Shopping Cart

Your cart is empty.

Your cart is empty.

Danfoss 030F6103 0.35 Gallon, 60 Degree, OD S Solid Oil Nozzle | OEM Replacement Nozzle in Diesel Fired Aqua Hot & Hydro Hot Units | For Commercial High-Pressure Oil Burners

4.6 (1) Write Review
Free shipping on orders over $29.99

$24.99

$ 11 .99 $11.99

In Stock

About this item

  • Danfoss Oil Nozzle 030F6103, 0.35 GPH, 60° S - Oil Nozzle Same As Aqua Hot WPX-886-41A (
  • Diesel fuel nozzle used on all diesel fired Aqua-Hot and Hydro Hot units. .35 micron /60 degrees
  • To achieve quality results, Danfoss test each nozzle electronically for capacity and spray pattern.
  • It is recommended to change the nozzle once a year to maintain top operating performance as soot deposits can obstruct a stable spray of oil.
  • UPC/EAN: 5702425042966


Oil nozzles type OD are designed for domestic and commercial high-pressure oil burners operating with light or heavy fuel. The available Oil furnance nozzle features a 60 degree spray angle, S Solid spray pattern in size of 35.0 USgal/h. As to construction and atomizing, the OD nozzle is the basic model for all Danfoss oil nozzles.
OEM Replacement for Aqua Hot WPX-886-41A (WPX88641A) and FLX-013-150 diesel fuel nozzles
Compatibility:
Used On Aqua Hot Models: AHE-100-00S, AHE-100-01S, AHE-100-02S, AHE-100-03S, AHE-100-04S, AHE-101-000, AHE-120-03X, AHE-120-04X, AHE-130-03X, AHE-130-04X, AHE-375-D02, AHE-375-D03, AHE-450-DE1, AHE-450-DE2, AHE-450-DE3, AHE-525-D02, AHE-600-D01, AHE-600-D02, AHE-600-D03
Used On Hydro Hot Models: HHE-200-07E, HHE-500-07M, HHE-200-08E, HHE-500-08M, HHE-200-09E, HHE-500-09M
Used On Webasto Models: DBW 2010, DBW 2020
Capacity: 1.35 kg/h/0.35 gal/h
Filter grade [µm]: 30
Filter type: Sinter
Specification point: 10 bar, 3.4 cSt, 840 kg/m³
Spray angle: 60 degrees
Spray pattern: Solid


Rentier
2024-12-04 15:40:19
Nach etwas hekeliger Lieferung korrekte Düsen erhalten.Gern wieder