a few more inches to the male CWB this would have been so much easier. But, if I could do this, you probably can as well.
Clair Crossland
2025-07-07 21:16:18
I bought this wiring harness and successfully installed it in our 2016 Honda Pilot IN SPITE OF the CURT installation instructions. Of the 14 steps for installation, 7 are totally unnecessary. There is no need to disconnect the negative battery terminal, which is a real pain in the Pilot. Next they have you pulling out most of the car's interior trim in the rear area. There is no need to do that. Just pop off the cover for the car jack access (driver's side rear corner) and the cover for the electrical access just above it. That eliminates steps 1-6 and all the replacements in step 13. Feed the white connector from the wiring harness up from the jack access area to the electrical access area. Feel around in the electrical access area until you locate the rectangular connector housing. Work it down far enough for you to attach the white connector from the harness and click it on. Unscrew one of the metal screws on the metal bracket in the same area and attach the grounding wire. Insert the 10 amp fuse in the red fuse holder. Here you have a choice: The instructions call for just dangling the 4-flat plug out the back of the car when it is use and coiling it up inside the car when not in use. I'm sure that is adequate but I didn't like that idea. Instead, I popped out the drain plug in the jack compartment and fed the 4-flat through the hole. I cut a slit in the edge of the drain plug and removed enough of the center so the wiring fits through the center of the plug. (When everything was in place I put a dab of silicon on the underside of the drain plug where the wire goes through just to make sure there will be no leaks.) Next, I fed the 4-flat and wire through the brackets supporting the rear bumper and over to the far side of the hitch. I pulled enough wire so the 4-flat reaches to the chain ring on the hitch. I fed the 4-flat through the ring then used the loop of the dust cover to secure it in place. Whichever choice you selected, use the adhesive pad to stick the converter box to the floor of the jack compartment where it will be out of the way. Coil up any excess wiring and secure it with the cable ties. Replace the 2 access panels. Install the 30 amp fuse in the fuse box under the hood as directed. BTW: The trailer lights worked as expected.
drdipstick
2025-06-06 20:35:11
This wiring harness is easy to install if you read and follow the directions closely. The pictures are very helpful. A familiarity with wiring, hand tools and a battery operated or electric drill is helpful. It is also helpful to have a stiff blade putty knife or similar tool for dislodging the plastic inner panels required to access the factory harness without damaging them. I also suggest that the work be done in a heated space to avoid any damage to the plastic panels that could occur in extremely cold weather. I also used a small piece of 2X4 wood to block open the side panel to allow two hand access to the wiring connections. I installed this harness on a 2016 Pilot and used the jack storage box as the storage compartment for the trailer harness. I also attached the ground wire under the inside back lower panel by drilling a small hole in the car body and using the supplied self taping screw. The fuse location under the hood is easy to find and identify.
S. Corman
2025-06-02 11:21:39
We purchased this for a hitch installed on our 2016 Honda pilot works perfectly and it was easy to install
Jon Hargis
2025-04-09 16:32:18
Easy install. Highly recommend you watch the tube video made by uhaul. Instructions are not Great.
judy
2025-04-07 17:38:13
Worked great easy to install.
WHIPAAZ
2025-04-05 11:18:51
Working perfectly! Easy plug in for install on my 2017 Honda Pilot. Cord is long and has enough length to reach trailer with plenty room. Includes 30A vehicle fuse and 10A for module.
Customer
2025-03-16 18:31:11
Installed this myself; a lot of information can be found online. No issues with the few times I’ve used it.
Morkos
2025-03-11 12:58:41
Follow step by step and in 15 minutes I was done
Jose B.
2024-12-15 16:18:03
Installation facile en 20 minutes, voir video sur youtube, sur un honda pilot touring 2018.
Recommended Products
